Chemical mechanism development and reduction for combustion of NH3/H2/CH4 mixtures

Rui Li,Alexander A. Konnov,Guoqiang He,Fei Qin,Duo Zhang

DOI: https://doi.org/10.1016/j.fuel.2019.116059

IF: 7.4

2019-01-01

Fuel

Abstract:•Reduced mechanisms were obtained for NH3/H2/CH4 mixtures combustion.•The chemical models were validated over wide range conditions.•The reduced mechanism was tested numerically in non-premixed coflow jet flame.

What problem does this paper attempt to address?

Development of a reduced chemical mechanism for ammonia/ n -heptane blends

Bowen Wang,Shijun Dong,Zuozhou Jiang,Wenxue Gao,Zhongxuan Wang,Jianwei Li,Can Yang,Zhaowen Wang,Xiaobei Cheng

DOI: https://doi.org/10.1016/j.fuel.2022.127358

IF: 7.4

2023-01-06

Fuel

Abstract:A reduced chemical mechanism for ammonia/ n -heptane blends, which consists of 495 reactions and 74 species, is proposed in this study. This reduced mechanism is developed using the direct relation graph with error propagation (DRGEP) method based on the latest detailed kinetic mechanism of ammonia/ n -heptane blends, which includes the important interactive reactions between n -heptane and ammonia ( n -C 7 H 16 + NH 2 C 7 H 15 + NH 3 ). The reduced mechanism was first validated against experimental ignition delay times (IDTs) and laminar burning velocities (LBVs) for different ammonia/ n -heptane blends and can capture well these data. Moreover, both the detailed and reduced mechanisms were used to simulate the combustion and emission characteristics of a homogeneous charge compression ignition (HCCI) engine fueled by different ammonia/ n -heptane blends. The simulation results show that the predicted auto-ignition timings and peak pressure values of the reduced mechanism match reasonably well with those of the detailed mechanism for different ammonia/ n -heptane blends. Also, the predicted time-history profiles of the important pollutants, including NO, NO 2 , N 2 O and HCN, show reasonably good agreement between the detailed and reduced mechanisms, and the maximum discrepancy of the peak concentration is within a factor of two. The important reaction pathways of pollutant formations at HCCI engine conditions are discussed in detail. Furthermore, the current reduced mechanism is also used to simulate the combustion process of an ammonia/diesel dual-fuel engine. Overall, the engine combustion phasing, peak pressure, and heat release can be well simulated using the current mechanism, and the computational efficiency is acceptable.

energy & fuels,engineering, chemical
Reduced kinetics of NH 3 /n-heptane: Model analysis and a new small mechanism for engine applications

Vladimir A. Alekseev,Elna J.K. Nilsson

DOI: https://doi.org/10.1016/j.fuel.2024.131464

IF: 7.4

2024-03-18

Fuel

Abstract:A compact reduced mechanism covering a wide range of conditions is developed for use in simulations of NH 3 /n-heptane combustion in engines. Reduction targets were selected after reviewing available experimental studies of NH 3 combustion in engines. Ignition, flames and oxidation of NH 3 /n-heptane mixtures were targeted. Particularly, mixtures with very low molar percentage of n-heptane which are important for the applications were considered. They have been observed to have a distinct ignition behavior. Target quantities also included pollutants with a goal to account for two possible mechanisms of N 2 O formation in engines, discussed in literature. The reduced mechanism of this study was developed with ant colony reduction method. It consists of 57 species and 159 reactions, and its range of applicability is 10–100 atm pressure and 0–100 % NH 3 in the fuel mixture. The performance of the mechanism was found comparable to larger models from literature. Importance of carbon–nitrogen interactions, influence of key reactions in the NH 3 subset and effect of CO on N 2 O formation were analyzed and discussed in terms of the predictive ability of the reduced mechanism of the present study and those available from literature.

energy & fuels,engineering, chemical
Reduced Mechanism for Combustion of Ammonia and Natural Gas Mixtures

Aniket R. Khade,Vijaya D. Damodara,Daniel H. Chen

DOI: https://doi.org/10.3390/cleantechnol5020025

2023-04-12

Clean Technologies

Abstract:A fuel mixture of ammonia and natural gas as a low-carbon alternative for future power generation and transportation is an attractive option. In this work, a 50-species reduced mechanism, NH3NG, suitable for computational fluid dynamics simulations (CFD), is developed for ammonia–natural gas cofiring while addressing important emission issues, such as the formation of nitrogen oxides (NOx), soot, carbon monoxide, and unburnt methane/ammonia. The adoption of reduced mechanisms is imperative not only for saving computer storage and running time but also for numerical convergence for practical applications. The NH3NG reduced mechanism can predict soot emission because it includes soot precursor species. Further, it can handle heavier components in natural gas, such as ethane and propane. The absolute error is 5% for predicting NOx and CO emissions compared to the full Modified Konnov mechanism. Validation with key performance parameters (ignition delay, laminar flame speed, adiabatic temperature, and NOx and CO emissions) indicates that the predictions of the reduced mechanism NH3NG are in good agreement with published experimental data. The average prediction error of 13% for ignition delay is within typical experimental data uncertainties of 10–20%. The predicted adiabatic temperatures are within 1 °C. For laminar flame speed, the R2 between prediction and data is 0.985. NH3NG over-predicts NOx and CO emissions, similar to all other literature methods, but the NOx predictions are closer to the experimental data.
A simplified chemical kinetic model with a reaction mechanism based on a multidimensional average error iteration method for ammonia and ammonia/hydrogen combustion

Daiyao Yue,Chongkai Zhao,Rui Sun,Jieyu Jiang,Chunjie Sui,Xin Zhong,Bin Zhang

DOI: https://doi.org/10.1039/d4re00274a

IF: 5.2002

2024-09-14

Reaction Chemistry & Engineering

Abstract:Ammonia (NH 3 ) is emerging as a promising fuel due to its high energy density, high hydrogen content, and zero carbon emissions from combustion. The study of chemical kinetics in NH 3 combustion offers theoretical approaches to address its low reactivity and high nitrogen oxide (NO x ) emissions, especially in binary fuels with hydrogen (H 2 ), which have been shown to positively affect NH 3 combustion systems. However, existing NH 3 /H 2 models have various defects under different conditions. In this study, we develop a simplified NH 3 /H 2 chemical kinetics model that is comprehensively validated using a large amount of representative experimental literature data, including ignition delay time, laminar flame speeds, and species concentration profiles. The model is analyzed using an innovative multidimensional average error iteration method, ensuring that the overall average error remains within 5%. Subsequently, the model is simplified by removing unnecessary components and reaction steps through the direct relation graph with error propagation method, reducing computational consumption. The combustion results of the pure NH 3 and NH 3 /H 2 mixtures under most conditions are highly consistent with those of the new model. By conducting sensitivity and productivity analyses, we determined the key reactions controlling fuel reactivity under different H 2 ratios and the important interactions between intermediate products are described in detail. Additionally, the different reaction directions of NH 3 and the principle of NO x generation under high H 2 conditions are elucidated through these analyses and reaction pathway diagrams.

chemistry, multidisciplinary,engineering, chemical
Reactive molecular dynamics simulation and chemical kinetic modeling of ammonia/methane co-combustion

Ying Guo,Hui Shi,Hao Liu,Yongqian Xie,Yulei Guan

DOI: https://doi.org/10.1016/j.fuel.2023.129341

IF: 7.4

2023-08-03

Fuel

Abstract:Under the vision of "low carbonization", ammonia (NH 3 ), as a carbon-free hydrogen-rich fuel, blended with reactive additives, is an effective means to achieve low carbon emissions and reduce the consumption of traditional fossil fuels. In this work, the combustion behaviors of NH 3 and CH 4 , the distribution of main products and the formation and reduction characteristics of NO at different temperatures, CH 4 mixing ratios, and O 2 equivalence ratios are explored by means of reactive molecular dynamics simulation to reveal the microscopic mechanism of NH 3 /CH 4 co-combustion. The calculated results show that CH 4 takes the lead in producing H radicals which react with O 2 to generate OH radicals to promote the oxidation of NH 3 , and it is found that the co-combustion process of NH 3 /CH 4 in the radical chain transfer stage is similar to the respective pyrolysis and oxidation reactions of CH 4 and NH 3 . Accordingly, an optimized kinetic mechanism of NH 3 /CH 4 co-combustion is constructed based on the mechanisms proposed by Glarborg et al. and Okafor et al. by incorporating the NH 3 pyrolysis sub-mechanisms related to NH 2 , HNO, and N 2 H 2 and the skeletal mechanism of CH 4 oxidation. The optimized mechanisms of NH 3 /CH 4 co-combustion are found to improve the prediction of the ignition delay time (IDT) and laminar burning velocity (LBV) of NH 3 /CH 4 mixture under wide ranges of conditions compared to the original mechanisms of Glarborg et al. and Okafor et al. To decrease the computational cost of three-dimensional combustion numerical simulations, the skeletal mechanism models are established by simplification of the optimized mechanisms of NH 3 /CH 4 co-combustion using direct relation graph method with error propagation and sensitivity analysis, which can provide nearly the same estimates of IDTs and LBVs as the optimized mechanisms mentioned above.

energy & fuels,engineering, chemical
Development of a Skeletal Chemical Kinetic Mechanism for TRF/NH3 Combustion

Zechang Liu,Xu He,Guangyuan Feng,Chengyuan Zhao,Xiaoran Zhou,Zhi Wang,Qingchu Chen

DOI: https://doi.org/10.1016/j.fuel.2024.132171

IF: 7.4

2024-01-01

Fuel

Abstract:This study presents the development of a comprehensive skeletal chemical kinetic mechanism for the combustion of a toluene reference fuel/ammonia (TRF/NH3) mixture through the application of the decoupling method. The mechanism, intended for simulations involving a high number of dimensions, includes 100 species and 557 reactions. Its purpose is to enhance the utilization of NH3 in spark-ignition gasoline engines. The mechanism includes detail mechanisms for C0-C1 compounds, simplified mechanisms for C2-C3 compounds, and skeletal mechanisms for C4-Cn compounds. Furthermore, it encompasses cross-oxidation reactions between TRF fuels and NH3 that entail carbon-nitrogen interactions. The n-heptane/ammonia (nC7H16/NH3) sub-mechanism utilized in this study is adopted from the sub-mechanism developed by Wang et al. [1] using the direct relation graph error propagation (DREGP) method. Additionally, the mechanisms involving toluene/ammonia (C7H8/NH3) and isooctane/ammonia (iC8H18/NH3) incorporate decoupling mechanisms previously developed by Chang et al. [2].To improve the representation of negative temperature coefficient (NTC) behavior at lower temperatures, many scholars augmented their proposed mechanism by including two significant low-temperature reaction pathways: chain termination reaction RO2 = alkene + HO2 and chain branching reaction QOOH = epoxide + OH. This modification aimed to improve the NTC behavior in the mechanism, especially under moderated low temperatures. The mechanism was ultimately validated using many experimental datas, which included laminar flame speed (LFS), ignition delay time (IDT), and concentrations of species in mixtures such as iC8H18/NH3, nC7H16/ NH3, C7H8/NH3, TRF, and TRF/NH3 under different initial temperature, pressure, ammonia mole fraction (XNH3), and equivalence ratio (phi). The validation process included a comparison with the detailed mechanisms (Liu mechanism) established in the authors' previous study [3]. The results suggested that the existing mechanism demonstrates a high level of effectiveness in predicting species concentrations, LFSs, and IDTs, as reported in the literature, and performs comparably to the detailed Liu mechanism.
Experimental and kinetic study on the laminar burning velocities of NH3 mixing with CH3OH and C2H5OH in premixed flames

Zhihua Wang,Xinlu Han,Yong He,Runfan Zhu,Yanqun Zhu,Zhijun Zhou,Kefa Cen

DOI: https://doi.org/10.1016/j.combustflame.2021.02.038

IF: 4.4

2021-07-01

Combustion and Flame

Abstract:Ammonia (NH3) is a promising carbon-free alternative fuel, and blending NH3 with other more active fuels can enhance the low burning rate of pure NH3 flames, which makes it more compatible with existing combustors. There are laminar burning velocity data of NH3+H2, NH3+CO/syngas, and NH3+CH4 flames in literature, however, blending NH3 with the oxygenated alternative fuel alcohols have not yet been checked. In the present work, the laminar burning velocities of NH3+CH3OH/air and NH3+C2H5OH/air flames were measured using the heat flux method at 1 atm with varied equivalence ratios and mixing ratios. Measurements were carried out at 298 K and elevated temperatures until 448 K unburnt temperatures, in order to check the data consistency via the temperature coefficient α in S L S L 0 = ( T u T u 0 ) α . A new updated kinetic mechanism, based on our previous mechanism named CEU-NH3, was proposed and validated based on the present and published experimental data for laminar burning velocity, ignition delay times and species profiles. This mechanism contains 91 species and 444 reactions, which is small in size and thus advantageous to be used in the modeling of complex combustion fields. By numerical analyses using the CEU-NH3 and the detailed Konnov mechanisms, the interactions between C- and N- containing species are found to be insignificant for the laminar burning velocities of the various NH3 blending mixtures.

energy & fuels,engineering, chemical, mechanical,thermodynamics, multidisciplinary
Development of a reduced combustion model for ammonia/hydrogen combustion

Jiaxin Ren,Wenyu Li,Chun Zou

DOI: https://doi.org/10.1016/j.fuel.2023.129389

IF: 7.4

2023-08-10

Fuel

Abstract:Ammonia/hydrogen receives increasing interest as a carbon-free fuel in novel combustion techniques. Simulation aided design often requires coupling of flow field and chemical kinetics, whose feasibility relies essentially on an affordable (reduced) reaction model. However, existing ammonia/hydrogen reduced models are scarce and cannot reasonably reproduce available experimental data over a comprehensive set of conditions. Hence, a reduced ammonia/hydrogen model was developed in the present work using a combined method: the directed relation graph with error propagation method was applied first followed by a contribution to species production/consumption screening method. The model reduction method substantially reduces the size of the model, from 37 species and 237 reactions to 25 species and 108 reactions. The reduced model was compared to available reduced models over a comprehensive set of experimental data, including ignition delay time measurements in shock-tube and rapid compression machine, laminar flame speed measurements and species profile data measured in jet stirred reactor and burner stabilized flame. The obtained model maintains comparable prediction accuracy compared to the detailed model and is superior to the other reduced models.

energy & fuels,engineering, chemical
Experimental and Kinetic Modeling Study of Laminar Burning Velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air Premixed Flames

Xinlu Han,Zhihua Wang,Mario Costa,Zhiwei Sun,Yong He,Kefa Cen

DOI: https://doi.org/10.1016/j.combustflame.2019.05.003

IF: 4.4

2019-01-01

Combustion and Flame

Abstract:Ammonia (NH3) is a promising energy carrier to store and transport renewable hydrogen (H2) that can be generated using, e.g., wind and solar energy. Direct combustion of NH3 is one of the possible methods to utilize the energy by the end users. To understand the combustion characteristics of NH3 as a fuel, the laminar burning velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air premixed flames were investigated experimentally using the heat flux method. Measurements are reported for a wide range of equivalence ratios and blending ratios. Kinetic modeling was also performed using available chemical kinetic mechanisms, namely the GRI-Mech 3.0, the Okafor et al. and the San Diego mechanisms. The experimental results for NH3/air flames agree well with the literature data and it is found that blending NH3 with H2 is the most effective manner to increase the burning velocity of NH3 based fuel mixtures. None of the kinetic mechanisms used can accurately predict most of the measured data. Sensitivity and reaction path analyses indicate that the oxidation of NH3 blended with the additive fuels considered can be understood as the parallel oxidation processes of the individual fuels, and that the source of discrepancy between the experimental and modeling results is related to the inaccuracy of the rate parameters of the N-containing reactions. In this regard, the present detailed and reliable experimental data is of special value for model development and validation.
Reduced Kinetic Mechanisms for the Simulation of Detonation in H2-N2O-Ar Mixtures

D. Davidenko,R. Mével,G. Dupré

2009-01-01

Abstract:The purpose of the present study is to obtain reduced kinetic mechanisms specifically for the detonation simulation in lean, stoichiometric and rich H2-N2O-Ar mixtures. A recently developed detailed mechanism and a constant- pressure reactor model are chosen to perform the reduction. A method of automatic reduction is used to eliminate redundant chemical reactions while respecting error limitations for several practically important characteristics of the combustion process. Further reduction is made by globalizing a part of the reduced mechanism. Reduced mechanisms are finally validated in ZND detonations simulations.
Experimental and chemical kinetic study for the combustion of ammonia-hydrogen mixtures

Biao Liu,Zunhua Zhang,Shuangcheng Yang,Fulin Yu,Belal Y. Belal,Gesheng Li

DOI: https://doi.org/10.1016/j.fuel.2024.131850

IF: 7.4

2024-05-19

Fuel

Abstract:Chemical kinetic model development and validation against new combustion data for ammonia and ammonia blended hydrogen are still requirements. New ignition delay times of NH 3 and NH 3 /H 2 were experimentally measured using a high-pressure shock tube over a temperature range of 1500–1900 K, at pressures ranging from 5 to 30 atm, and at equivalence ratios between 0.5 and 2.0, with hydrogen blended ratios ranging from 0 % to 50 %. Additionally, new experiments were designed to explore extinction limits of NH 3 /H 2 ( Ra H2 = 0.25–0.75) using a counterflow burner under normal temperature and pressure (300 K, 1 atm), as well as laminar burning velocities using a high-pressure constant volume combustion chamber. The resulting experimental data, previously published LBVs, and oxidation data were employed for comprehensive validation against the improved NH 3 /H 2 reaction kinetic model (referred to as the WUT model), consisting of 35 species and 239 reactions. The WUT model was assembled from the literature models and mainly updated based on the Gotama model, and four reaction rate constants were adjusted through a critical evaluation. To evaluate the updated WUT model, mean absolute errors for predicting combustion characteristics of NH 3 and NH 3 /H 2 were calculated. The calculated results demonstrate that mean absolute errors for IDTs, LBVs, and extinction limits are all lower than 12 %. The WUT model can also reasonably predict the profiles of NH 3 and NH 3 /H 2 oxidation species in the JSR. Experimental results indicate that an increase in Ra H2 leads to exponential decreases in IDTs, and the extinction limits of ammonia are broadened, attributed to enhanced ammonia reactivity promoted by hydrogen. Kinetic analysis shows that the conversions of NO 2 to NO and N 2 O to N 2 are both over 90 % through one-step pathways. The removal of NO is mainly reaction with Ṅ H 2 and N ̈ H via multiple steps, this process plays a crucial role in De-NO x process for NH 3 /H 2 combustion. Under hydrogen addition conditions, the process of NH 3 → Ṅ H 2 was promoted, and the H Ȯ 2 and Ṅ H 2 radicals were accumulated rapidly before ignition.

energy & fuels,engineering, chemical
Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models

Hrvoje Mikulčić,Jakov Baleta,Xuebin Wang,Jin Wang,Fengsheng Qi,Fan Wang

DOI: https://doi.org/10.1016/j.ijhydene.2021.01.109

IF: 7.2

2021-07-01

International Journal of Hydrogen Energy

Abstract:<p>Ammonia appears to be a potential alternative fuel that can be used as a hydrogen vector and fuel for gas turbines and internal combustion engines. Chemical mechanisms of ammonia combustion are important for the development of ammonia combustion systems, but also as a mean of investigation of harmful NOx emissions, so they can be minimized. Despite of large body of experimental and modelling work on the topic of ammonia combustion, there is still need for additional investigation of combustion kinetics.</p><p>The object of this work is further numerical study of ammonia combustion chemistry under conditions resembling industrial ones. After literature review, three mechanisms of ammonia combustion that also include carbon chemistry are used for simulation of experimental premixed swirl burner with the aim of evaluating their performance. San Diego mechanism, that was also the most detailed one, proved to be the best in terms of emissions, but neither one of the models was able to accurately reproduce CO emission after equivalence ratio went beyond 0.81. It was also observed that oxygen is excessively consumed. This study contributes to the current knowledge by providing new insights in ammonia burning conditions closely resembling those in industrial applications, and consequently is expected that insights obtained will help in the design of real industrial burning systems.</p>

energy & fuels,electrochemistry,chemistry, physical
Chemistry of Ammonia/Hydrogen and Ammonia/n-Heptane Fuels: Reaction Mechanism Updating and Chemical Kinetic Analysis

Qihang Chen,Lin Lyu,Yongzhong Huang,He Yang,Junjie Liang,Neng Zhu

DOI: https://doi.org/10.3390/en17235956

IF: 3.2

2024-11-28

Energies

Abstract:For spark ignition and compression ignition ammonia engines, a typical approach to ensure stable operation involves the blending of ammonia with hydrogen and diesel, respectively. For the ammonia/hydrogen fuel, in this study a comprehensive comparison was conducted firstly for the differences among existing chemical mechanisms according to the experimental data of ignition, oxidation, and flame propagation. The result indicates that the current reaction mechanisms for ammonia/hydrogen fuel exhibit high prediction accuracy only within limited condition ranges. Subsequently, considering the completeness of combustion reaction pathways for ammonia/hydrogen fuel, a chemical mechanism of ammonia and ammonia/hydrogen fuel was developed and optimized in this study, and the comprehensive validation demonstrates the accuracy of the developed mechanism. On this basis, the ammonia mechanism was integrated with the detailed n-heptane mechanism to derive a mechanism for ammonia/diesel fuel that includes 1351 species and 6227 reactions. The good performance of this mechanism was demonstrated in terms of the experimental data of ignition and oxidation. In addition, the ignition sensitivity and reaction pathways of ammonia/hydrogen fuel were investigated based on the constructed mechanism, and the significance of C3–C7/N reactions was also analyzed for the ammonia/diesel fuel ignition process.

energy & fuels
RANS simulations on combustion and emission characteristics of a premixed NH3/H2 swirling flame with reduced chemical kinetic model

SUN Yuze,CAI Tao,Mohammad SHAHSAVARI,SUN Dakun,SUN Xiaofeng,ZHAO Dan,WANG Bing,Yuze SUN,Tao CAI,Dakun SUN,Xiaofeng SUN,Dan ZHAO,Bing WANG

DOI: https://doi.org/10.1016/j.cja.2020.11.017

IF: 5.7

2021-12-01

Chinese Journal of Aeronautics

Abstract:Ammonia (NH3) is considered as a potential alternative carbon free fuel to reduce greenhouse gas emission to meet the increasingly stringent emission requirements. Co-burning NH3 and H2 is an effective way to overcome ammonia's relative low burning velocity. In this work, 3D Reynolds Averaged Navier-Stokes (RANS) numerical simulations are conducted on a premixed NH3/H2 swirling flame with reduced chemical kinetic mechanism. The effects of (A) overall equivalence ratio Φ and (B) hydrogen blended molar fraction XH2 on combustion and emission characteristics are examined. The present results show that when 100%NH3-0%H2-air are burnt, the NO emission and unburned NH3 of at the swirling combustor outlet has the opposite varying trends. With the increase of Φ, NO emission is found to be decreased, while the unburnt ammonia emission is increased. NH2 → HNO, NH → HNO and HNO → NO sub-paths are found to play a critical role in NO formation. Normalized reaction rate of all these three sub-paths is shown to be decreased with increased Φ. Hydrogen addition is shown to significantly increase the laminar burning velocity of the mixed fuel. However, adding H2 does not affect the critical equivalence ratio corresponding to the maximum burning velocity. The emission trend of NO and unburnt NH3 with increased Φ is unchanged by blending H2. NO emission with increased XH2 is increased slightly less at a larger Φ than that at a smaller Φ. In addition, reaction rates of NH2 → HNO and HNO → NO sub-paths are decreased with increased XH2, when Φ is larger. Under all tested cases, blending H2 with NH3 reduces the unburned NH3 emission, especially for rich combustion conditions. In summary, the present work provides research finding on supporting applying ammonia with hydrogen blended in low-emission gas turbine engines.

engineering, aerospace
RANS simulations on combustion and emission characteristics of a premixed NH3/H-2 swirling flame with reduced chemical kinetic model

Yuze Sun,Tao Cai,Mohammad Shahsavari,Dakun Sun,Xiaofeng Sun,Dan Zhao,Bing Wang

DOI: https://doi.org/10.1016/j.cja.2020.11.017

IF: 5.7

2021-01-01

Chinese Journal of Aeronautics

Abstract:Ammonia (NH3) is considered as a potential alternative carbon free fuel to reduce greenhouse gas emission to meet the increasingly stringent emission requirements. Co-burning NH3 and H-2 is an effective way to overcome ammonia's relative low burning velocity. In this work, 3D Reynolds Averaged Navier-Stokes (RANS) numerical simulations are conducted on a premixed NH3/H-2 swirling flame with reduced chemical kinetic mechanism. The effects of (A) overall equivalence ratio Phi and (B) hydrogen blended molar fraction X-H2 on combustion and emission characteristics are examined. The present results show that when 100%NH3-0%H-2-air are burnt, the NO emission and unburned NH3 of at the swirling combustor outlet has the opposite varying trends. With the increase of Phi, NO emission is found to be decreased, while the unburnt ammonia emission is increased. NH2 -> HNO, NH -> HNO and HNO -> NO sub-paths are found to play a critical role in NO formation. Normalized reaction rate of all these three sub-paths is shown to be decreased with increased Phi. Hydrogen addition is shown to significantly increase the laminar burning velocity of the mixed fuel. However, adding H-2 does not affect the critical equivalence ratio corresponding to the maximum burning velocity. The emission trend of NO and unburnt NH3 with increased Phi is unchanged by blending H-2. NO emission with increased X-H2 is increased slightly less at a larger than that at a smaller Phi. In addition, reaction rates of NH2 -> HNO and HNO -> NO sub-paths are decreased with increased X-H2, when Phi is larger. Under all tested cases, blending H-2 with NH3 reduces the unburned NH3 emission, especially for rich combustion conditions. In summary, the present work provides research finding on supporting applying ammonia with hydrogen blended in low-emission gas turbine engines. (C) 2021 Chinese Society of Aeronautics and Astronautics. Production and hosting by Elsevier Ltd.
Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

Juan Ou,Yuchao Yan,Ruomiao Yang,Zhentao Liu,Jinlong Liu

DOI: https://doi.org/10.1115/icef2024-140869

2024-01-01

Abstract:Abstract Ammonia is a promising carbon-neutral fuel for internal combustion engines. However, its widespread application requires accurate ammonia kinetic models for numerical simulations used in engine development. Current development of ammonia kinetics mainly focuses on predicting fundamental combustion parameters such as ignition delay and laminar flame speed. Yet, significant discrepancies remain among different kinetics in predicting nitrogen-based pollutants (such as NOx and N2O). To improve the immature ammonia kinetics, especially for nitrogen-based pollutant chemistry, this study applies the Reaction Mechanism Generator (RMG) tool to enhance existing kinetics from the literature. Additionally, the kinetics is further optimized by incorporating advanced theoretical calculations of key reaction rates from the latest literature. The results show that the RMG-derived models excel in predicting species concentrations, ignition delay times, and laminar flame speeds. Moreover, the RMG-improved kinetics significantly enhances model robustness and applicability by automatically generating and expanding chemical reaction networks and iteratively adding new reactions and species that are essential according to the flux analysis. Further, kinetic analysis reveals the presence of an important species, HN2O, missing in the chemical mechanism from existing literature, which shows high sensitivity in the ammonia oxidation pathway. Overall, these findings highlight the need for more fundamental studies to improve immature ammonia oxidation kinetics by identifying new oxidation pathways and key species under a wider range of conditions representative of engine in-cylinder conditions, which is vital for predicting ammonia engine nitrogen-based emissions and finding strategies to control them.
Coupled Reaction Mechanism Reduction for the Hetero-/Homogeneous Combustion of Syngas over Platinum

Ran Sui,Wenkai Liang,John Mantzaras,Chung K. Law

DOI: https://doi.org/10.1016/j.combustflame.2019.12.020

IF: 4.4

2019-01-01

Combustion and Flame

Abstract:Coupled reduced mechanisms were developed for the hetero-/homogeneous combustion of fuel-lean and fuel-rich H2/CO/O2/N2 mixtures in a Pt-coated planar channel, using a method based on the Directed Relation Graph (DRG) and for a wide range of operating conditions for which detailed measurements are available. It is demonstrated that catalytic and gas-phase reaction mechanisms can be reduced together for all the fuel-lean cases. On the other hand, when joint reduction is performed for low-pressure fuel-rich cases (using a strict threshold value to capture the relatively weak, yet still important coupling between the catalytic and gas-phase reaction pathways) the result is a less efficient reduction process. For the high-pressure fuel-rich cases the catalytic-gaseous chemical coupling is weak enough to be neglected such that the reduction can be conducted separately for higher reduction efficiency. The reduced mechanisms reproduced well the major gaseous species concentrations, gas temperatures and homogeneous ignition distances obtained with the detailed mechanisms, thus demonstrating the capacity of the applied method in reducing catalytic/gas-phase reaction mechanisms. In addition, it is shown that for fuel-lean stoichiometries the reduction could provide a rapid indication if gas-phase combustion is ignited, without the need of full simulations. The reduced mechanisms are expected to facilitate large-scale simulations, with fidelity, for the design and thermal management of practical catalytic combustion systems.
Modeling and chemical kinetic analysis of methanol and reformed gas (H 2 /CO 2 ) blending with ammonia under lean-burn condition

Xiangyu Meng,Lizi Liu,Meichao Qin,Wenchao Zhu,Wuqiang Long,Mingshu Bi

DOI: https://doi.org/10.1016/j.ijhydene.2024.01.150

IF: 7.2

2024-01-23

International Journal of Hydrogen Energy

Abstract:Hydrogen can be easily produced by methanol steam reforming. This work aims to investigate the effects of methanol addition and its reformed gas of H 2 /CO 2 on ammonia combustion under lean-burn operation. A newly-developed reaction mechanism for NH 3 , H 2 , CH 3 OH, CO and their blends was established based on the highly-precise validations of laminar burning velocity (LBV), nitrogen monoxide (NO) and ignition delay time (IDT). The premixed flame analysis showed that methanol blends and reforming with hydrogen addition can greatly enhance the combustion rate, resulted from the chemical effect. The equivalence ratio (ER) can be extended to 0.45 for a methanol blending ratio of 60 % and reforming ratio of 90 % (M60R90) to achieve the similar level of LBV at pure ammonia at an ER of 1.0 under ambient condition. The methanol blends and reforming lead to the increase of NO, while the lean-burn operation can help to reduce the NO emission.

energy & fuels,electrochemistry,chemistry, physical
An augmented reduced mechanism for methane oxidation with comprehensive global parametric validation

C.J. Sung,C.K. Law,J.-Y. Chen

DOI: https://doi.org/10.1016/S0082-0784(98)80416-5

1998-01-01

Symposium (International) on Combustion

Abstract:Using a computer algorithm for automatic generation of reduced chemistry, an augmented reduced mechanism, consisting of 16 species and 12 lumped reaction steps, has been developed for methane oxidation from GRI-Mech 1.2. Because the present mechanism consists of a larger number of non-steady-state intermediates than the conventional four- or five-step reduced mechanisms, it exhibits good to excellent performance in predicting a wide range of combustion phenomena under extensive thermodynamical parametric variations. Specifically, the phenomena tested include perfectly stirred reactor responses, autoignition and shock-tube ignition delay times, laminar flame propagation speeds, and ignition-extinction limits of counterflowing systems, whereas the thermodynamical parametric variations include those of temperature, pressure, and composition. It is recognized that, with the anticipated increase in computing capability in the foreseeable future, use of the present four- to five-step mechanisms will be unnecessarily limiting. Consequently, it is suggested that efforts should be expended toward development of augmented reduced mechanisms for more comprehensive description of combustion phenomena and for their potential implementation in the computational simulation of complex flows and systems.
Reduced Mechanism for Hybrid NOx Control Process

Yu Lv,Zhihua Wang,Junhu Zhou,Kefa Cen

DOI: https://doi.org/10.1021/ef900666k

IF: 4.6541

2009-01-01

Energy & Fuels

Abstract:To accurately predict hybrid NOx control process, a joint mechanism is initially developed based on the NOxOUT mechanism of Rota et al. and the angstrom A scheme of Zebetta et al. Directed, related graphs and rate-of-product were employed to make the joint mechanism simplified, Finally leading to a scheme including 44 species and 150 elementary reactions. Validation of the joint mechanism is strictly conducted at selective noncatalytic reduction, reburning, and hybrid NOx reducing conditions, by comparing the predicted results of the joint mechanism with reported experimental data. Then in order to handle CFD simulation of practical problems, a reduced mechanism, including 18 global steps and 22 species, was accordingly established. The testing of the reduced mechanism was carried out by comparing its predicted results with those of the joint one. Perfect coherency between them is observed at different operating conditions, and the deviation is negligible compared with the general measuring uncertainty. The joint mechanism can serve as the main chemical scheme in simple flow computations and the reduced one is expected to be directly integrated to CFD modeling of industrial equipments with complex flow and geometry configuration.

Chemical mechanism development and reduction for combustion of NH3/H2/CH4 mixtures

Development of a reduced chemical mechanism for ammonia/ n -heptane blends

Reduced kinetics of NH 3 /n-heptane: Model analysis and a new small mechanism for engine applications

Reduced Mechanism for Combustion of Ammonia and Natural Gas Mixtures

A simplified chemical kinetic model with a reaction mechanism based on a multidimensional average error iteration method for ammonia and ammonia/hydrogen combustion

Reactive molecular dynamics simulation and chemical kinetic modeling of ammonia/methane co-combustion

Development of a Skeletal Chemical Kinetic Mechanism for TRF/NH3 Combustion

Experimental and kinetic study on the laminar burning velocities of NH3 mixing with CH3OH and C2H5OH in premixed flames

Development of a reduced combustion model for ammonia/hydrogen combustion

Experimental and Kinetic Modeling Study of Laminar Burning Velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air Premixed Flames

Reduced Kinetic Mechanisms for the Simulation of Detonation in H2-N2O-Ar Mixtures

Experimental and chemical kinetic study for the combustion of ammonia-hydrogen mixtures

Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models

Chemistry of Ammonia/Hydrogen and Ammonia/n-Heptane Fuels: Reaction Mechanism Updating and Chemical Kinetic Analysis

RANS simulations on combustion and emission characteristics of a premixed NH3/H2 swirling flame with reduced chemical kinetic model

RANS simulations on combustion and emission characteristics of a premixed NH3/H-2 swirling flame with reduced chemical kinetic model

Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

Coupled Reaction Mechanism Reduction for the Hetero-/Homogeneous Combustion of Syngas over Platinum

Modeling and chemical kinetic analysis of methanol and reformed gas (H 2 /CO 2 ) blending with ammonia under lean-burn condition

An augmented reduced mechanism for methane oxidation with comprehensive global parametric validation

Reduced Mechanism for Hybrid NOx Control Process