Abstract:ConspectusSince carbon-based energy continues to dominate (over 80%) the global primary energy supply, carbon dioxide capture, utilization, and sequestration (CCUS) is deemed to be a promising and viable option to mitigate greenhouse gas emissions and climate change, for which CO2 capture is critical to the overall success of CCUS. Although liquid amine scrubbing is a mature technology for carbon capture, it is energy-intensive and costly due to energy consumption in solvent heating and water evaporation apart from the energy needed to break amine-CO2 bonding. To address this challenge, Song's group developed a new design approach for adsorptive CO2 capture and separation, namely, "molecular basket" sorbents (MBS), without the need for dealing with solvent heating and water evaporation. The solid MBS consisting of polymeric amines (such as PEI) immobilized into nanoporous materials (such as SBA-15) possesses a high capacity for CO2 capture with high selectivity, fast kinetics, and good regenerability. Consequently, MBS can greatly reduce energy consumption and carbon capture cost. Conventional adsorbents such as zeolites, activated carbon, alumina, and silica have low adsorption capacities, and their use of CO2 adsorption requires prior removal of moisture and cooling of flue gas (∼35 °C). On the contrast, the CO2 sorption capacity of MBS can even be promoted by the presence of moisture/steam and reaches the best performance closer to flue gas temperature (∼75 °C). This Account presents an overview of our research progress in the material development and fundamental understanding of MBS for CO2 capture and the separation of CO2 from various gas streams. It begins with an illustration of the MBS concept, followed by efforts to improve the performance and pilot-scale demonstration of MBS for CO2 capture. With the systematic characterization of MBS by various ex situ and in situ techniques, a better understanding is developed for the CO2 sorption process mechanistically. Furthermore, this Account demonstrates how the fundamental understanding of the CO2 sorption mechanism promotes the further development of more robust and advanced sorbent materials with improved CO2 sorption capacity, kinetics of sorption and desorption, and cyclic stability. Finally, an outlook is provided for the future design and development of novel sorbent materials and the CO2 sorption process for various gas streams including flue gas, biogas, air, and hydrogen streams.

Development of the Solid Sorbent Technology for Post Combustion CO2 Capture Towards Commercial Prototype

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Continuous CO 2 Capture in a Circulating Fluidized Bed Using Supported Amine Sorbents

Post-Combustion CO2 Capture Demonstration Using Supported Amine Sorbents: Design and Evaluation of 200 Kwth Pilot

Experimental study of CO2 capture from air via steam-assisted temperature-vacuum swing adsorption with a compact kg-scale pilot unit

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation

Lime-based sorbents for high-temperature CO2 capture--a review of sorbent modification methods

Development of sorbent materials for direct air capture of CO2

Development of a Steel-Slag-Based, Iron-Functionalized Sorbent for an Autothermal Carbon Dioxide Capture Process.

Developing High-Capacity Solid "Molecular Basket" Sorbents for Selective CO2 Capture and Separation

Investigation of Thermal Stability and Continuous CO2 Capture from Flue Gases with Supported Amine Sorbent

Degradation Study of a Novel Polymorphic Sorbent under Realistic Post-Combustion Conditions

Practical Experience in Post-combustion CO2 Capture Using Reactive Solvents in Large Pilot and Demonstration Plants

How much can novel solid sorbents reduce the cost of post-combustion CO2 capture? A techno-economic investigation on the cost limits of pressure-vacuum swing adsorption

Development of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions

CO2 Capture at Medium to High Temperature Using Solid Oxide-Based Sorbents: Fundamental Aspects, Mechanistic Insights, and Recent Advances.

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Scaling up 3D printed hybrid sorbents towards (cost) effective post-combustion CO 2 capture: A multiscale study

Recent Developments and Consideration Issues in Solid Adsorbents for CO 2 Capture from Flue Gas