Abstract:Manganese oxides and carbon materials are both desirable catalysts for persulfate (PS) advanced oxidation processes in environmental remediation. Nevertheless, manganese oxides suffer from low reusability while carbon materials face the problem of limited catalytic efficiency. For the purpose of making full use of the advantages of the two materials as well as avoiding their shortcomings, carbon-coated Mn3O4 composites (Mn3O4/C) with a regular nanocube structure were designed to activate PS for the removal of organics, and the catalytic processes were deeply investigated. The catalyst prepared at 400 °C with a precursor ratio (glucose/KMnO4) of 0.5 exhibited the best catalytic performance along with satisfactory reusability owing to the protection of the outer carbon layer. According to experimental results and density functional theory calculation, there were van der Waals interaction and a part of the strong attraction between the interface of PS and Mn3O4/C, which could be enhanced by inner Mn3O4 and thus promoted the electron transfer between PS and carbon shell, and the defective edges of the carbon layer with hydroxyl (C–OH) groups could act as active sites for PS activation. Radical (SO4•–, •OH) and nonradical (1O2) oxidation processes both participated in the degradation of 2,4-dichlorophenol, in which •OH was dominating. This study not only proposed a promising catalyst for the degradation of pollutants but also expanded research ideas for future PS activation mechanism studies by integrating the experiment and simulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04049?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04049</a>.Experimental detection method and pseudo-first-order kinetics fitting model; XRD, SEM, nitrogen adsorption–desorption isotherms, FTIR spectrum, and XPS survey of the catalyst; TOC changes of 2,4-D; pseudo first-order kinetics fitting of the reaction; effects of PS and catalyst dosage; zeta potentials of 0.5-Mn3O4/C-T4; linear correlation results between pH and kobs; dynamic changes of solution pH with the low PS concentration; molecular structure of pollutants; degradation of 2,4-D by different carbon materials; cyclic voltammograms; optimized structures of models for DFT calculation; RDG isosurfaces of COH/PS; effects of MeOH and TBA on 2,4-D removal efficiency; decomposition of PS in the presence of NaN3; pore structure parameters of materials; and distance, bond length, and Bader charge in different structures (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04049/suppl_file/cs0c04049_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Sustainable Synthesis of Modulated Fe-MOFs with Enhanced Catalyst Performance for Persulfate to Degrade Organic Pollutants.

Controllable synthesis of FeMn bimetallic ferrocene-based metal-organic frameworks to boost the catalytic efficiency for removal of organic pollutants

Synthesis of Oxygen Vacancy-Enriched N/P Co-Doped CoFe2O4 for High-Efficient Degradation of Organic Pollutant: Mechanistic Insight into Radical and Nonradical Evolution.

MOFs-derived hollow FeCo@C as peroxymonosulfate activator for degradation of organic pollutants: Insight into the catalytic sites by experimental and theoretical study

Selective Oxidation Behavior Based on Iron-Doped MOF Derived Carbon-Based Catalysts: Active Site Regulation and Degradation Mechanism Analysis

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism

Rational Regulation of Peroxymonosulfate Activation over Porous Co3O4 with Carbon Coating to Boost Utilization Efficiency of Peroxymonosulfate and Achieve Rapid Removal of Pollutants.

Synergistic effect of PMS activation by Fe<SUP>0</SUP>@Fe<sub>3</sub>O<sub>4</sub> anchored on N, S, O co-doped carbon composite for degradation of sulfamethoxazole

Origin of the Enhanced Reusability and Electron Transfer of the Carbon-Coated Mn 3 O 4 Nanocube for Persulfate Activation

Iron-Based Dual Active Site-Mediated Peroxymonosulfate Activation for the Degradation of Emerging Organic Pollutants

Effects of different dissolved organic matter on peroxymonosulfate activation over Co-Fe binary metal: Experiments and density functional theory

Electronic structure regulation of Fe single atom coordinated nitrogen doping MoS2 catalyst enhances the Fenton-like reaction efficient for organic pollutant control

Highly efficient and selective organic pollutants degradation via peroxymonosulfate activation over micron-sized Co-MOF: Nearly 100% singlet oxygen mechanism

Mechanistic insight into active species formation during Fenton-like processes by regulating dissimilar charged groups on Fe 3 O 4 nanospheres

Strongly coupled Fe 3 O 4 quantum dots-3D N-enriched carbon aerogel towards boosting peroxydisulfate activation by electron redistribution of multiple active sites

Surface and Morphology Modulated Adsorption-Activation of Trace Concentration Hydrogen Peroxide with Multiple Electron Transfer Pathways and Sustained Fenton Reactions

Persulfate activation by novel iron–carbon composites for organic contaminant removal: Performance, mechanism, and DFT calculations

Accelerated Fe3+/Fe2+ cycle in Mo2C-based Fe catalyst to promote peroxymonosulfate activation

Peroxymonosulfate activation by graphene oxide-supported 3D-MoS2/FeCo2O4 sponge for highly efficient organic pollutants degradation