Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

PPY: PVA Blend Enhanced with Metal Salt for Gas Sensing Applications

Polymer Film Coated Micro/Nanofiber for Gas Sensing

O2 plasma-functionalized SWCNTs and PEDOT/PSS composite film assembled by dielectrophoresis for ultrasensitive trimethylamine gas sensor.

Fabrication and Ammonia Gas Sensing of Palladium/polypyrrole Nanocomposite

Catalyzing Sensitivity: Exploring CuO's Influence on PVA/PPy Films to Enhance its Performance for NO2 Gas Detection

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Gas sensing behavior of polyvinylpyrrolidone-modified ZnO nanoparticles for trimethylamine

A composite of quaternized and crosslinked poly(4-vinylpyridine) with processable polypyrrole for the construction of humidity sensors with improved sensing properties

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Fabrication of Reproducible and Selective Ammonia Vapor Sensor-Pellet of Polypyrrole/Cerium Oxide Nanocomposite for Prompt Detection at Room Temperature

In-Situ Grown Nanostructured Zno Via A Green Approach and Gas Sensing Properties of Polypyrrole/Zno Nanohybrids

Enhanced Gas Sensing Characteristics of a Polythiophene Gas Sensor Blended with UiO‐66 via Ligand Functionalization

Highly Ammonia Sensing Using Direct In Situ Electro-Deposited Polypyrrole-Dodecylbenzene Sulfonic Acid Film on ITO Coated Flexible Substrates

Effect of Salt Content and Operating Temperature on the Nitrogen Dioxide Gas Sensing Performance of Sodium-Ion Conducting Solid Polymer Electrolyte

Broad-class volatile organic compounds (VOCs) detection via polyaniline/zinc oxide (PANI/ZnO) composite materials as gas sensor application

Polypyrrole-based sensors for volatile organic compounds (VOCs) sensing and capturing: A comprehensive review

Porous Polypyrrole/Polymethylmethacrylate Composite Film Prepared by Vapor Deposition Polymerization of Pyrrole and Its Application for Ammonia Detection

Oxidative polymerization of pyrrole in the presence of a poly (sodium-p-styrenesulfonate) and its gas-responses

Tailoring Polypyrrole Film Characteristics with Multi-step Oxygen Plasma Treatment for High-Performance Strain Sensors: Impact on Bonding, Microstructure, and Electrical responsivity

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor