Abstract:During operation, compressed air energy storage systems should respond rapidly to variations in power network demand, requiring that the compression system should always be in changeable off-design conditions. Compression systems with low flow rates confront difficulties such as diminished aerodynamic performance and increased flow losses. Given that the emergence of compressor instability is a process of the accumulation and intensification of flow unsteadiness. In this study, a numerical simulation was conducted for a transonic compressor to investigate the unsteady evolution characteristics of the tip leakage flow field, and it focused on the flow field of a condition where the flow unsteadiness was stimulated and further investigated the origin of flow unsteadiness, which was supposed to provide insights in developing flow control strategies and enable the application in a compressed air energy storage system under low mass flow rate conditions. The Fourier fast transformation (FFT) signal analysis showed that characteristic frequency of the unsteady tip flow field was 1863.3 Hz. Unsteady disturbances were predominantly distributed in the following three regions: the leakage vortex region of the blade suction surface, the location of the epitaxially detached shock wave at the entrance of passage, and the 5 %–30 % chord of the blade pressure surface. The high disturbance region of leakage vortex was generated by the periodic shift in leakage vortex intensity over time, the interaction between the main flow and various types of secondary flow due to leakage vortex breaking processes was the primary cause for the disturbance region of the epitaxially detached shock wave at the entrance of passage, and the high disturbance region of blade pressure surface was caused by the adverse pressure gradient effect and flow direction deflection of the airflow in the passage, as well as the impacted on the pressure surface of the adjacent blade. It was speculated that leakage vortex breakdown due to vortex wave interference was the key factor to induce the unsteadiness of the flow field. A new vortex structure was formed at the leading edge of adjacent blades after leakage vortex breakdown, which was defined as a “leading edge vortex”, and its series of evolutionary processes occurring timely were the main reasons for the unsteady flow in the tip flow field. This study laid a theoretical foundation for the research of the flow field control strategy of axial compressor operating in off-design conditions in a large-scale compressed-air energy storage system.

Internal Flow Control Mechanism Near Wall Region with Unsteady Plasma Actuation

Tip Leakage Vortex Control in a Low Speed Axial Compressor Using Pulsed Plasma Actuation

Control of Compressor Tip Leakage Flow Using Plasma Actuation

Mechanism of Compressor Airfoil Boundary Layer Flow Control Using Nanosecond Plasma Actuation

Investigation of Endwall Flow Behavior with Plasma Flow Control on A Highly Loaded Compressor Cascade

A parametric study on control authority and vorticity transport in a compressor airfoil with plasma actuation at low Reynolds number

A Study on the Mechanism of Tip Leakage Flow Unsteadiness in an Isolated Compressor Rotor

Investigation of transition flow on suction surface of highly loaded compressor cascade controlled by plasma actuator

Compressor Airfoil Separation Control Using Nanosecond Plasma Actuation at Low Reynolds Number

Supersonic Compressor Cascade Flow Control Using Plasma Actuation at Low Reynolds Number

Control of Corner Separation with Plasma Actuation in A High-Speed Compressor Cascade

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

Computational and experimental investigation of plasma aerodynamic actuation based corner flow separation control in a compressor cascade

Control of the Corner Separation in a Compressor Cascade by Steady and Unsteady Plasma Aerodynamic Actuation

Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall

Experimental Investigation On The Plasma Flow Control Of Axial Compressor Rotating Stall

Kriging Surrogate Model Applied in the Mechanism Study of Tip Leakage Flow Control in Turbine Cascade by Multiple DBD Plasma Actuators

Investigation of the unsteady flow in a transonic axial compressor adopted in the compressed air energy storage system

Experimental Investigation of Using Plasma Aerodynamic Actuation to Extend Low-Speed Axial Compressor's Stability

Flow instability control of an ultra-highly loaded transonic compressor rotor using self-excited casing bleed

Control of Stationary Crossflow Modes in Swept Hiemenz Flows with Dielectric Barrier Discharge Plasma Actuators