Abstract:The precise tuning of the active layer morphology to improve organic solar cells (OSCs) efficiency remains a key issue in the field of organic photovoltaics. Herein, a new solution to the above problem is provided by using the dual‐solvent modulated polymer‐assisted sequential spin‐coating method. Herein, the sequential spin‐coated OSCs based on the D18‐Cl/Y6 system are prepared for the first time and an efficiency of 16.38% is obtained, similar to that of bulk heterojunction OSCs. On this basis, the performance is further improved by using a dual solvent to balance the dissolution and crystallization of D18‐Cl, separately optimizing the morphology of the donor layer and allowing the subsequent spin‐coated Y6 solution to penetrate uniformly into the D18‐Cl framework. After the dual‐solvent treatment, the D18‐Cl (CF + CB)/Y6‐based device obtains a power conversion efficiency (PCE) of 17.33% and the D18‐Cl (THF + CB)/Y6‐based device achieves an even better PCE of 17.73%. It is worth noting that no post‐treatment is adopted here and after 2500 h of placement, the efficiency of the aforementioned devices is still 90% of the original. Thus, this work provides a simple method for tuning the film morphology to prepare efficient and stable devices, which is beneficial for future commercial production of OSCs. The use of the dual‐solvent‐assisted sequential spin‐coating method for precisely tuning active layer morphology to fabricate high efficient and stable organic solar cells is presented. Without any post‐treatment, D18‐Cl (THF + CB)/Y6‐based devices achieved an efficiency of up to 17.73%, thus facilitating the future commercial production of organic solar cells.

Self-Cleaning Organic Solar Cells Based On Micro/Nanostructured Haze Films With Optical Enhancement Effect

Light Harvesting Improvement of Organic Solar Cells with Self-Enhanced Active Layer Designs

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area

Self-assembly enables simple structure organic photovoltaics via green-solvent and open-air-printing: Closing the lab-to-fab gap

Efficient organic solar cells enabled by sustainable and synergetic device engineering

Wearable and Self-Cleaning Hybrid Energy Harvesting System based on Micro/Nanostructured Haze Film

Highly Efficient and Stable ITO-Free Organic Solar Cells Based on Squaraine N-Doped Quaternary Bulk Heterojunction

High‐Efficiency Sequential‐Cast Organic Solar Cells Enabled by Dual Solvent‐Controlled Polymer Aggregation

Ultra‐Thin Flexible ITO‐free Organic Solar Cells with Gradient Bilayer Electron Transport Materials

High‐Performance Upscaled Indium Tin Oxide–Free Organic Solar Cells with Visual Esthetics and Flexibility

Toward Low-Cost, High-Efficiency, and Scalable Organic Solar Cells with Transparent Metal Electrode and Improved Domain Morphology

20.4% Power conversion efficiency from albedo-collecting organic solar cells under 0.2 albedo

Efficient and stable organic solar cells enabled by multicomponent photoactive layer based on one-pot polymerization

Efficient organic solar cells with the active layer fabricated from glovebox to ambient condition

Phase separation and domain crystallinity control enable open‐air‐printable highly efficient and sustainable organic photovoltaics

Mechanically and Ultraviolet Light Stable Ultrathin Organic Solar Cell via Semi‐Embedding Silver Nanowires in a Hydrogen Bonds‐Based Polyimide

A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer

Efficient Semitransparent Organic Solar Cells with Highly Transparent Metal Front Electrodes

Simultaneous efficiency enhancement and self-cleaning effect of white organic light-emitting devices by flexible antireflective films.