Abstract:Volatile organic compounds (VOCs) are one of the major components of air pollution. Catalytic combustion is a promising technology for the treatment of VOCs and at its center is the preparation of efficient and cheap catalysts. In this study, by loading copper (Cu) and manganese (Mn) on Santa Barbara Amorphous-15 (SBA-15) molecular sieve, the Cu x –Mn y /SBA-15 ( x = 1, 2; y = 1, 2) composite metal oxide catalyst was prepared using the equal volume impregnation method. Their performance in the toluene catalytic combustion reaction was investigated by adjusting the molar ratio ( x : y ), and the loading of Cu and Mn. The results of the Brunner–Emmett–Teller (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analyses show that the CuMnO spinel phase can be detected in the Cu–Mn composite metal oxide catalyst doped with a low concentration of Cu. The overall rod-like structure of the fibrous network structure provides a large specific surface area, and the particle crystallinity is low and the dispersion is good. Due to the synergistic effect of Cu and Mn, the greater the amount of Mn 3+ and adsorbed oxygen species (O ads ) that are available, and the higher the turnover frequency (TOF) value, the better and more superior catalytic performance and excellent stability is obtained, when compared with the single-component oxides used in toluene catalytic combustion. After a continuous catalytic reaction for 12 h, the toluene conversion rate remained above 95%. The coupling effect of the catalytic reaction temperature and concentration of oxygen on the catalytic combustion of toluene was also studied. At a low reaction temperature (<250 °C), the increase of the concentration of oxygen played a superior role in promoting the conversion of toluene. The kinetic analysis of the toluene catalytic combustion process showed that the catalytic combustion of toluene by Cu–Mn/SBA-15 followed both the Mars–Van Krevelen (MVK) and Langmuir–Hinshelwood (L–H) reaction mechanisms. With the increase of the O ads amount caused by the decrease of the Cu ratio, the proportion of the L–H reaction mechanism increases.

The Influence of Annealing Temperature on Copper-Manganese Catalyst Towards the Catalytic Combustion of Toluene: the Mechanism Study

Catalytic Ozonation of Toluene over Amorphous Cu-Mn Bimetallic Oxide: Influencing Factors, Degradation Mechanism and Pathways.

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

Enhanced catalytic oxidation of toluene over manganese-based multi-metal oxides synthesized by ozone driving redox reaction

Catalytic Ozonation of Toluene over Spinel Cumn2o4: Influencing Factors, Reaction Mechanism and Pathways

One-pot synthesis of dual-phase manganese dioxide for toluene removal: Effect of crystal phase blending level on oxygen species and activity

Effect of ambient factors over spinel CuMn2O4 for toluene catalytic ozonation: Enhancement of the synergy and the generation of ROS

Low-Temperature Combustion of Toluene over Cu-Doped SmMn<sub>2</sub>O<sub>5</sub> Mullite Catalysts via Creating Highly Active Cu<SUP>2+</SUP>-O-Mn<SUP>4+</SUP> Sites

An investigation of the activity and mechanism of the catalytic oxidation of toluene by FeMnO x catalyst

Insights into tuning toluene oxidation intermediates by phase structures of Mn-based catalysts

Low-Temperature Oxidation of Toluene over MnOx-CeO2 Nanorod Composites with High Sinter Resistance: Dual Effect of Synergistic Interaction on Hydrocarbon Adsorption and Oxygen Activation

Boosting the total oxidation of toluene by regulating the reactivity of lattice oxygen species and the concentration of surface adsorbed oxygen

Insight into the pH effect over the oxygen species and Mn chemical valence of Co-Mn catalysts for the total toluene oxidation

Coupling effect of reaction conditions on the catalytic activity of Cu–Mn composite oxide catalysts for toluene

Synergy of Mn and Ni Enhanced Catalytic Performance for Toluene Combustion over Ni-doped Α-Mno2 Catalysts

Unraveling the Effects of the Coordination Number of Mn over Α-Mno2 Catalysts for Toluene Oxidation

Heterointerface engineering regulating the energy-level configuration of α-MnO2/δ-MnO2 for enhancing toluene catalytic combustion performance

Tuning the crystallinity of the MnOx catalysts to promote toluene catalytic oxidation

Preparation of Nanosized Copper–Manganese Composite Oxides and Their Catalytic Performance in the Oxidation of Toluene

Efficient Α-Mno2 with (2 1 0) Facet Exposed for Catalytic Oxidation of Toluene at Low Temperature: A Combined In-Situ DRIFTS and Theoretical Investigation.

Insight into the catalytic performance and reaction routes for toluene total oxidation over facilely prepared Mn-Cu bimetallic oxide catalysts