Abstract:Bridges constitute important elements of the transportation network. A vast part of the Italian existing infrastructural system dates to around 60 years ago, which implies that the related bridge structures were constructed according to past design guidelines and underwent a probable state of material deterioration (e.g., steel corrosion, concrete degradation), especially in those cases in which proper maintenance plans have not been periodically performed over the structural lifetime. Consequently, elaborating rapid yet effective safety assessment strategies for existing bridge structures represents a topical research line. This contribution presents a systematic experimental-numerical approach for assessing the load-bearing capacity of existing prestressed concrete (PC) bridge decks. This methodology is applied to the Longano PC viaduct (southern Italy) as a case study. Initially, natural frequencies and mode shapes of the bridge deck are experimentally identified from vibration data collected in situ through Operational Modal Analysis (OMA), based on which a numerical finite element (FE) model is developed and calibrated. In situ static load tests are then carried out to investigate the static deflections under maximum allowed serviceability loads, which are compared to values provided by the FE model for further validation. Since prestressing strands appear corroded in some portions of the main girders, numerical static nonlinear analysis with a concentrated plasticity approach is finally conducted to quantify the effects of various corrosion scenarios on the resulting load-bearing capacity of the bridge at ultimate limit states. The proposed methodology, encompassing both serviceability and ultimate conditions, can be used to identify critical parts of a large infrastructure network prior to performing widespread and expensive material test campaigns, to gain preliminary insight on the structural health of existing bridges and to plan a priority list of possible repairing actions in a reasonable, safe, and costly effective manner.

Remarks on the Collapse of the Polcevera Viaduct

Safety of infrastructures: A case study

Safety of existing infrastructures: The collapse of the Morandi bridge in Genoa

The Collapse of the Morandi’s Bridge: Remarks About Fatigue and Corrosion

Post-collapse Analysis of Morandi’s Polcevera Viaduct in Genoa Italy

Design of Footbridges Against Pedestrian-Induced Vibrations

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Disproportionate Collapse of a Cable-Stayed Bridge

Numerical simulations of collapse tests on RC beams

Seismic resilience of bridges in transportation networks

Robustness assessment of half-joint RC girder bridges

Risk-based probabilistic assessment of a bridge collapse due to abutments scour. A case study

A Combined Experimental-Numerical Framework for Assessing the Load-Bearing Capacity of Existing PC Bridge Decks Accounting for Corrosion of Prestressing Strands

Collapse analysis of the Polcevera viaduct by the applied element method

Progressive Collapses Simulation And Importance Assessment Of Stone Arch Bridge

State-of-the-Art Review on the Causes and Mechanisms of Bridge Collapse

Risorgimento Bridge in Rome: An a Posteriori Possible Assessment

Investigation of Common Causes of Bridge Collapse in Colombia

Intensity and location of corrosion on the reliability of a steel bridge

Street Network Resilience Put to the Test: The Dramatic Crash of Genoa and Bologna Bridges