Abstract:This paper presents the influence of Aluminum Nitride (AlN) nanoparticles on the electrical and material properties of epoxy resin (EP). The EP/AlN nanocomposites with different concentrations of nano-AlN fillers are prepared. The dispersion of the nano-AlN particles in the composites is analyzed by a field emission scanning electron microscope (FESEM). The electrical properties are investigated by the space charge and DC conductivity measurements, whereas the material properties are studied by Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The results show that the homo-charge accumulation appears near both electrodes during the polarization, but there are limited negative charges left near both electrodes in the depolarization for the pure EP sample. There is no space charge accumulation in the 1 wt% and 2 wt% EP/AlN nanocomposites. The electric field distortion of the pure EP sample is 20%. Moreover, the electric field distortion initially decreases with the increase of the nano-AlN content, but it increases for the 2 wt% nano-AlN sample. Temperature has a dominant influence on the DC conductivity of the EP/AlN nanocomposites comparing to the pure EP. However, the DC conductivity of the nanocomposites becomes stable at high temperatures. It is also found that the weight loss of the samples decreases with the addition of the nano-AlN and the 1 wt% nano-AlN sample has the highest glass transition temperature. It is elucidated that the high apparent mobility and activation energy facilitate the space charge transport and suppressing the space charge accumulation. Furthermore, the nano-AlN filler can increase the trap level and trap energy density of the deep traps in the sample. The dielectric loss of the EP at high frequency is reduced with the content of 1 wt% nano-AlN. Furthermore, the addition of the nano-AlN can improve the thermal stability of the EP. The 1 wt% nano-AlN sample has the superior electrical insulation and material performance amongst the tested materials.

Researches on Silane Coupling Agent Treated AlN Ceramic Powder and Fabrication of AlN/PTFE Composites for Microwave Substrate Applications

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Enhanced Thermal and Dielectric Performance of Epoxy Resin/aluminum Nitride Nanocomposites at High Temperatures

Dielectric and thermal properties of GFs/PTFE composites with hybrid fillers of Al2O3 and hBN for microwave substrate applications

Surface-modified Li3Mg2NbO6 ceramic particles and hexagonal boron nitride sheets filled PTFE composites with high through-plane thermal conductivity and extremely low dielectric loss

Surface-modified Zn0.5Ti0.5NbO4 particles filled polytetrafluoroethylene composite with extremely low dielectric loss and stable temperature dependence

Functionalized Al2O3 fillers/glass fibers cloth/PTFE composites with excellent thermal properties

Electromagnetic and Microwave Absorption Properties of Surface Modified Fe–Si–Al Flakes with Nylon

Optimizing Hydrolysis Resistance and Dispersion Characteristics via Surface Modification of Aluminum Nitride Powder Coated with PVP-b-P(St-alt-ITA) Copolymer

Non hydrolizable aluminum nitride powders surface modified by silicic acids

Dense AlN/FeSiAl composite ceramics with high thermal conductivity and strong microwave absorption

Microwave absorbing capability of nanocrystalline flakes

Effect of surface modification of aluminum nitride on electrical and thermal characterizations of thermosetting polymeric nanocomposites

The Use of Polyimide-Modified Aluminum Nitride Fillers in AlN@PI/Epoxy Composites with Enhanced Thermal Conductivity for Electronic Encapsulation

Investigation of PTFE-based ultra-low dielectric constant composite substrates with hollow silica ceramics

Optimizing AlN hydrolysis process to fabricate coated modified powders for improving the properties of Si 3 N 4 /SiAlON ceramics prepared by Vat Photopolymerization

High-Thermal-Conductivity AlN Ceramics Prepared from Octyltrichlorosilane-Modified AlN Powder

Additive manufacturing of complex-shaped and high-performance aluminum nitride-based components for thermal management

Study on Microwave Attenuation Characteristics of AlN-C Composites

Design and fabrication of Al 2 O 3 f /SiCN composite with excellent microwave absorbing and mechanical properties