Abstract:Physics of Fluids, Volume 34, Issue 7, July 2022. The control performance of a pulsed nanosecond dielectric barrier discharge (NSDBD) plasma actuator with varying pulse voltages and locations on a supersonic compression corner is studied using experiments and numerical simulations. The compression corner with a flat plate length of 60 mm and a ramp angle of 10° under laminar flow separation is experimentally investigated in a Ludwieg wind tunnel under a unit Reynolds number of 7.8 × 106 m−1 and Mach number of 4. The plasma actuators are placed either upstream or downstream of the separation point, extending in the spanwise direction. The Schlieren technique is used to visualize the shock wave interaction and estimate the propagation speed of the induced shock by the plasma actuator. For the numerical simulations, a one-zone inhomogeneous phenomenological plasma model is adopted to predict key discharge parameters and simulate the fast-heating region. The results show that the reduction of separation bubble length is up to 17% and 45%, respectively, in the cases of upstream and downstream of the separation point under a high applied voltage of 50 kV. The evolution of the flow structures is examined to reveal the underlying control mechanism. The results indicate that the high-speed external fluid is entrained into the original separation region after NSDBD activation upstream of the separation point, resulting in flow reattachment upstream of the corner. The entrained fluid with high momentum compels the main separation to move downstream, accompanied by the fragmentation of the original shear layer. Furthermore, the suppression of the separation region is more effective when the plasma actuator is installed close to the separation region and in the first 200 μs during one pulse, providing a good suggestion for the actuation frequency and installed location.

Mechanism of Compressor Airfoil Boundary Layer Flow Control Using Nanosecond Plasma Actuation

Compressor Airfoil Separation Control Using Nanosecond Plasma Actuation at Low Reynolds Number

Supersonic Compressor Cascade Flow Control Using Plasma Actuation at Low Reynolds Number

On Mechanism of Plasma-Shock-Based Flow Control

Control of the Aero-Engine Nacelle Intake Flow Separation Caused by Crosswind Condition Using Plasma Actuation

A parametric study on control authority and vorticity transport in a compressor airfoil with plasma actuation at low Reynolds number

Nanosecond Pulsed Plasma Flow Control: Progress and Problems

Internal Flow Control Mechanism Near Wall Region with Unsteady Plasma Actuation

Shock Wave-Boundary Layer Interactions Control by Plasma Aerodynamic Actuation

Study of the Boundary Layer on a Plate Aerodynamically Excited and Controlled by Using Nanosecond Pulse Plasma

Swept Shock Wave/boundary Layer Interaction Control Based on Surface Arc Plasma

Experimental Investigation on Compression Ramp Shock Wave/boundary Layer Interaction Control Using Plasma Actuator Array

Nanosecond Pulsed Discharge Plasma Actuation: Characteristics and Flow Control Performance

Control of Compressor Tip Leakage Flow Using Plasma Actuation

Experimental Investigation on Airfoil Suction Side Flow Separation by Pulse Plasma Aerodynamic Actuation

Shockwave-Boundary Layer Interaction Control by Plasma Aerodynamic Actuation: an Experimental Investigation

Control of Corner Separation with Plasma Actuation in A High-Speed Compressor Cascade

Control of supersonic compression corner flow using a plasma actuator

Investigation of transition flow on suction surface of highly loaded compressor cascade controlled by plasma actuator

Experimental study on surface arc plasma actuation-based hypersonic boundary layer transition flow control

Control of Crossflow Instability over a Swept Wing Using Dielectric-Barrier-discharge Plasma Actuators