Abstract:Spent lithium-ion batteries recycling have become the key to the sustainable development of new energy vehicle industry due to its potential environmental risks and scarcity of critical metals. In this paper, rapid separation and efficient recovery of lithium and manganese were achieved through "manganese precipitation - acid leaching of manganese - impurities removal by sulfide precipitation" for the leaching solution of spent lithium-ion batteries powder. Based on the thermodynamic simulation of element precipitation behavior in Li+-Mn2+-Ni2+-Co2+-F--SO42--Ca(OH)(2)-H2O system, Ca(OH)(2) was used to adjust the system pH of Li-Mn solution to 10, the elements such as Mn, Ni, Co, Ca and F were precipitated simultaneously as Mn(OH)(2(s)), Ni(OH)(2(s)), Co(OH)(2(s)), CaSO4(s) and CaF2(s). Whereas the loss rate of lithium was less than 0.2 %. Battery-grade lithium carbonate (Li2CO3 99.80 %) was prepared from the lithium purification solution with the carbonation method. Using 30 % H2O2 as reductant, the leaching rate of Mn from the manganese precipitate residue was 99.77 %. In order to realize the deep purification of manganic acid leaching solution, solid manganese sulfide was selected as the precipitant, and impurities such as Co, Ni, Ca and F were selectively precipitated as CoS(s), NiS(s) and CaF2(s), respectively, at pH = 5.0. Subsequently, battery-grade manganese sulfate was successfully prepared from the pure MnSO4 solution by evaporation - crystallization. In this study, the introduction of cationic impurities such as Na+ and NH4+ was avoided during Li-Mn separation and acid-leachate purification through the selection of suitable neutralizer and sulfide precipitant. As a result, the process flow was greatly simplified, and the direct yields of lithium and manganese were effectively improved.

Recovery of Lithium and Manganese from Scrap LiMn2O4 by Slurry Electrolysis

Efficient separation and recovery of lithium and manganese from spent lithium-ion batteries powder leaching solution

Spent Lithium-Ion Battery Recycling - Reductive Ammonia Leaching of Metals from Cathode Scrap by Sodium Sulphite

Recovery of battery-grade products from mixed spent LiFePO4/LiMn2O4 cathodes via slurry electrolysis

Recovering valuable metals from the leaching liquor of blended cathode material of spent lithium-ion battery

Efficient and Economical Recovery of Lithium, Cobalt, Nickel, Manganese from Cathode Scrap of Spent Lithium-Ion Batteries

Hydrometallurgical Recovery of Metal Values from Sulfuric Acid Leaching Liquor of Spent Lithium-Ion Batteries.

Leaching Process for Recovering Valuable Metals from the LiNi1/3Co1/3Mn1/3O2 Cathode of Lithium-Ion Batteries.

Novel electrochemical process for recycling of valuable metals from spent lithium-ion batteries

Separation and Recovery of Metal Values from Leach Liquor of Waste Lithium Nickel Cobalt Manganese Oxide Based Cathodes

Recover value metals from spent lithium-ion batteries via a combination of in-situ reduction pretreatment and facile acid leaching

Sustainable Recovery of Cathode Materials from Spent Lithium-Ion Batteries Using Lactic Acid Leaching System

Recycling of Li-Ion Batteries from Industrial Processing: Upscaled Hydrometallurgical Treatment and Recovery of High Purity Manganese by Solvent Extraction

Sustainable recovery of valuable metals from spent lithium-ion batteries using DL-malic acid: Leaching and kinetics aspect

Lithium-Ion Battery Recycling: Metal Recovery from Electrolyte and Cathode Materials by Electrodialysis

Thermal Treatment and Ammoniacal Leaching for the Recovery of Valuable Metals from Spent Lithium-Ion Batteries.

Recovery of cobalt, lithium, and manganese from the cathode active materials of spent lithium-ion batteries in a bio-electro-hydrometallurgical process

Efficient Leaching of Manganese from Electrolytic Manganese Residue and Recovery of the Leaching Solution: Reuse and Purification

Recovering valuable metals from LiNixCoyMn1-x-yO2 cathode materials of spent lithium ion batteries via a combination of reduction roasting and stepwise leaching

Recycling Metals from Lithium Ion Battery by Mechanical Separation and Vacuum Metallurgy.

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes