Abstract:Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1-C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1-C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

A new strategy for CO2 utilization with waste plastics: conversion of hydrogen carbonate into formate by polyvinyl chloride in water

Polyvinyl chloride (PVC) derived microporous carbons prepared via hydrothermal dechlorination and potassium hydroxide activation for efficient CO 2 capture

Converting Polyvinyl Chloride Plastic Wastes to Carbonaceous Materials via Room-Temperature Dehalogenation for High-Performance Supercapacitor

Hydrothermal carbonisation of polyvinyl chloride in ethanol-water/water system for solid fuels: Dechlorination, characteristics analysis of hydrochar, and reaction path

Sequential hydrothermal dechlorination and liquefaction of PVC

One-Pot Conversion of Polyester and Carbonate into Formate without External H2

Low-temperature dechlorination of polyvinyl chloride (PVC) for production of H 2 and carbon materials using liquid metal catalysts

Hydrothermal dechlorination strategy for high-quality oil recovery from polyvinyl chloride

Mechanochemical Treatment of Waste Poly (Vinyl Chloride) for Alcohol Halogenation by Ball Milling and Triboelectric Material

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Catalytic conversion of waste plastics: focus on waste PVC

Using waste poly(vinyl chloride) to synthesize chloroarenes by plasticizer-mediated electro(de)chlorination

Catalytic tandem dehydrochlorination–hydrogenation of PVC towards valorisation of chlorinated plastic waste

From polyvinyl chloride waste to activated carbons: the role of occurring additives on porosity development and gas adsorption properties

Characterization of solid and liquid carbonization products of polyvinyl chloride (PVC) and investigation of the PVC-derived adsorbent for the removal of organic compounds from water

Dechlorination and fuel gas generation in chemical looping conversion of waste PVC over inherently Na/Ca/K-containing bauxite residue-based oxygen carriers

Hydrothermal treatment of polyvinyl chloride: Reactors, dechlorination chemistry, application, and challenges

Upgrading Waste Polylactide via Catalyst‐Controlled Tandem Hydrolysis‐Oxidation

High-purity H2 Production from Mixed PVC/PET Plastic Wastes Through Tandem Hydrothermal Depolymerization and Aqueous Phase Reforming

Recycling PVC Waste into CO2 Adsorbents: Optimizing Pyrolysis Valorization with Neuro-Fuzzy Models

Chemical recycling technologies for PVC waste and PVC-containing plastic waste: A review