Pollutant removal performance of the bioenergy-producing constructed wetlands under unstable loading conditions: Carbon and metallic electrode

Tanveer Saeed
DOI: https://doi.org/10.1016/j.jwpe.2024.104866
IF: 7
2024-01-28
Journal of Water Process Engineering
Abstract:This study reports the pollutant removal performance of the waste jhama brick media-based four carbon and metallic electrode-based planted wetlands designed to treat hardly degradable real municipal wastewater. The wetland systems were operated under unstable loading conditions that were artificially created by introducing sequential constant hydraulic loading (250 mm/d) followed by short-term rapid hydraulic load increment (1500 mm/d), i.e., shock load cycles. Overall mean biodegradable organic compounds, nitrogen, phosphorus, and coliform removal percentage ranges of the four bioenergy-producing wetlands were 85 %–94 %, 47 %–84 %, 67 %–98 %, and 69 %–96 %, respectively, under such unstable loading conditions. Nitrogen and phosphorus accumulation percentages in plant tissues ranged between 0.02 % and 3 % with respect to total removal. Substantial phosphorus accumulation (1100–1900 mg phosphorus/kg) was observed with the used jhama brick media compared to the unused media concentration profiles (500 mg phosphorus/kg). The metallic steel electrode-based wetlands (with and without carbon-felt) achieved more stable pollutant removal than the carbon electrode (graphite and steel mesh-charcoal)-based wetlands. Pollutant removal performance improved with the electrode-based wetlands during shock load periods (compared to preceding constant load phases). The carbon electrode-based wetlands produced a mean maximum power density between 2055 and 3204 mW/m 3 . These ranges exceeded the mean maximum bioenergy production, i.e., 69–2297 mW/m 3 of the metallic electrode-based systems. This study demonstrated the synergetic impact of wetland components (electrodes, plants, and media) on pollutant removals and bioenergy production under rapidly variable loading conditions.
engineering, chemical, environmental,water resources
What problem does this paper attempt to address?