Abstract:Reversed austenite is of vital importance in low-carbon martensitic stainless steel because it improves impact toughness. However, a proper amount of reversed austenite is obtained by tempering at a critical temperature, which reduces the strength of the steel. Therefore, how to improve strength-toughness matching is an important problem. Copper (Cu) is an effective strengthening element in steels. However, there is little in-depth discussion on the role of Cu on the microstructure and mechanical properties of low-carbon martensite steel. In this work, the effect of different Cu content on the reversed austenite formation, tensile strength, and impact toughness of a low-carbon martensitic stainless steel (0Cr13Ni4Mo) was systematically investigated through use of a transmission electron microscope (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT), and other characterization methods and mechanical property tests. The results showed that the addition of Cu decreased the phase transition temperatures of martensite and austenite and increased the volume fraction of the reversed austenite. APT results indicated that Cu-rich clusters first formed with alloying elements such as ferrum (Fe) and nickel (Ni) and then grew to be precipitates through rejection of the alloying elements. The Ni atoms diffused towards the interface between the precipitates and the martensite matrix, which provided heterogeneous nucleation sites for the reversed austenite. Cu precipitations strengthened tensile strength during tempering. However, it generated temper brittleness in the steel at a tempering temperature of 450 °C, resulting in the impact energy of the 3Cu-steel being only 7 J. A good combination with higher tensile strength (863 MPa) and ductility (192 J) was obtained when tempering at 600 °C in the presence of Cu-rich precipitates and a sufficient volume fraction of the reversed austenite. The results provide guidance for the design of steels with reversed austenite and Cu and promote the development of high-strength and high-toughness steels.

Correlation between reversed austenite and mechanical properties in a low Ni steel treated by ultra-fast cooling, intercritical quenching and tempering

Influence of Intercritical Temperature on the Microstructure and Mechanical Properties of 6.5 Pct Ni Steel Processed by Ultra-fast Cooling, Intercritical Quenching and Tempering

Enhancing Ductility of Martensitic Steels Through Cryogenic Treatment

Correlations of Ni Contents, Formation of Reversed Austenite and Toughness for Ni-Containing Cryogenic Steels

Advancement of strength and toughness in ultra-low carbon martensitic stainless steel by reversed austenite

Nano-sized Austenite and Cu Precipitates Formed by Using Intercritical Tempering Plus Tempering and Their Effect on the Mechanical Property in a Low Carbon Cu Bearing 7 Ni Steel

Effect of Quenching, Lamellarizing, and Tempering on Reversed Austenite and Cryogenic Toughness of 9Ni Steels

Effects of Tempering Temperature on the Microstructure Evolution and Mechanical Properties of 16%cr–5%ni Super Martensitic Stainless Steel

Influence of Direct Lamellarizing-Tempering Process Parameters on Microstructure and Properties of 9 Ni Steel

The Role of Retained Austenite on the Mechanical Properties of a Low Carbon 3Mn-1.5Ni Steel

Effect of aging temperature on the austenite reversion and mechanical properties of a Fe–10Cr–10Ni cryogenic maraging steel

Numerical Simulation of Reversed Austenite Evolution during Intercritical Tempering of Low-Carbon Martensitic Stainless Steel

On Earlist Formation of Reverted Austenite of 23 Co14 Ni12 Cr3 Steel

Effect of Reverse Austenite on the Cryogenic Tensile Properties of 0cr13ni4mo Martensitic Steel

Evolution of microstructures and mechanical properties with tempering temperature of a pearlitic quenched and tempered steel

Effect of Cu on the Microstructure and Mechanical Properties of a Low-Carbon Martensitic Stainless Steel

Study on Microstructure and Mechanical Properties of TMCP-UFC-LT Treated Low Ni Steel

Effect of Austenitizing Temperature and Retained Austenite on Mechanical Properties of 2200MPa Grade Ultra-High Strength Steels

Effect of Aging Temperature on the Microstructural Evolution and Mechanical Properties of 18ni (200) Maraging Steel

Effect of Temperature on Microstructure and Mechanical Properties of Fe-9Ni-2Cu Steel during the Tempering Process

Effect of aging temperature on the heterogeneous microstructure and mechanical properties of a 12Cr–10Ni–Mo–Ti maraging steel for cryogenic applications