Abstract:The thermophysical properties of Ni-based single-crystal superalloys were investigated using first-principles calculations combined with the quasiharmonic approximation. The effect of alloying elements X (X = Re, Ru, Ta, W, Mo, Cr, and Co) on the thermophysical properties of the γ-Ni and γ'-Ni3Al phases was investigated. The calculations showed that alloying can effectively adjust the lattice misfit between the two phases, and Cr can suppress lattice misfit and may improve the creep resistance of alloys. At 0 K, doping with refractory elements leads to tetragonal shear softening of the γ-Ni phase. For γ-Ni, Re, Ru, Cr, and Co slightly increase c44, while Mo, W, and Ta decrease c44. Importantly, high-temperature relative hardening was found to occur close to the service temperature of the superalloy, at which Ru and Cr increase c' and Mo and W increase c44 of γ-Ni. For the γ'-Ni3Al phase, all of the alloying elements except Co considerably increase c' and c44. Re and W at the Al site were found to most effectively harden the γ'-Ni3Al phase. The thermophysical and elastic properties were fully understood by analysis of the electronic structures and phonon spectra. It was found that the electronic density of states (DOS) can account for elastic hardening due to alloying. The phonon spectra along with electronic DOS analysis showed that alloying not only strengthens the first nearest neighbor Ni-X bond through additional d-d hybridization, but it is also important for stiffening the second nearest neighbor Al-X bonding through p-band filling.

Elastic Properties of Co-base Alloys: an Ab Initio Study

Effect of Alloying Elements on Lattice Misfit and Elasticities of Ni-based Single Crystal Superalloys by First-Principle Calculations

Single-Crystal Elastic Constants of Ferromagnetic Bcc Fe-Based Random Alloys from First-Principles Theory

Elastic Parameters Of Paramagnetic Iron-Based Alloys From First-Principles Calculations

Theoretical elastic moduli of ferromagnetic bcc Fe alloys.

Elastic properties of AlxCrMnFeCoNi (0 ≤ x ≤ 5) high-entropy alloys from ab initio theory

Ab Initio Determination of the Elastic Properties of Ferromagnetic Body-Centered Cubic Fe-Mn-Al Alloys

Magneto-chemical Effects in the Elastic Properties of Co3 Al-based Compounds

Elastic Parameters of Paramagnetic Fe–20Cr–20Ni-Based Alloys: A First-Principles Study

Influence of Al Content on the Elastic Properties and Various Anisotropies of AlxC Rfeconicu High Entropy Alloys Base on the First-Principles Calculation

Ab Initio Study of the Elastic Properties of Body-Centered Cubic Ti-Mo-based Alloys

Ab Initio Calculations Of Elastic Properties Of Bcc Fe-Mg And Fe-Cr Random Alloys

The Structural, Elastic And Thermodynamic Properties Of Intermetallic Phases In Mg-Sn-Si-Ca(Sr) Alloys: A First-Principles Study

Alloying effect on the ideal tensile strength of ferromagnetic and paramagnetic bcc iron

First-principles study of elastic properties of Cr-Al-N

Effects of Al and La elements on mechanical properties of CoNiFe0.6Cr0.6 high-entropy alloys: a first-principles study

Assessing Elastic Property and Solid-Solution Strengthening of Binary Ni–Co, Ni–Cr, and Ternary Ni–Co–Cr Alloys from First-Principles Theory

FCC-to-HCP Phase Transformation in CoCrNix Medium-Entropy Alloys

Composition Effect on Elastic Properties of Model NiCo-based Superalloys

Elastic Anomalies in Fe–Cr Alloys

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys