Abstract:The granular motion of binary-size mixture in a three-dimensional rotating drum operating in the rolling regime is numerically tracked via the discrete element method (DEM), with a focus on the axial dispersion behavior of the different particle types in response to the inherent size-segregation. Accordingly, the evolution with time, the frequency distribution and the space-time profiles of the axial dispersion coefficients are evaluated. The results demonstrate that (i) the fast radial segregation gives rise to the sharp increase and decrease of the axial dispersion coefficients of respectively the large and small particles in both the active and passive regions; (ii) the axial dispersion coefficients in the active region is an order-of-magnitude higher than that in the passive region; (iii) after the radial segregation, the frequency distributions of the axial dispersion coefficients of the large particles, the small particles and all the particles are normal distributions; (iv) the greatest axial dispersion coefficients of both particle types are at the upper part of the active region near the bed surface; (v) increasing the rotating speed and particle diameter ratio clearly enhances the axial dispersion intenstity in the active and passive regions; and (vi) axial segregation results in the greatest axial dispersion near the end walls, while most of the rest of the drum exhibit equally low axial dispersion. The results obtained here contribute towards understanding the dynamical response of the axial dispersion of different particle types to the inevitable radial and axial segregation phenomena, and are expected to be valuable for improving operations and advancing theoretical models of such granular systems with constituents of different sizes.

Numerical investigation of mixing and heat transfer of granular material in a ribbon reactor: effect of impeller speed and filling rate

Numerical Investigation on Hydrodynamics and Heat Transfer of Highly Viscous Fluid in Sulzer Mixer Reactor

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Numerical Study of Mixing and Thermal Conduction of Granular Particles in Rotating Tumblers

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Numerical investigation on the intensification of coaxial slurry mixing systems

Micromixing Simulation of Novel Large-Double-Blade Impeller

Numerical Study on Particle Mixing in a Double-Screw Conical Mixer

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Investigation of mixing homogeneity of binary particle systems in high-shear wet granulator by DEM

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Three-dimensional axial dispersion dynamics of granular flow in the rolling-regime rotating drum

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Experimental investigation of heat generation during the mixing of granular materials using an overhead stirrer

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Numerical Simulation of Particle Mixing Behavior in High Speed Shear Mixer and Cylinder Mixer

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Three-dimensional numerical study of flow characteristic and membrane fouling evolution in an enzymatic membrane reactor

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller