Abstract:Offshore pipelines crossing fault rupture areas suffer the risk of local buckling, which can in turn initiate propagating buckles. This study presents the results of evaluating several series of local collapses, subsequent propagating buckles, temporary buckling arrests, and crossover simulations of a deformed (due to reverse fault displacements) offshore pipeline under external overpressure. A numerical model of a buried pipeline with a single (twin) integral arrestor(s) was developed using a nonlinear vector form intrinsic finite element method. The residual external pressure capacity of a deformed pipeline after reverse fault displacements was assessed. Single integral arrestors at different installation sites and twin integral arrestors of different lengths were tested. Effects of fault dip angles on the propagation and arrest of collapse failures were investigated. The longitudinal and bending deformations caused by reverse fault displacements result in a significant decrease in the external pressure resistance of offshore pipelines. Four weak areas appeared around the bending regions, the size relationship of their collapse pressures determined the sequence of multiple local collapses and directions of the subsequent propagating buckles. Integral arrestors are effective designs with significant arresting efficiency in such scenarios. The flexure curve of the pipeline changed significantly only when an arrestor was installed in the left- or right-bending region. A large fault dip angle leads to both higher first collapse pressures and crossover pressures due to smaller bending deformations. A flipping crossover occurs when a downstream reverse ovality develops, which rotates the collapse direction by 90°. The material efficiency of integral arrestors will decrease with the occurrence of flipping crossovers.

The Arresting Performance of Integral Buckle Arrestor for Sandwich Pipe Systems

An Experimental and Numerical Study on Inward Integral Buckle Arrestors for Pipe-in-pipe Systems

Assessment of arresting performance of integral buckle arrestors for sandwich pipes using machine learning techniques

Buckle Propagation of Sandwich Pipes under External Pressure

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

On the Arresting Efficiency of CFRP-winding Buckle Arrestors for Subsea Pipelines

On the buckling propagation and its arrest in buried offshore pipeline crossing strike-slip fault

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

Influences of interface bonding behavior on the arresting performance of CFRP buckle arrestors - Part I: Experiments

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Steady Dynamic Buckle Propagation Simulation of Confined Pipelines under External Pressure by User Defined Elements in ABAQUS

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Predictions of failure mode and arresting efficiency of integral buckle arrestors using FEM and machine learning methods

Propagation and arrest of collapse failures in a buried offshore pipeline crossing reverse fault areas

Buckling analysis of subsea pipeline with integral buckle arrestor using vector form intrinsic finite thin shell element

Lateral Buckling of Subsea Pipelines Triggered by Combined Sleeper and Distributed Buoyancy Section

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Analysis and design of mechanical crack arrestors for gas pipeline

Pipeline Lateral Buckling Triggered by the Residual Curvature with Tri-Linear Axial Pipe-Soil Interaction

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure