Abstract:In the building environment, PM2.5 seriously affects people's health and quality of life, so it is necessary to study the particle deposition characteristics. In addition, it is essential for a thorough investigation of the dust removal mechanism to understand the non-spherical particles deposition characteristics. The stacking angle experiment was used to calibrate the discrete element simulation parameters. And four simulation methods (CFD-DPM, CFD-DEM, API interface loading drag model based on EDEM software and EDEM simulation) were used to numerically simulate the non-spherical particles deposition characteristics. The optimal simulation method EDEM was applied to study the non-spherical particles deposition characteristics in filter media, which saves the calculation time obviously. On this basis, the particle parameters on the particle deposition characteristics of filter media were investigated. The results show that the deposition rate of non-spherical (special shape) particles with the same volume is basically consistent on the filter media, hence it is more realistic that the dust actual shape is simplified into the triangular-shaped particles. As the particle size increases, the number of deposited particles on the filter media decreases. And the larger the particle size, the more dispersed the distribution. It has a significant impact on the number of particles deposited on the filter media when the particle velocity is 0.1 m/s. The particle deposits to the lower part of the filter media in the form of a parabola and deviates from the outlet seriously at 0.1 m/s. Moreover, it has little effect on the number of particle deposition at the other velocities, and most particles are deposited on the upper part of the filter media with the increase of particle velocity.

Development and Evaluation of a Particle Deposition Measurement Method Based on a CCD Imaging Chip

A CCD-based measurement system for dust mass concentration through light scattering

Development of Optical Small Particles Counting Device

On-line High-Accuracy Particulate Matter Monitoring Technology Using Multi-Channel Scattering Signals

Electric charge effect of micro-droplets generated by electrospray atomization on removal of indoor fine particulate matter

Design and optimization of a fine particle detector based on forward and lateral light scattering measurement

Development of a new Portable Ultrafine Particle Sizer for Indoor Aerosol Monitoring

Experimental Measurement and Numerical Simulation of Particle Deposition on Super–hydrophobic Surface

Dust Concentration Measurement for Laying House Using Digital Imaging Technology.

Design and Research of In-process Particle Size Measurer

Size-Resolved Surface Deposition And Coagulation Of Indoor Particles

An experimental approach to measure particle deposition in large circular ventilation ducts

A Miniaturized Particulate Matter Sensing Platform Based on CMOS Imager and Real-Time Image Processing

A Micro Aerosol Sensor for the Measurement of Airborne Ultrafine Particles

A Miniature Aerosol Sensor for Detecting Polydisperse Airborne Ultrafine Particles

Measurement of Particle Size Based on Digital Imaging Technique

A Simple Optical Aerosol Sensing Method of Sauter Mean Diameter for Particulate Matter Monitoring

Numerical investigation of non-spherical particle deposition characteristics on filter media

Research on Particle Concentration Detection System Based on Laser Scattering Method

Evaluating the Feasibility of a Personal Particle Exposure Monitor in Outdoor and Indoor Microenvironments in Shanghai, China.

Deposition of ambient ultrafine particles in the respiratory tract of children: A novel experimental method and its application