Abstract:Physics of Fluids, Volume 34, Issue 7, July 2022. The control performance of a pulsed nanosecond dielectric barrier discharge (NSDBD) plasma actuator with varying pulse voltages and locations on a supersonic compression corner is studied using experiments and numerical simulations. The compression corner with a flat plate length of 60 mm and a ramp angle of 10° under laminar flow separation is experimentally investigated in a Ludwieg wind tunnel under a unit Reynolds number of 7.8 × 106 m−1 and Mach number of 4. The plasma actuators are placed either upstream or downstream of the separation point, extending in the spanwise direction. The Schlieren technique is used to visualize the shock wave interaction and estimate the propagation speed of the induced shock by the plasma actuator. For the numerical simulations, a one-zone inhomogeneous phenomenological plasma model is adopted to predict key discharge parameters and simulate the fast-heating region. The results show that the reduction of separation bubble length is up to 17% and 45%, respectively, in the cases of upstream and downstream of the separation point under a high applied voltage of 50 kV. The evolution of the flow structures is examined to reveal the underlying control mechanism. The results indicate that the high-speed external fluid is entrained into the original separation region after NSDBD activation upstream of the separation point, resulting in flow reattachment upstream of the corner. The entrained fluid with high momentum compels the main separation to move downstream, accompanied by the fragmentation of the original shear layer. Furthermore, the suppression of the separation region is more effective when the plasma actuator is installed close to the separation region and in the first 200 μs during one pulse, providing a good suggestion for the actuation frequency and installed location.

Nanosecond Pulsed Discharge Plasma Actuation: Characteristics and Flow Control Performance

Nanosecond Pulsed Plasma Flow Control: Progress and Problems

Experimental Investigation of Nanosecond Discharge Plasma Aerodynamic Actuation

Plasma Sheet Actuator Driven by Repetitive Nanosecond Pulses with a Negative DC Component

Numerical Simulation and Experimental Validation of Pulsed Nanosecond Plasma Aerodynamic Actuation in Air Under Atmospheric Pressure

On Mechanism of Plasma-Shock-Based Flow Control

Simulation of Nanosecond Pulsed Dbd Plasma Actuation with Different Rise Times

Influence of Excitation Voltage Waveform on Dielectric Barrier Discharge Plasma Aerodynamic Actuation Characteristics

Atmospheric-pressure pulsed plasma actuators for flow control: shock wave and vortex characteristics

Modelling Of Plasma Aerodynamic Actuation Driven By Nanosecond Sdbd Discharge

Control of supersonic compression corner flow using a plasma actuator

Characteristics of Nanosecond Pulse Surface Dielectric Barrier Discharge in Air Flow

Experimental Analysis of Flow Separation Control by a Dielectric Barrier Discharge Plasma Actuator in Burst-in-Burst Actuation Mode

Mechanism of Compressor Airfoil Boundary Layer Flow Control Using Nanosecond Plasma Actuation

Investigation on the Characteristics of Dielectric Barrier Surface Discharge Driven by Repetitive Nanosecond Pulses in Airflows

Supersonic Compressor Cascade Flow Control Using Plasma Actuation at Low Reynolds Number

Compressor Airfoil Separation Control Using Nanosecond Plasma Actuation at Low Reynolds Number

Study on the spark discharge plasma jet driven by nanosecond pulses

Flow Separation Control on Swept Wing with Nanosecond Pulse Driven DBD Plasma Actuators

Experimental Investigation on the Characteristics of Sliding Discharge Plasma Aerodynamic Actuation

Flow Separation Control of Nacelle in Crosswind by Microsecond Pulsed Surface Dielectric Barrier Discharge Plasma Actuator