Abstract:Aiming at developing carbon fibre/polyamide-12 (CF/PA) composite powders for manufacturing high-performance components by selective laser sintering (SLS), the preparation, characteristics and sintering process of the composite powders and mechanical properties of sintered components were studied. Surfaces of the carbon fibres were treated by the oxidation modification and coated with polyamide-12 through the dissolution-precipitation process to provide good interfacial adhesion and homogenous dispersion within the polyamide-12 matrix. The particle size and micro-morphology analyses show that the CF/PA composite powders with 30 wt%, 40 wt% and 50 wt% carbon fibres present the suitable powder sizes and format for SLS. The incorporation of carbon fibres into the polyamide-12 matrix decreases the initial melting temperature and consequently lowers the SLS part bed temperatures, implying lower energy requirement and less thermal degradation in the sintering process. The CF/PA composites also represent higher thermal stability than the pure polyamide-12. The CF/PA sintered components with 30 wt%, 40 wt% and 50 wt% carbon fibres exhibit the greatly enhanced flexural strengths by 44.5%, 83.3%, 114%, and the flexural modulus by 93.4%, 129.4%, 243.4%, respectively, as compared with the pure polyamide-12 sintered parts. Fractured surface analysis shows that the carbon fibres are encapsulated and bonded well with the polyamide matrix. The complex SLS parts with the thinnest wall of 0.6 mm, the density of 1.09 +/- 0.02 g/cm(3) and the relatively density of 94.13 +/- 1.72% were manufactured using the CF/PA composite powder with 30 wt% carbon fibres. This study demonstrates that the CF/PA composite powders prepared by the surface treatment and dissolution-precipitation method represent suitable interfacial adhesion, filler dispersion, particle sizes and sintering behaviours for SLS and enable the manufacture of complex components with high performance. (C) 2011 Elsevier Ltd. All rights reserved.

The Process and Performance Comparison of Polyamide 12 Manufactured by Multi Jet Fusion and Selective Laser Sintering

Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion

Selective Laser Sintering vs Multi Jet Fusion: a comprehensive comparison study based on the properties of glass beads reinforced PA12

Study in performance and morphology of polyamide 12 produced by selective laser sintering technology

Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12

A Comprehensive Investigation on 3D Printing of Polyamide 11 and Thermoplastic Polyurethane via Multi Jet Fusion

Effect of Polyamide-12 Material Compositions on Mechanical Properties and Surface Morphology of SLS 3D Printed Part

Selective Laser Sintering of Polystyrene/Nylon-12 Alloy

Additive Manufacturing of Polyamide 66: Effect of Process Parameters on Crystallinity and Mechanical Properties

Effects of build positions on the thermal history, crystallization, and mechanical properties of polyamide 12 parts printed by Multi Jet Fusion

Microstructure of Selective Laser Sintered Polyamide

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Comparative Analysis of Mechanical and Thermal Characteristics of 3D‐Printed Polyamide using Material Extrusion and Powder Bed Fusion Process with Industrial and Desktop Printers

Experimental Characterisation and Finite Element Modelling of Polyamide-12 Fabricated via Multi Jet Fusion

Comparisons of Indirect Selective Laser Sintering with Selective Laser Melting

On the Difference in Mechanical Behavior of Glass Bead-Filled Polyamide 12 Specimens Produced by Laser Sintering and Injection Molding

Preparation, Characterisation and Processing of Carbon Fibre/polyamide-12 Composites for Selective Laser Sintering

Experimental investigating and numerical simulations of the thermal behavior and process optimization for selective laser sintering of PA6

Fabrication Process and Properties of Porous Polyamide Produced by Selective Laser Sintering

The differences of the selective laser sintering between crystalline and amorphous polymer

Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders