Abstract:The grouting method is often used to strengthen the bearing capacity of building foundations. In the process of grouting, the stress structure of slurry and rock and the soil mass under the condition of high permeability and high stress ("double height") is complex, and the strength mechanism of slurry stone under different double-height conditions is not clear. Therefore, stone samples of grout under the curing pressures of 2 MPa, 4 MPa, 6 MPa, 8 MPa and 10 MPa were prepared for the uniaxial compression test to analyze the influence of curing pressure on compressive strength. The microstructure of the slurry stone was observed by scanning electron microscope, and the development law of microcracks was further studied using the particle flow program. The research shows that the strength of the slurry stone body increases with the increase of curing pressure. When the curing pressure increases from 2 MPa to 10 MPa, the compressive strength of the stone powder-cement slurry stone body increases from 8.3 MPa to 22.7 MPa, an increase of nearly 2.7 times, and the compressive strength of the clay-cement slurry stone body increases from 5.7 MPa to 16.8 MPa, an increase of 2.9 times. According to the axial compressive stress-strain curve of the specimen, the failure process goes through three continuous stages: continuous elasticity, crack propagation, and strength failure. When the stress peak is reached, the number of cracks increases slowly; when the stress peak is reached, the cracks expand rapidly, the number increases exponentially, and a penetrating main crack is finally formed, which destroys the specimen. This study provides a reliable basis for the selection of grouting parameters and grouting materials in stratum-grouting engineering.

Prediction of Compressive Stress-Strain Curves of Grouted Masonry

Experimental Research on Grouted Concrete Block Masonry's Constitutive Law under Plain Stress State

Stress–strain Model for Hollow Concrete Block Masonry under Uniaxial Compression

Simple Three-Step Analytical Scheme for Prediction of Elastic Moduli of Hardened Cement Paste

FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Behavior of Mortar-Less Masonry Joint under Cyclic Shear-Compression Loading

An Experimental Investigation of Mechanical Properties in Clay Brick Masonry by Partial Replacement of Fine Aggregate with Clay Brick Waste

Experiment and simulation for constitutive relationship of autoclaved fly ash brick masonry

Constitutive Modeling for Unreinforced Masonry Materials

A Method for Determining Ultimate Grouting Pressure for Reinforcement of Masonry Arch Dam with Mortar Deterioration: A Case Study

Experimental Research on Biaxial Compressive Strength of Grouted Concrete Block Masonry

Mechanical properties and nonlinear deformation description model of cement stone

Experimental Study of Anisotropic Strength Characteristics of Grouted Concrete Block Masonry

Study on Stress-Strain Behaviour of Mud Stone from Triaxial Test

Strength Laws and Crack Evolution Mechanism of Slurry Grouting under High-Permeability and High-Stress Curing Conditions

Mechanical responses of freeze–thaw treated natural stone masonry subject to compressive variable amplitude fatigue loading: Insights from stiffness loss and constitutive characterization

Essential Stressing State Features of Laterally Loaded Masonry Wall Panels Revealed from Experimental Displacements

Analytical modeling of masonry load-bearing walls

Failure Criteria for Grouted Concrete Block Masonry under Biaxial Compression

Experimental Study and Analytical Formulation of Mechanical Behavior of Concrete