Abstract:Summary Recycled steel wire is taken from used tires, and by procedures like mechanical cutting and friction treatment, it can be converted into industrial recycled steel fiber that meets precise criteria. Such green fiber may effectively limit the growth of fractures in concrete and diffuse the fracture energy of concrete when incorporated into concrete. An investigation of the effects of materials and horizontal reinforcement spacing on the seismic performance of shear wall specimens is presented in this research. The test and numerical simulation findings indicate that the RSFRC (recycled steel fiber reinforced concrete) shear wall's fracture is substantially narrower than that of a conventional shear wall and that the shear carrying capacity and deformation ductility of the shear wall have been greatly enhanced. The energy dissipation capacity of the RSFRC shear wall specimen with varying horizontal reinforcement spacing is significantly enhanced when compared to the conventional shear wall, and the ultimate displacements are reduced. RSFRC shear wall specimen has higher stiffness in the early stage, and the overall stiffness decreases slowly. With the decrease of fiber volume fraction of RSFRC shear wall in a certain range, the shear bearing capacity and stiffness of the model will decrease slightly, but the ductility will increase significantly. Compared with the RSFRC shear wall with fiber aspect ratio of 40 and 25, the bearing capacity and ductility of the two are close, but the RSFRC shear wall with low aspect ratio is slightly insufficient. When the axial compression ratio is in the range of 0.2–0.4, the horizontal shear capacity of RSFRC shear wall increases with the increase of vertical load, but the maximum horizontal displacement becomes smaller, and the model is damaged by compression. Using theoretical calculation, this work also creates the simplified calculation method and restoring force model for the bearing capacity of the diagonal section of RSFRC shear wall. The observed findings correspond well with the test hysteresis curve and may serve as a benchmark for future study. This study provides a new research direction for the seismic performance of RSFRC structures, as well as a solid theoretical foundation and promotion for future research.

Influence of Axial Load Ratio on the Seismic Behavior of Steel Fiber–Reinforced Concrete Composite Shear Walls

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Seismic behavior of high strength concrete composite walls with embedded steel truss

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

LATERAL LOADING EXPERIMENT OF SRC LOW SHEAR WALLS WITH HIGH AXIAL FORCE RATIO

Effect of axial compression ratio on concrete-filled steel tube composite shear wall

Study on seismic behavior of SRC shear walls under high axial compression ratio

Seismic behavior research of composite shear wall with concrete filled steel tube columns for different axial-load ratios

Experimental study on seismic behavior of steel tube-reinforced concrete composite shear walls with high axial compressive load ratio

Behavior of Steel Tube-Reinforced Concrete Composite Walls Subjected to High Axial Force and Cyclic Loading

Experimental Study of Shear-Critical Reinforced-Concrete Shear Walls under Tension-Bending Shear-Combined Cyclic Load

Seismic behavior of reinforced concrete shear walls subjected to high axial loading

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Study on seismic performance test and calculation method of recycled steel fiber reinforced concrete shear wall

Study on seismic performance of reinforced concrete shear wall with diagonally distributed reinforcement

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls under Tension-Bending-Shear Combined Cyclic Load

Seismic Performance of SFRC Shear Walls with Window Opening and the Substitution Effect for Steel Bars

Cyclic Loading Experiments on Seismic Performance of Precast Concrete Superposed Shear Walls with CFST End Columns

Shear strength of steel plate reinforced concrete shear wall