Abstract:In this study, the effect of the mechanical stability of residual austenite in a carburizing layer on the wear performance was explored. First, different amounts of residual austenite were obtained by quenching and cooling 23CrNi3MoA steel after carburization. The effects of the volume fraction, size, and distribution of the residual austenite on the stability and wear performance were investigated. Second, scanning electron microscopy (SEM), transmission electron microscopy (TEM), focused ion beam (FIB), and electron backscatter diffraction (EBSD) analyses were used to characterize the severely deformed layer under friction. In addition, the impacts of the size, morphology, content, and distribution of residual austenite on the wear performance were analyzed. The final results indicated that as the k of the residual austenite decreased, the wear performance of the sample first increased and then decreased. The wear performance improved due to the reduced stability of the residual austenite, which facilitated phase transformation of the residual austenite under friction. The phase transformation of residual austenite into martensite increased the hardness of the wear surface layer. In addition, nanotwinned martensite formed in the severe wear deformation layer. The generation of nanotwins could effectively hinder dislocation movement and store high-density dislocations near the twin boundaries, thereby improving the strength of the wear layer and reducing the wear rate. However, when the residual austenite stability continued to decrease, a large amount of block-like austenite at the grain boundaries underwent excessive plastic deformation during friction. This excessive plastic deformation increased the number of dislocations and led to incoordination between the phase-transformed martensite and the original martensite during deformation. Therefore, crack nucleation increased, and crack propagation accelerated, directly increasing the amount of wear on the wear surface and decreasing the overall wear resistance of the material. In this article, the wear mechanism of residual austenite during dry sliding friction was elucidated, and a basis for reasonable control of residual austenite in production work was provided.

An Integrated Model of Impact-Abrasive Wear in Bainitic Steels Containing Retained Austenite

The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels

Effects of TiC and residual austenite synergistic strengthening mechanism on impact-abrasive wear behavior of bainite steel

Enhanced Wear Resistance of Nanotwinned Austenite in Higher Si Nanostructured Bainitic Steel

The effect of hydrogen on the impact-abrasion wear behavior in nanostructured bainitic steels

Comparison of wear performance of bainitic and martensitic structure with similar fracture toughness and hardness at different wear conditions

Analyzing the effect of the mechanical stability of residual austenite on the wear performance

Effect of Microstructure Transformation below MS Temperature in Bainitic Steels on the Impact-Abrasive Wear Behavior

Effect of Retained Austenite on Impact Toughness and Fracture Behavior of Medium Carbon Submicron-Structured Bainitic Steel

High stress impact wear resistance of high silicon bainitic steel

Hardening mechanism of high manganese steel during impact abrasive wear

A study of the abrasive wear of carbon steels

Microstructure Transformation in the Worn Surface Layer of Austenite-Bainite Steel with Nodular Eutectics during Impact Wear

Study on Carbide-Bearing and Carbide-Free Bainitic Steels and Their Wear Resistance

Wear behavior and damage characterization for AISI 52100 bearing steels: Effect of hardness and spherical carbides

Effect of Si on Wear Resistance of Bainitic Cast Steel under High Stress Impact

Comparative Study on Microstructures and Properties of Mn-containing and Mn-free Bainitic Steels

Capability of Nodular Eutectic and Austenite–bainite Polyphase Structure to Resist Impact Abrasive Wear

Wear behavior of austenite-bainite steel with nodular eutectics in impact abrasion

Wear Property and Wear Mechanisms of High-Manganese Austenitic Hadfield Steel in Dry Reciprocal Sliding

Wear behavior of bainite ductile cast iron under impact load