Abstract:Due to its high versatility and cost-effectiveness, solution process has a remarkable advantage over physical or chemical vapor deposition (PVD/CVD) methods in developing flexible resistive random-access memory (RRAM) devices. However, the reported solution-processed binary oxides, the most promising active layer materials for their compatibility with silicon-based semiconductor technology, commonly require high-temperature annealing (>145 °C) and the RRAMs based on them encounter insufficient flexibility. In this work, an amorphous and uniform SiOx active layer was prepared by irradiating an inorganic polymer, perhydropolysilazane, with a vacuum ultraviolet of 172 nm at room temperature. The corresponding RRAM showed typical bipolar resistance switching with a forming-free behavior. The device on polyimide film exhibited outstanding flexibility with a minimum bending radius of 0.5 mm, and no performance degradation was observed after bending 2000 times with a radius of 2.3 mm, which is the best among the reported solution-processed binary oxide-based RRAMs and can even rival the performance of PVD/CVD-based devices. This room-temperature solution process and the afforded highly flexible RRAMs have vast prospects for application in smart wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16556?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16556</a>.XRD patterns of the Au substrate and VUV-irradiation SiOx films on Au substrate (Figure S1); the SEM image of the SiOx layer on Au/glass substrate (Figure S2); the electroforming-free performance of the prepared device (Figure S3); I–V curves in a semilogarithmic plot of the Ag/SiOx/Au/glass device in vacuum environment (7.4 × 10–3 Pa) (Figure S4); the wide-scan XPS spectra of the SiOx fabricated with different heating temperatures and VUV-irradiation processes (Figure S5); the I–V curve for the 8 nm device after a few cycles and the 50 nm device (Figure S6); the relationship between the coefficient of variation (σ/μ) and size (Figure S7); the I–V curve of the HRS fitting with SCLC, P-F emission, and thermionic emission mechanism; the I–V curves of the HRS fitting with the Schottky emission mechanism at different temperatures from 303 to 343 K (Figure S8); the I–V measurement result during 349 cycles corresponding to <a class="internalNav" href="#fig3">Figure </a><a class="internalNav" href="#fig3">3</a>c drawn in a diagram (Figure S9); the I–V measurement result for Ti/SiOx/Au/glass during 108 cycles (Figure S10); the resistance of HRS and LRS as a function of the bending strain in outward direction (Figure S11); the change of the resistance with bending numbers in outward direction with a radius of 0.5 mm (Figure S12); the nano-indentation test (by Agilent Nano Indenter G200) for the SiOx layer (Figure S13); the device-to-device data corresponding to <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a,c,d, respectively (Figure S14); the pictures of the hand-made hinge structure (Figure S15); and the details of the bending experiments (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16556/suppl_file/am0c16556_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Design of Wafer-Scale Uniform Au Nanotip Array by Ion Irradiation for Enhanced Single Conductive Filament Resistive Switching

Highly Scalable Resistive Switching Memory in Metal Nanowire Crossbar Arrays Fabricated by Electron Beam Lithography

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Interface Engineering With Mos2-Pd Nanoparticles Hybrid Structure For A Low Voltage Resistive Switching Memory

CMOS-compatible wafer-scale Si subulate array for superb switching uniformity of RRAM with localized nanofilaments

Ultralow Set Voltage and Enhanced Switching Reliability for Resistive Random-Access Memory Enabled by an Electrodeposited Nanocone Array.

Low-cost Fabrication and Polar-Dependent Switching Uniformity of Memory Devices Using Alumina Interfacial Layer and Ag Nanoparticle Monolayer

Modulating Metallic Conductive Filaments Via Bilayer Oxides in Resistive Switching Memory

HfO2-Based RRAM with in Situ Conductive Channels Induced by Nanoparticles to Improve Stability

Controllable Growth of Nanoscale Conductive Filaments in Solid-Electrolyte-based ReRAM by Using a Metal Nanocrystal Covered Bottom Electrode.

Controllable Formation of Resistive Switching Filaments by Low-Energy H+ Irradiation in Transition-Metal Oxides

Highly flexible resistive switching memory based on amorphous-nanocrystalline hafnium oxide films.

Smart Design of Resistive Switching Memory by an In Situ Current‐Induced Oxidization Process on a Single Crystalline Metallic Nanowire

A novel high-performance and energy-efficient RRAM device with multi-functional conducting nanofilaments

Resistance switching devices based on amorphous insulator-metal thin films

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

Room-Temperature, Solution-Processed SiO x via Photochemistry Approach for Highly Flexible Resistive Switching Memory

Insight into interface behavior and microscopic switching mechanism for flexible HfO2 RRAM

Improving Unipolar Resistive Switching Uniformity with Cone-Shaped Conducting Filaments and Its Logic-In-Memory Application

Flexible transparent memory cell: bipolar resistive switching via indium-tin oxide nanowire networks on a poly(dimethylsiloxane) substrate

Multilevel Resistive Switching Dynamics by Controlling Phase and Self‐Assembled Nanochannels in HfO2