Abstract:Purpose The purpose of this study is to evaluate and minimize the losses of alternating current (AC) in the winding of electrical machines. AC winding losses are frequently disregarded at low frequencies, but they become a significant concern at high frequencies. This is the situation where applications require a high speed. The most significant applications in this category are electrical propulsion and drive systems. Design/methodology/approach An analytical model is used to predict the AC losses in the winding of electrical machines. The process involves dividing the slot into separate layers and then calculating the AC loss factor for each layer. The model aims to calculate AC losses for two different winding arrangements involving circular conductors. This application focuses on the stator winding of a permanent magnet synchronous motor that is specifically designed for electric vehicles. The model is integrated into an optimization process that makes use of the genetic algorithm method to minimize AC losses resulting from the arrangement of conductors within the slot. Findings This study and its findings demonstrate that the arrangement of the conductors within the slot has a comparable effect on the AC losses in the winding as the machine's geometric and physical properties. The effectiveness of electrical machines depends heavily on optimizing the arrangement of conductors in the slot to minimize AC winding losses. Originality/value The proposed strategy seeks to minimize AC winding losses in high-speed electric machines by providing a cost-effective and precise solution to improve energy efficiency.

Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Influence of End-Winding on Optimal Design Parameters for Maximum Torque of DC Excited Flux-Switching Machines

Optimal Designs of Wound Field Switched Flux Machines with Different DC Windings Configurations

Analysis and Reduction of Inherent Shaft Voltage in Interior Permanent Magnet Synchronous Machines

Optimization of conductors arrangement in slot for alternating current winding losses reduction

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

AC Loss Analytic Method and Optimization of Litz Winding for High-Speed Electrical Machines

Comprehensive Analysis of the AC Copper Loss for High Speed PM Machine With Form-Wound Windings

An Investigation on AC Loss Reduction for Permanent-Magnet Superconducting Electrical Machine

Electrical Machines Winding Technology: Latest Advancements for Transportation Electrification

Influence of Coil Position on AC Losses of Stator Superconducting Windings of a Synchronous Machine for a 10 MW Wind Turbine

Influence of Slot Flux Leakage on the Current Distribution in Axial Flux Machine Windings

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Reduction of Copper Loss of Planar Transformers Based on Optimized Width Winding

Study on AC Copper Losses in an Air-Cored Axial Flux Permanent Magnet Electrical Machine with Flat Wires

Design of a Printed Circuit Board Axial Flux Permanent Magnet Machine for High Speed Applications

Study on Electromagnetic Losses in High-speed Permanent Magnet Brushless Machines-the State of the Art

A Computationally Efficient Semi-Analytical Method for Circulating Current Loss of High Speed Permanent Magnet Machines

Accurate Equivalent Modeling and Thermal Analtsis of Stator Slot of Flat Wire Motor