Abstract:This paper proposed a new connection mode of prefabricated steel reinforced concrete (SRC) shear wall. The vertical rebars inside the edge concealed columns of the prefabricated SRC shear wall were welded by lap welding, the section steels inside the edge concealed columns of the prefabricated SRC shear wall were welded by ending plates, and the connection of the wall panel in the middle part of the shear wall was realized through the bolt connection between the wall footing unit and the connecting steel plate. Then the concrete was finally poured in the connecting area of the edge concealed column of the shear wall. In order to study the seismic behavior of this new type prefabricated SRC shear walls, the pseudo-static test and nonlinear finite element analysis were carried out. At the same time, parameterized analysis was carried out on the key factors affecting the new type prefabricated SRC shear wall, including axial compression ratio, concrete strength grade, steel ratio of edge concealed columns, reinforcement ratio of vertical rebar section and thickness of connecting steel plate. The research results show that the failure mode of the new type prefabricated SRC shear wall is the same as that of the integrally cast SRC shear wall, and the seismic behavior and bearing capacity are slightly lower, but the difference is very small and in an acceptable range. The increase of axial compression ratio, concrete strength grade and steel ratio of edge concealed column will increase the bearing capacity of the new type prefabricated SRC shear wall, but at the same time, it will reduce the ductility of the new type prefabricated SRC shear wall. The reinforcement ratio of vertical rebar section and the thickness of the connecting steel plate have little effect on the mechanical performance of the new type prefabricated SRC shear wall. Finally, the reasonable value range of the key parameters affecting the mechanical performance of the new type prefabricated SRC shear wall and the calculation method of the shear capacity of the horizontal connection was proposed, which provided a basis for the subsequent design.

LATERAL LOADING EXPERIMENT OF SRC LOW SHEAR WALLS WITH HIGH AXIAL FORCE RATIO

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Study on seismic behavior of SRC shear walls under high axial compression ratio

Seismic behavior of reinforced concrete shear walls subjected to high axial loading

Seismic Behavior and Modeling of Steel Reinforced Concrete (SRC) Walls

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Experimental study on seismic behavior of steel tube-reinforced concrete composite shear walls with high axial compressive load ratio

Experimental Study of Shear-Critical Reinforced-Concrete Shear Walls under Tension-Bending Shear-Combined Cyclic Load

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Experimental Research On Rc Shear Wall Structures Framed With Concrete-Filled Steel Tubular Columns

Experimental Study on Seismic Behavior of Medium and High Shear-Span Ratio Composite Shear Wall with Double Steel Plates and Infill Concrete under High Axial Compression Ratio

Influence of Axial Load Ratio on the Seismic Behavior of Steel Fiber–Reinforced Concrete Composite Shear Walls

Experimental study on the seismic behavior of high-performance cold-formed steel plate shear walls

Performance of Reinforced Concrete Shear Walls with Steel Reinforced Concrete Boundary Columns

Experimental Study on Failure Mechanism of Rc Walls with Different Boundary Elements under Vertical and Lateral Loads

Experimental Research on Seismic Behavior of Low Shear-Span Ratio Composite Shear Wall with Double Steel Plates and Infill Concrete

EXPERIMENTAL STUDY ON SHEAR BEHAVIORS OF COLD-FORMED THIN-WALLED STEEL REINFORCED CONCRETE SHEAR WALLS WITH DIFFERENT DETAILS

Seismic behavior of prefabricated steel reinforced concrete shear walls with new type connection mode

Experimental and numerical investigation on the seismic behaviors of RC shear walls with multiple post-openings before and after strengthening by steel plates

Experimental study on seismic behaviors of the welded L-shaped double steel plate-concrete composite shear wall