Abstract:The present work investigated the influences of the variation of Si content and the minor amount of Zr addition on the microstructure, oxidation resistance and mechanical property at 1523 K of Nb-Si-Ti/Zr/Hf-Cr/Al high-entropy superalloys systematically. Alloy compositions with Nb-21.6(Ti/Zr)-3.1Hf-(9.4–15.6)Si-6.3Cr-3.1Al-1.0B (at. %) were designed using a cluster formula approach to realize the substitution of similar elements, in which these alloys were solid-solutionized at 1573 K for 24 h and then aged at 1273 K for 24 h. It was found that all these aged alloys are mainly composed of BCC-Nb solid solution (Nbss), Nb 5 Si 3 and Cr 2 Nb phases, where the increase of Si content and the addition of Zr could significantly increase the volume fraction of Nb 5 Si 3 in a form of coarse and primary particles. Consequently, high-Si alloys possess outstanding mechanical property at high temperature, as evidenced by the fact that the yield strength ( σ YS = 373 MPa) at 1523 K of high-Si/Zr alloy containing 15.6 at. % Si and 1.6 at. % Zr is much higher than that ( σ YS = 266 MPa) of the low-Si alloy with 9.4 at. % Si and 0 Zr. It is mainly ascribed to the existence of primary Nb 5 Si 3 particles, besides the eutectic microstructure composed of Nbss and Nb 5 Si 3 , as well as fine Cr 2 Nb precipitates in Nbss. Moreover, a minor amount of Zr substitution for the Ti is conducive to the phase transition of α-Nb 5 Si 3 to γ-Nb 5 Si 3 . Thus, this high-Si/Zr alloy exhibits an improved oxidation resistance after 50 h-exposure at 1523 K, due to the lowest mass gain of about 80.9 mg/cm 2 . The constitutions of oxide scales in these alloys were characterized and compared, from which it was found that the better oxidation resistance is closely related to the formation of dense oxide scales. This work will provide a new approach to obtain an optimum combination of mechanical property and oxidation resistance of superalloys through multi-component alloying.

Improvement in the oxidation resistance of Nb-Si-Ti based alloys containing zirconium

Oxidation behavior of Nb-16Si-20Ti-3Al containing nano-ZrC fabricated by laser melting deposition

Improving oxidation resistance of TaMoZrTiAl refractory high entropy alloys via Nb and Si alloying

Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000 °C

Effects of Si variation and Zr addition on the microstructure, oxidation resistance and mechanical property at 1523 K of Nb-Si-Ti/Zr/Hf-Cr/Al high-entropy superalloys

Effect of Zirconium Content on the Microstructure and Corrosion Behavior of As-Cast Ti-Al-Nb-Zr-Mo Alloy

The Mechanical Properties and High-Temperature Oxidation Behavior of (Tizr)65-X-ynb15mo20sixaly Refractory High Entropy Alloys

Microstructures and Mechanical Properties of Cast Nb-Ti-Si-Zr Alloys

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

Nano-Ti5Si3 Leading to Enhancement of Oxidation Resistance

The Mechanical Properties and High-Temperature Oxidation Behavior of (Tizr)65-X-ynb15mo20sixaly 65-X-y Nb 15 Mo 20 Si X Al Y Refractory High Entropy Alloys

An approach to improve the oxidation resistance of a Ni-28W-6Cr alloy by hindering the oxygen vacancy-mediated oxidation

The Microstructural Characteristics and Mechanical Properties of Nb-16Si-22Ti-2Al-2Cr Alloys with Zr Addition

Effect of zirconium content on the microstructure, physical properties and corrosion behavior of Ti alloys

Oxidation behaviour and microstructure evolution of Zr-containing steel under continuous high-temperature exposure

Microstructure and Mechanical Properties of Ti43Al6Nb Alloys with Different Zirconium Contents

Effect of boronizing treatment on the oxidation resistance of Zr2(AlSi)4C5/SiC composite

Effect of Variation in Zr Content on Microstructure and High-Temperature Tensile Properties of a Γ-Tial Alloy

Improving the Mechanical Properties of Nb-24Ti-16Si-2Al Alloy by Adding Zr and Fe to Regulate Silicide

Synergistic Effect of Zr and Ti on Microstructure and Properties for Nb Si Based In-Situ Composites

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy