Abstract:Air quality monitoring is of major concern as it is directly linked to public health. It requires the development of high sensitive devices with fast response towards hazardous gas and volatile compounds. Such performances depend on the nature and quality of deposition of the sensing layer. Herein, adherent polypyrrole-dodecylbenzene sulfonic acid (PPy–DBSA) films were deposited on a N-(3-trimethoxysilylpropyl) pyrrole modified ITO coated polyethylene teraphtalate (PET) flexible substrate by facile direct electrochemical oxidation of pyrrole in an aqueous solution of sulfonic acid. The obtained PPy-DBSA films were subjected to various characterization techniques such as, FTIR, Raman, SEM and conductivity measurements. Chemiresistive gas sensing tests have demonstrated selectivity and sensitivity of films toward ammonia vapors over the other vapors (nitrogen dioxide, carbon dioxide, hydrogen sulfide, acetone, methanol and ethanol) with higher response at 20 ppm, reasonably fast response time of 3 min and reaching detection limit of 3ppm. The response of the sensor can reasonably be related to the strong electrostatic interactions between vapor molecules and the dopant agents within PPy films. In comparison PPy-DBSA films prepared on pristine ITO/PET has exhibited lower response at 20 ppm of ammonia exposure, which highlights the role of surface modification and the contribution from the dopant agent nature for ammonia sensing. Moreover, chemiresistive response performances have been tested in the presence of humidity, under varied temperatures, and finally their behaviors were featured by an impedance spectroscopy in both presence and absence of gas. This work conclusively shows that the sensing performances are not only driven by the molecular interactions between the sensor and the analyte but also by the quality of deposition and adhesion of the former to the transducer. The latter feature can be controlled by appropriate chemical surface modification.

Porous Polypyrrole/Polymethylmethacrylate Composite Film Prepared by Vapor Deposition Polymerization of Pyrrole and Its Application for Ammonia Detection

The Research and Application of Polyaniline/Multi-Walled Carbon Nanotubes Composite Sensitive Membrane for Ammonia Gas Detection

Fabrication and Ammonia Gas Sensing of Palladium/polypyrrole Nanocomposite

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

QCM Gas Sensor Based on Polypyrrole for Trimethylamine Detection"

Gas sensitivity of a composite of multi-walled carbon nanotubes and polypyrrole prepared by vapor phase polymerization

Crosslinked and quaternized poly(4-vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity.

Electrosynthesis of polypyrrole/sulfonated polyaniline composite films and their applications for ammonia gas sensing

Fabrication of Reproducible and Selective Ammonia Vapor Sensor-Pellet of Polypyrrole/Cerium Oxide Nanocomposite for Prompt Detection at Room Temperature

Highly Ammonia Sensing Using Direct In Situ Electro-Deposited Polypyrrole-Dodecylbenzene Sulfonic Acid Film on ITO Coated Flexible Substrates

Fabrication of Polypyrrole Composite Film Based Trimethylamine Sensor Via Simple Method

A composite of quaternized and crosslinked poly(4-vinylpyridine) with processable polypyrrole for the construction of humidity sensors with improved sensing properties

Electrical Conductivity Based Ammonia Sensing Properties of Polypyrrole/MoS2 Nanocomposite

Polyaniline/palladium Nanohybrids for Moisture and Hydrogen Detection

A composite of polyelectrolyte-grafted multi-walled carbon nanotubes and in situ polymerized polyaniline for the detection of low concentration triethylamine vapor.

Composite nanofibers of conducting polymers and hydrophobic insulating polymers: Preparation and sensing applications

Facile, Low‐Cost and Flexible Ammonia Sensor Arrays Based on Metallic Ion Charge Carriers and Polymer Matrices

Raman and XPS studies of ammonia sensitive polypyrrole nanorods and nanoparticles

A Cyanine Dye Encapsulated Porous Fibrous Mat for Naked-Eye Ammonia Sensing.

Polypyrrole–Tungsten Oxide Nanocomposite Fabrication through Laser-Based Techniques for an Ammonia Sensor: Achieving Room Temperature Operation