Abstract:Twin grain boundaries (GBs) are found to be inherently resistant to stress corrosion cracking (SCC), which has become one of the main failure mechanisms of steam generator (SG) tubing since the 1980s and brings huge economic losses to the nuclear power plants. As it is a widely used material for SG tubing, the SCC-resistance of the twins in Alloy 690TT in 10 wt.% sodium hydroxide solution with 100 ppm litharge at 330 degrees C was studied using C-ring samples. The relationship between the crack paths, twin GBs and the residual strains in the studied areas were analyzed using an environmental scanning electron microscope (ESEM) equipped with electron backscatter diffraction (EBSD) equipment. A continuously stressed C-ring sample without immersion was used to evaluate the effect of residual stress or strain on the microstructure of the twin GBs. The oxides at the crack paths were analyzed by an energy dispersive spectroscopy (EDS). The results show that many twin GBs are cracked during crack propagation. There are more twins with large deviations from the ideal Sigma 3 twin misorientation in the studied area where the residual strain is high. In situ EBSD analyses verify that higher residual strain causes twins to deviate from the ideal twin microrientation and can even promote twins transiting into random high angle grain boundaries, when the residual strain is high enough. The EDS result illustrates that litharge accelerates the dissolution of the chromium and nickel in the matrix. Overall, the SCC-resistance of the twins in Alloy 690TT in the studied solution is reduced by the destruction of the ideal microrientation of the twin GBs and the preferential dissolution of chromium and nickel at the crack paths. Higher residual strain on the Alloy 690TT and deleterious impurities in the circulating secondary water should be eliminated during the operation of nuclear power plants. (C) 2011 Elsevier B.V. All rights reserved.

The Effect of Grain Boundary Structure on the Intergranular Degradation Behavior of Solution Annealed Alloy 690 in High Temperature, Hydrogenated Water

The Effect of Grain Boundary Structure on the Intergranular Degradation Behavior of Solution Annealed Alloy 690 in Simulated Pressurized Water Reactor Primary Environment

The Structure Dependence of Grain Boundary Passivation of Alloy 690 in High Temperature Water

The structure dependence of oxidation behavior of high-angle grain boundaries of alloy 600 in simulated pressurized water reactor primary water

The Effects of Grain Boundary Structure and Bulk Cr Content on Grain Boundary Degradation Behavior of Ni-Cr Binary Alloys in High Temperature CO2

The Effects of Grain Boundary Carbide Density and Strain Rate on the Stress Corrosion Cracking Behavior of Cold Rolled Alloy 690

The correlation between the dislocation slip/grain boundary interaction mode and the resistance to SCC initiation of Alloy 690 in simulated PWR primary water

The Effect of Cold Rolling on Grain Boundary Structure and Stress Corrosion Cracking Susceptibility of Twins in Alloy 690 in Simulated PWR Primary Water Environment

Insights into the Superior Stress Corrosion Cracking Resistance of FeCrAl Alloy in High Temperature Hydrogenated Water: the Critical Role of Grain Boundary Oxidation

Intergranular corrosion of Ni-30Cr in high-temperature hydrogenated water after removing surface passivating film

Effect of Intergranular Carbides on the Cracking Behavior of Cold Worked Alloy 690 in Subcritical and Supercritical Water

Effect of Grain Boundary Character Distribution on Stress Corrosion Cracking Behavior in Austenitic Stainless Steels

Effect of Grain Boundary Behaviour on Ductility Dip Cracking Mechanism

Effects of grain boundary character distribution on hydrogen-induced cracks initiation and propagation at different strain rates in a nickel-saving and high-nitrogen austenitic stainless steel

Quantitatively evaluating the contribution of intergranular carbides, Cr-depleted zone, and grain boundary to intergranular stress corrosion cracking of Alloy 600 in a simulated boiling water reactors environment with high oxygen concentrations

Effect of Mono-Tension and Biaxial Tension on Microstructure and Stress Corrosion Cracking of Alloy 690TT

Strain Rate Dependence of the Effect of Intergranular Carbides on the Resistance to Stress Corrosion Cracking Initiation of Alloy 690 in Simulated Pwr Primary Water

The Intergranular Oxidation Behavior of Low-Angle Grain Boundary of Alloy 600 in Simulated Pressurized Water Reactor Primary Water

Effects of Cold Working Degrees on Grain Boundary Characters and Strain Concentration at Grain Boundaries in Alloy 600

Trans-twins Stress Corrosion Cracking Behaviors of Alloy 690TT in Lead-Containing Caustic Solution at 330°C

A High-Resolution Characterization of the Initiation of Stress Corrosion Crack in Alloy 690 in Simulated Pressurized Water Reactor Primary Water