Abstract:Bridges constitute important elements of the transportation network. A vast part of the Italian existing infrastructural system dates to around 60 years ago, which implies that the related bridge structures were constructed according to past design guidelines and underwent a probable state of material deterioration (e.g., steel corrosion, concrete degradation), especially in those cases in which proper maintenance plans have not been periodically performed over the structural lifetime. Consequently, elaborating rapid yet effective safety assessment strategies for existing bridge structures represents a topical research line. This contribution presents a systematic experimental-numerical approach for assessing the load-bearing capacity of existing prestressed concrete (PC) bridge decks. This methodology is applied to the Longano PC viaduct (southern Italy) as a case study. Initially, natural frequencies and mode shapes of the bridge deck are experimentally identified from vibration data collected in situ through Operational Modal Analysis (OMA), based on which a numerical finite element (FE) model is developed and calibrated. In situ static load tests are then carried out to investigate the static deflections under maximum allowed serviceability loads, which are compared to values provided by the FE model for further validation. Since prestressing strands appear corroded in some portions of the main girders, numerical static nonlinear analysis with a concentrated plasticity approach is finally conducted to quantify the effects of various corrosion scenarios on the resulting load-bearing capacity of the bridge at ultimate limit states. The proposed methodology, encompassing both serviceability and ultimate conditions, can be used to identify critical parts of a large infrastructure network prior to performing widespread and expensive material test campaigns, to gain preliminary insight on the structural health of existing bridges and to plan a priority list of possible repairing actions in a reasonable, safe, and costly effective manner.

Risk-based probabilistic assessment of a bridge collapse due to abutments scour. A case study

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Distribution of Shear Force: A Multi-Level Assessment of a Cantilever RC Slab

A generalized, model-free framework for assessing scour-induced bridge pier instability

A study of stone arch bridge's flood reliability through a surrogate model approach

Safety of existing infrastructures: The collapse of the Morandi bridge in Genoa

Bridge-specific flood risk assessment of transport networks using GIS and remotely sensed data

Remarks on the Collapse of the Polcevera Viaduct

Hydraulic Safety Evaluation and Dynamic Investigations of Baghetto Bridge in Italy

Strategic assessment of bridge susceptibility to scour

Analysis of Flood Resistance of Masonry Arch Bridges Combining Numerical Simulation and Probabilistic Analysis

Influence of local scour on the dynamic response of bridges under barge collisions

Safety of infrastructures: A case study

Risk-informed asset management to tackle scouring on bridges across transport networks

Safety assessment of existing prestressed reinforced concrete bridge decks through different approaches

Evaluation of bridge instability caused by dynamic scour based on fractal theory

Multihazard resilience and economic loss evaluation method for cable-stayed bridges under the combined effects of scour and earthquakes

A Combined Experimental-Numerical Framework for Assessing the Load-Bearing Capacity of Existing PC Bridge Decks Accounting for Corrosion of Prestressing Strands

Rapid Assessment Method of Buckling Stability of Bridge Pier–Cap–Pile System Under Scour Effect

A Probabilistic Strategy to Evaluate Scour Around Bridge Deepwater Foundations Considering a Reliability Assessment

Safety assessment of an existing bridge deck subject to different damage scenarios through the global safety format ECOV