Abstract:It is urgent to develop excellent solid CO2 sorbents with higher sorption capacity, simpler synthetic process, better thermal stability and lower costs of synthesis in CO2 capture and storage technologies. In this work, a number of Li4SiO4-based sorbents synthesized by lithium carbonate with three different kinds of fly ashes in various molar ratios were developed. The results indicate that the Li2CO3:SiO2 mole ratio used in the sorbents synthesis significantly affects the CO2 absorption properties. The sorption capacity increased with the excess of Li2CO3 first and then decreased when the excessive quantity was beyond a certain amount. The experiments found that FA-Li4SiO4_0.6, CFA-Li4SiO4_0.4, HCl/CFA-Li4SiO4_0.3 presented the best sorption ability among these fly ash derived Li4SiO4 samples, and the corresponding weight gain was 28.2 wt%, 25.1 wt% and 32.5 wt%, respectively. The three sorbents with the optimal molar ratio were characterized using various morphological characterization techniques and evaluated by thermogravimetric analysis for their capacity to chemisorb CO2 at 450°C - 650°C, diluted CO2 (10%, 20%) and in presence of water vapor (12%). The adsorption curve of FA- Li4SiO4_0.6 at different temperatures was simulated with the Jander-Zhang model to explore the influence of carbon dioxide diffusion on adsorption reaction. Further experiments showed that the adsorbent had a good sorption capacity in a lower partial pressure of CO2 and the presence of steam enhanced the mobility of Li+. What’s more, FA-Li4SiO4_0.6, CFA-Li4SiO4_0.4 and HCl/CFA-Li4SiO4_0.3 particles showed satisfactory sorption capacity in fixed-bed reactor and excellent cyclic sorption stability during 10 sorption/ desorption cycles.

Sol-gel Derived, Na/K-doped Li4SiO4-based CO2 Sorbents with Fast Kinetics at High Temperature

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Enhanced high temperature cyclic CO2 capture on Li4SiO4 sorbent from two-dimensional SiO2 nanomeshes

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

CO2 high-temperature sorbent (Al, Fe, Ti) CO-doped Li4SiO4 from fly ash-derived SiO2 aerogel: In-situ synthesis, enhanced capture ability and long cycle stability

High Performance of Fly Ash Derived Li 4Sio4-Based Sorbents for High Temperature CO2 Capture

Molten shell-activated, high-performance, un-doped Li4SiO4 for high-temperature CO2 capture at low CO2 concentrations

Impregnation Precipitation Preparation And Kinetic Analysis Of Li4sio4-Based Sorbents With Fast Co2 Adsorption Rate

Adsorption of high-temperature CO2 by Ca2+/Na+-doped lithium orthosilicate: characterization, kinetics, and recycle

Novel Li4SiO4-based Sorbents from Diatomite for High Temperature CO2 Capture

Preparation and Kinetic Analysis of Li 4 SiO 4 Sorbents with Different Silicon Sources for High Temperature CO 2 Capture

Structurally improved Li4SiO4 sorbents derived from lithium salicylate precursor for enhanced CO2 capture

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Efficient carbon dioxide adsorption properties of cellular structure Li 4 SiO 4 sorbents prepared by additive manufacturing based on polymer-derived ceramics strategy

Kinetic analysis for cyclic CO 2 capture using lithium orthosilicate sorbents derived from different silicon precursors.

CO2 Capture Performance of CaO-Based Sorbents Prepared by a Sol–Gel Method

Absorption Behaviors Study on Doped Li4SiO4 under a Humidified Atmosphere with Low CO2 Concentration

Solution combustion synthesis derived Li4SiO4 for post-combustion carbon capture

CO2 capture by Li2CaSiO4 and enhancement with alkali carbonates