Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Extending Velocity Sensor Bandwidth by Compensating Temperature Dependency Based on BP Neural Network

Temperature Compensation of Elasto-Magneto-Electric (EME) Sensors in Cable Force Monitoring Using BP Neural Network

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

A Dynamic Voltage Compensation Method for Improving Weighing Accuracy

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Research of neural network-based model for nonlinear temperature drift compensation of MEMS accelerometers

Miniaturization of inertial magnetoelectric vibration velocity sensor with high frequency response at low frequency band

The Temperature Error Modeling and Compensation Method of Fiber Optic Gyroscope Scaling Factor

Temperature compensation of optical alternating magnetic field sensor via a novel method for on-line measuring

Nonlinearity Compensation of Magneto-Optic Fiber Current Sensors Based on WOA-BP Neural Network

Temperature Compensation Method of Fluxgate Sensor Based on Polynomial Fitting

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Dynamic compensation method based on system identification and error-overrun mode correction for strain force sensor

Temperature Compensation of MEMS Resonant Accelerometers with an On-Chip Platinum Film Thermometer

Accurate Nonlinearity and Temperature Compensation Method for Piezoresistive Pressure Sensors Based on Data Generation.

Resonance-State Temperature Compensation Method for Ultrasonic Resonance Wind Speed and Direction Sensors

Temperature compensation model for non-dispersive infrared CO2 gas sensor based on WOA-BP algorithm

A Wide-Band Magnetoelectric Sensor Based on a Negative-Feedback Compensated Readout Circuit

Compensation Techniques for Photosensors Used in High-Precision Accelerometers