Abstract:This paper presents a novel sol-gel method to synthesize large and thick silica aerogel monoliths at near ambient conditions using a commercial aqueous solution of colloidal silica nanoparticles as building blocks. To achieve slabs with high visible transmittance and low thermal conductivity, the method combines the strategies of (i) synthesizing gels on an omniphobic perfluorocarbon liquid substrate, (ii) aging at temperatures above room temperature, and (iii) performing solvent exchange with a low-surface-tension organic solvent prior to ambient drying. The omniphobic liquid substrates were used to prevent cracking and ensure an optically-smooth surface, while nanoparticle building blocks were small (<10 nm) to limit volumetric light scattering. Gels were aged at temperatures between 25 and 80 °C for up to 21 days to make them stronger and stiffer and to reduce shrinkage and cracking during ambient drying. Ambient drying was achieved by first exchanging water in the gel pores for octane, followed by drying in an octane-rich atmosphere to decrease capillary forces. The synthesized nanoparticle-based silica aerogel monoliths had thicknesses up to 5 mm, diameters up to 10 cm, porosities exceeding 80%, and thermal conductivities as low as 0.08 W m-1 K-1. Notably, the slabs featured visible transmittance exceeding 75% even for slabs as thick as 5 mm. The as-synthesized aerogel monoliths were exposed to TMCS vapor to induce hydrophobic properties resulting in a water contact angle of 140° that prevented water infiltration into the pores and protected the aerogels from water damage. This simple synthesis route conducted at near ambient conditions produces hydrophobic aerogel monoliths with promising optically transparent and thermally insulating properties that can be adhered to glass panes for window insulation and solar-thermal energy conversion applications.

Facile Fabrication of Hydrophobic Polyvinylpolysilsesquioxane Aerogels with Improved Optical Properties

Ease-of-manufacture highly transparent thin polyvinyl alcohol aerogel

Transparent, Elastic and Crack-Free Polymethylsilsesquioxane Aerogels Prepared by Controllable Shrinkage of the Hydrogels in the Aging Process

A Co-Precursor Approach Coupled with a Supercritical Modification Method for Constructing Highly Transparent and Superhydrophobic Polymethylsilsesquioxane Aerogels

Versatile Double-Cross-Linking Approach to Transparent, Machinable, Supercompressible, Highly Bendable Aerogel Thermal Superinsulators

Transparent silica aerogel slabs synthesized from nanoparticle colloidal suspensions at near ambient conditions on omniphobic liquid substrates

Transparent, Superflexible Doubly Cross-Linked Polyvinylpolymethylsiloxane Aerogel Superinsulators Via Ambient Pressure Drying.

Fabrication and property of hydrophobic polyvinyl alcohol /clay aerogel via irradiation-crosslinking and ambient-drying

Ultralight and Flexible Monolithic Polymer Aerogel with Extraordinary Thermal Insulation by A Facile Ambient Process

Hydrophobic Silica Aerogels Derived from Polyethoxydisiloxane and Perfluoroalkylsilane

Preparation and properties of hydrophobic and highly transparent SiO 2 aerogels

Green Preparation of Thermal-Insulative, Flame Retardant, and Hydrophobic Silica Aerogel Reinforced Poly(vinyl alcohol) Composites

Ultraviolet-assisted Direct-Write Printing Strategy Towards Polyorganosiloxane-Based Aerogels with Freeform Geometry and Outstanding Thermal Insulation Performance

Transparent, robust, and machinable hybrid silica aerogel with a “rigid-flexible” combined structure for thermal insulation, oil/water separation, and self-cleaning

Polybenzoxazine aerogels fabricated by an aqueous solvent sol-gel method for thermal insulation

Toward Improved Optical Transparency of Silica Nanofibrous Aerogels

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

Thermal insulating, flame retardant, and superhydrophobic polybenzoxazine/silica aerogels fabricated in water-ethanol solvent using eco-friendly method

Development of hydrophobic and optically transparent monolithic silica aerogels for window panel applications

Emulsion-templated, hydrophilic and underwater oleophobic PVA aerogels with enhanced mechanical property

Silane modified MXene/polybenzazole nanocomposite aerogels with exceptional surface hydrophobicity, flame retardance and thermal insulation