Abstract:This paper presents an AlN-based piezoelectric micromachined ultrasonic transducer (PMUT) with a double-beam suspended structure. In order to obtain greater deflection displacement and output sound pressure compared to standard systems, a suspended structure is proposed, achieved by utilizing double-sided deep reactive ion etching of the silicon substrate. This structure is capable of greatly reducing the tensile stress caused by deflection on the membrane edge, thereby improving the piezoelectric micromachined ultrasound transducer performance. Simulations are performed using the finite element method and COMSOL software, with results demonstrating that the suspension structure exhibits a lower resonant frequency and a larger membrane deflection displacement than other methods, implying higher penetration and acoustic energy levels. Thus, the sound pressure is improved by changing the PMUT structure. Moreover, a PMUT with a double-beam is fabricated, and the impedance diagram is determined with an impedance analyzer. The resonant frequency of the transducer was 31.88 kHz, while the sound wave received by the standard lead zirconate titanate (PZT) ultrasonic transducer was converted to a voltage of 277.5 mV. In comparison, the proposed PMUT demonstrates an improved acoustic emission performance. In addition, the electromechanical coupling coefficient of the suspended PMUT is observed to be approximately 3.08%, which is significantly better than that of a fully clamped PMUT. This demonstrates the strong electromechanical conversion performance of the proposed PMUT. Results from the transmission and reception air experiments prove that the proposed double-beam PMUT can potentially be used for ranging and wireless energy transmission applications.

Study Of The Properties Of Ain Pmut Used As A Wireless Power Receiver

Study of the Properties of AlN PMUT used as a Wireless Power Receiver

An Aln-Based Piezoelectric Micro-Machined Ultrasonic Transducer (Pmut) Array

An AlScN Piezoelectric Micromechanical Ultrasonic Transducer-Based Power-Harvesting Device for Wireless Power Transmission

An ultrasound-induced wireless power supply based on AlN piezoelectric micromachined ultrasonic transducers

MEMS-based Ultrasonic Transducer As the Receiver for Wireless Power Supply of the Implantable Microdevices

High Voltage Excitation And Nonlinear Transmission Of A 16 Mhz Aln-Based Piezoelectric Micro-Machined Ultrasonic Transducer

An Aln-Based Piezoelectric Micromachined Ultrasonic Transducer with a Double-Beam Suspended Structure

Design and Fabrication of High-Frequency Piezoelectric Micromachined Ultrasonic Transducer Based on an AlN Thin Film

Design and Fabrication of High-Performance Piezoelectric Micromachined Ultrasonic Transducers Based on Aluminum Nitride Thin Films

Design, Fabrication, Characterization, and Simulation of AlN-Based Piezoelectric Micromachined Ultrasonic Transducer for Sonar Imaging Applications

Modeling and Measurement of an Ultrasound Power Delivery System for Charging Implantable Devices Using an AlN-Based pMUT as Receiver

Fabrication of a piezoelectric micromachined ultrasonic transducer (PMUT) with dual heterogeneous piezoelectric thin film stacking

Fabrication and Characterization of AlN Based Piezoelectric Micromachined Ultrasonic Transducer for Contact Sensing

Analysis and Design of a PMUT-based transducer for Powering Brain Implants

Design, Fabrication, Characterization and Simulation of AlN PMUT for Sonar Imaging Applications

An Experimental Study of the Acoustic Field of a Single-Cell Piezoelectric Micromachined Ultrasound Transducer (PMUT)

Effect of Shared Cavity on Electromechanical Performance of Piezoelectric Based Micro-machined Ultrasonic Transducer Array.

Highly Sensitive Piezoelectric Micromachined Ultrasonic Transducer (pmut) Operated in Air

Pb(Zr50Ti50)O3-based Piezoelectric Micromachined Ultrasonic Transducers for High Acoustic Transmission and Reception

Fabrication Process and Performance Analysis of AlN Based Piezoelectric Micromachined Ultrasonic Transducer with a Suspended Structure.