Abstract:Effect of surface treatment on hybrid carbon/ramie epoxy composites. Hybrid polymer composites' lightweight, biodegradability, damping, and cost‐effectiveness have made them popular in recent decades. This study evaluated the raw and alkali‐treated hybrid composite's free vibration studies and mechanical properties by changing the ramie fiber layers (core) from two to four and keeping the carbon fiber layers (top and bottom) constant. Thus, to enhance the mechanical properties, the ramie fiber was treated prior with 2, 3, and 4 wt% of sodium hydroxide (NaOH). These composites were characterized chemically, mechanically, morphologically, and vibrationally via Fourier transform infrared spectroscopy, flexural and tensile tests, field emission scanning electron microscope, and free vibration setup, respectively. The tensile and flexural samples were loaded under quasistatic conditions and tested at 1 and 2 mm/min to evaluate tensile and flexural properties, respectively, and a free vibration test built the natural frequencies and reliable damping factor using clamped‐clamped and clamped‐free boundary conditions. Two layers of carbon fiber (exterior layer) and two layers of ramie fiber (core layer) at 3 wt% NaOH produced maximum tensile strength (523 MPa) and flexural modulus (68,869 MPa) among natural and hybrid composite combinations. This study shows that hybridization and alkaline treatment improve composite material mechanical properties in a specific ratio. Highlights Mechanical and vibration analysis of carbon/ramie hybrid composites was studied. Ramie fiber's surface treatment was carried out in NaOH at 2, 3, and 4 wt%. Surface treatment uplifts mechanical and vibration properties than untreated. Ramie fiber's chemical consequences were analyzed through Fourier transform infrared spectroscopy and field emission scanning electron microscope tests. Surface treatment at 3 wt% builds higher mechanical and vibrational properties.

Grafting of nano-silica onto ramie fiber for enhanced mechanical and interfacial properties of ramie/epoxy composite

Grafting Ramie Fiber with Carbon Nanotube and Its Effect on the Mechanical and Interfacial Properties of Ramie/epoxy Composites

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Characterization of Amino Silane Modified Ramie Fibre, OMMT Nanoclay-reinforced Epoxy Resin Composite

Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric

Surface modification of ramie fibers with silanized CNTs through a simple spray-coating method

Effect of alkali and silane treatments on properties of green composites based on ramie fibers and cellulose acetate resin

Study on the performance of ramie fiber modified with ethylenediamine

Mechanical and vibrational study of raw and surface‐treated ramie fiber hybridized carbon fiber epoxy composites

Influences of sodium hydroxide and oxalic acid treatments on physical, mechanical, thermal properties, and morphology of ramie fibers

Mechanical and Dynamic Mechanical Properties of the Amino Silicone Oil Emulsion Modified Ramie Fiber Reinforced Composites

Influence of washing with sodium lauryl sulphate (SLS) surfactant on different properties of ramie fibres

Preparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites

Hot Compaction and Mechanical Properties of Ramie Fabric/Epoxy Composite Fabricated Using Vacuum Assisted Resin Infusion Molding

Study on water absorption of hydrophobically modified ramie fiber and the reinforced polypropylene composites

Effect of Ageing on Silane Surface Modified Cashew Nut De-Oiled Husk Biosilica on Mechanical, Fatigue and Dynamic Mechanical Analysis of Ramie Fiber-Reinforced Vinyl Ester Resin Composite

Effect of Adding Rice Husk Ash Functional Silicon Additives on Flammability Wear and Thermal Stability of Ramie-Epoxy Composite

Interfacially Reinforced Carbon Fiber Composites by Grafting Modified Methylsilicone Resin

Characterization of fiber/matrix interfacial bonding strength of chemically grafted aramid fiber surface with epoxy resin composites

Study on the mechanical properties of ramie fiber/polypropylene composites prepared by hot pressing after the carding machine mixing