Abstract:Pyrolysis catalysis is a promising method for converting waste plastics into high-value products from both economic and environmental perspectives. A low-cost catalyst is crucial for the batch treatment of waste plastics. In this study, a novel nickel catalyst based on coal gangue was prepared by impregnation. The catalyst is not only inexpensive, but also exhibits excellent catalytic performance in the pyrolysis of plastics. Polyethylene was pyrolyzed in a two-stage fixed-bed reactor to produce carbon nanotubes and hydrogen. The effects of catalytic temperatures on the production of hydrogen and carbon nanotubes from the catalyst were investigated. The maximum concentration and yield of hydrogen were 66.48 vol.% and 31.48 mmol/gplastic at 750 °C. Various techniques were used to fully characterize the carbon deposition, such as electron microscopy, temperature programmed oxidation, X-ray diffraction and Raman spectroscopy. The results showed when the catalytic temperature is 800 °C, the graphitization degree of obtained carbon was higher and the defects was fewer. The Raman IG/ID of the product was 0.72, which exceeded the graphitization of many industrially synthesized carbon nanotubes. It is also found that the catalytic temperature was very important for the hydrogen yield and the growth of carbon nanotubes. The temperature is too low, the catalyst activity is insufficient. If the temperature was too high, the metal particles in the catalyst would agglomerate, resulting in the reduction of the catalyst active site and catalyst deactivation. Therefore, it is necessary to select a suitable temperature to achieve the co-production of hydrogen and carbon nanotubes from waste plastics. This study provides a new and effective way for the catalytic pyrolysis of waste plastics and the comprehensive utilization of coal gangue.

Preparation of Iron- and Nitrogen-Codoped Carbon Nanotubes from Waste Plastics Pyrolysis for the Oxygen Reduction Reaction

Catalytic upcycling of waste polypropylene for gram-scale production of FeCo@N-doped carbon nanotubes toward efficient oxygen reduction electrocatalysis

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Bimetallic Carbon Nanotube Encapsulated Fe-Ni Catalysts from Fast Pyrolysis of Waste Plastics and Their Oxygen Reduction Properties

Fabrication of Fe-Zr, Co-Zr, and Ni-Zr Catalysts to Boost CNTs Synthesis from Plastic Wastes and the Electrocatalytic Oxygen Evolution Reaction

Fe/N Co-Doped Hierarchically Porous Carbon on N-doped Carbon Nanotubes Towards Oxygen Reduction Reaction

Microwave-assisted synthesis and prototype oxygen reduction electrocatalyst application of N-doped carbon-coated Fe 3 O 4 nanorods

Carbon nanotubes from post-consumer waste plastics: Investigations into catalyst metal and support material characteristics

Theophylline-regulated pyrolysis synthesis of nitrogen-doped carbon nanotubes with iron-cobalt nanoparticles for greatly boosting oxygen reduction reaction

One-step preparation of a N-CNTs@Ni foam electrode material with the co-production of H2 by catalytic reforming of N-containing compound of biomass tar

Upcycling of plastic waste into carbon nanotubes as efficient battery additives†

In Situ Derived Fe/N/S-Codoped Carbon Nanotubes From Zif-8 Crystals As Efficient Electrocatalysts For The Oxygen Reduction Reaction And Zinc-Air Batteries

Solvent Recyclable Synthesis of Nitrogen‐Rich Nanotubes with Embedded CoFe Nanoparticles for Electrochemical Oxygen‐Involving Reactions

Production of Carbon Nanotubes Via Catalytic Pyrolysis of Waste Plastics over Ni/Al2O3 Catalyst: the Influence of Plastic Types

Mass Production of Nitrogen and Oxygen Codoped Carbon Nanotubes by a Delicately-Designed Pechini Method for Supercapacitors and Electrocatalysis.

Fe–N x sites coupled with Fe 3 C on porous carbon from plastic wastes for oxygen reduction reaction

Short nanotubular Fe-N-C catalysts with curved catalytic sites and contributing regions for oxygen reduction reaction

Fe/N/C Carbon Nanotubes with High Nitrogen Content As Effective Non-Precious Catalyst for Oxygen Reduction Reaction in Alkaline Medium

Fe-Nx sites coupled with Fe3C on porous carbon from plastic wastes for oxygen reduction reaction

Nitrogen-Doped Carbon Nanotubes Derived From Zn-Fe-Zif Nanospheres And Their Application As Efficient Oxygen Reduction Electrocatalysts With In Situ Generated Iron Species

A Novel Nickel Catalyst Supported on Coal Gangue for Producing Hydrogen and Carbon Nanotubes from Waste Plastics