Abstract:Purpose This study aims to comprehensively investigate the mixed-mode fracture behavior and mechanical properties of selective laser sintering (SLS) polyamide 12 (PA12) components, considering different build orientations and layer thicknesses. The primary objectives include the following. Conducting mixed-mode fracture and mechanical analyses on SLS PA12 parts. Investigating the influence of build orientation and layer thickness on the mechanical properties of SLS-printed components. Examining the fracture mechanisms of SLS-produced Arcan fracture and tensile specimens through experimental methods and finite element analyses. Design/methodology/approach The research used a combination of experimental techniques and numerical analyses. Tensile and Arcan fracture specimens were fabricated using the SLS process with varying build orientations (X, X–Y, Z) and layer thicknesses (0.1 mm, 0.2 mm). Mechanical properties, including tensile strength, modulus of elasticity and critical stress intensity factor, were quantified through experimental testing. Mixed-mode fracture tests were conducted using a specialized fixture, and finite element analyses using the J-integral method were performed to calculate fracture toughness. Scanning electron microscopy (SEM) was used for detailed morphological analysis of fractured surfaces. Findings The investigation revealed that the highest tensile properties were achieved in samples fabricated horizontally in the X orientation with a layer thickness of 0.1 mm. Additionally, parts manufactured with a layer thickness of 0.2 mm exhibited favorable mixed-mode fracture behavior. The results emphasize the significance of build orientation and layer thickness in influencing mechanical properties and fracture behavior. SEM analysis provided valuable insights into the failure mechanisms of SLS-produced PA12 components. Originality/value This study contributes to the field of additive manufacturing by providing a comprehensive analysis of the mixed-mode fracture behavior and mechanical properties of SLS-produced PA12 components. The investigation offers novel insights into the influence of build orientation and layer thickness on the performance of such components. The combination of experimental testing, numerical analyses and SEM morphological observations enhances the understanding of fracture behavior in additive manufacturing processes. The findings contribute to optimizing the design and manufacturing of high-quality PA12 components using SLS technology.

Selective Laser Sintering of Polystyrene/Nylon-12 Alloy

Development of a Polymer Alloy of Polystyrene (PS) and Polyamide (PA) for Building Functional Part Based on Selective Laser Sintering (SLS)

Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders

Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12

Improvement on Selective Laser Sintering and Post-Processing of Polystyrene

Selective Laser Sintering of Aluminum/nylon 12 Composite Powder

Study in performance and morphology of polyamide 12 produced by selective laser sintering technology

Microstructure of Selective Laser Sintered Polyamide

The Process and Performance Comparison of Polyamide 12 Manufactured by Multi Jet Fusion and Selective Laser Sintering

The differences of the selective laser sintering between crystalline and amorphous polymer

Properties of the Selective Laser Sintered Specimens of Nylon12-Coated Aluminum Powders

Accuracy and Mechanical Property Analysis of Lpa12 Parts Fabricated by Laser Sintering

Preparation, Characterisation and Processing of Carbon Fibre/polyamide-12 Composites for Selective Laser Sintering

Exploring mixed-mode fracture behavior and mechanical properties of selective laser sintered polyamide 12 components

Optimization of Selective Laser Sintering Process Parameters Based on PA12 Powders for Bone Tissue Scaffolds

Process Study of Selective Laser Sintering of PS/GF/HGM Composites

Preparation of Nylon 12 Coated Copper Powders for Selective Laser Sintering

Erratum To: Investigation into the Selective Laser Sintering of Styrene-Acrylonitrile Copolymer and Postprocessing

Characterisation Of Carbon Fibre Reinforced Nylon-12 Composites For Selective Laser Sintering Process

Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering

Fabrication Process and Properties of Porous Polyamide Produced by Selective Laser Sintering