Abstract:The effects of Al on microstructure and mechanical properties of AlxCoCrFeNi (x=0.1, 0.75 and 1.5) high-entropy alloys were systematically studied by using various characterization methods. It was found that the crystalline structure of AlxCoCrFeNi high-entropy alloy varies markedly with Al content, which changes from the initial single face-centered cubic (fcc) to fcc plus ordered body-centered cubic (bcc) structure (B2) and then to a duplex bcc structure (A2+B2) as the Al content is increased. The chemical composition analysis reveals that Al primarily partitions to B2 phase, suggesting Al is a stabilizer of B2 structure. With increasing Al content, more Ni and Al partition to the B2 phase due to the very negative mixing enthalpy of Ni and Al, and another phase enriched in Cr and Fe transforms from fcc to disordered bcc. Nano indentation measurements show that the hardness of AlxCoCrFeNi high-entropy alloy increases with Al content, accompanied by the decrease of ductility. The stability of single-phase solid solution in AlxCoCrFeNi HEAs is deduced from various criteria. Combined with the experiment results of other similar HEA systems, such as AlxCoCrFeNiCu, the effects of Al addition on the microstructure of AlxCoCrFeNi HEAs are discussed based on the Gibbs free energy of all competing phases and the fundamental properties of constituent elements. The aim of current study is to provide experimental evidence to establish a correlation between the microstructure and mechanical properties to search for high-entropy alloys with higher performances.

Influence of Al Content on the Elastic Properties and Various Anisotropies of AlxC Rfeconicu High Entropy Alloys Base on the First-Principles Calculation

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Effects of Al and La elements on mechanical properties of CoNiFe0.6Cr0.6 high-entropy alloys: a first-principles study

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Elastic properties of AlxCrMnFeCoNi (0 ≤ x ≤ 5) high-entropy alloys from ab initio theory

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effect of Al Content on Microstructure and Mechanical Properties of the (Feconiv)100-Xalx High-Entropy Alloys

Effect of Al Addition on Microstructures and Mechanical Properties of AlxCrFeNi2.5Mo High Entropy Alloys

Effects of Al Addition on Structural Evolution and Tensile Properties of the FeCoNiCrMn High-Entropy Alloy System

Effect of Al content on microstructure and wear properties of FeCrNiMnAlx high-entropy alloys

The Microstructures and Properties Changes Induced by Al:Co Ratios of the Al CrCo FeNi High Entropy Alloys

Effects of Al Addition on Microstructure and Mechanical Properties of Alxcocrfeni High-Entropy Alloy

Mechanical Properties of AlCrFeCuNi High Entropy Alloy: A Molecular Dynamics Study

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Effects of Al Addition on the Microstructure and Mechanical Property of AlxCoCrFeNi High-Entropy Alloys

Microstructure Evolution and Compressive Property Variation of CoCrFeNiAlx High Entropy Alloys Produced by Directional Solidification

Tensile mechanical properties of CoCrFeNiTiAl high entropy alloy via molecular dynamics simulations

Plasticity Improvement in a Co-Rich Co<sub>40</sub>Fe<sub>25</sub>Cr<sub>20</sub>Ni<sub>15</sub> High-Entropy Alloy via Al Alloying

Microstructure and tensile properties of Co-free Fe4CrNi(AlTi) high-entropy alloys

First-principles calculation of phase transitions and mechanical properties of (CoCrNi)100−xAlx (0 ≤ x ≤ 28 at. %) high-entropy alloys

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing