Abstract:Autogenous cancellous bone graft is used to heal critical-size segmental long bone defects and defects in the maxillofacial skeleton. Harvesting of bone graft is traumatic, causes morbidity of the donor site, and often results in complications. Thus, there is a need for new biologically functional bone graft substitutes that, instead of autogenous bone graft, could be used to facilitate bone regeneration in critical-size defects. Porous biodegradable elastomeric polyurethane scaffolds combined with the patient's own bone marrow could potentially be such bone substitutes. The elastomeric bone substitute prevents shear forces at the interface between bone and rigid, e.g., ceramic bone substitutes and establishes an intimate contact with the native bone ends, thus facilitating the proliferation of osteogenic cells and bone regeneration. Crosslinked 3D biodegradable polyurethane scaffolds (foams) with controlled hydrophilicity for bone graft substitutes were synthesized from biocompatible reactants. The scaffolds had hydrophilic-to-hydrophobic content ratios of 70:30, 50:50, and 30:70. The reactants used were hexamethylene diisocyanate, poly(ethylene oxide) diol (MW = 600) (hydrophilic component), and poly(epsilon-caprolactone) diol (M(w) = 2000), amine-based polyol (M(w) = 515) or sucrose-based polyol (M(w) = 445) (hydrophobic component), water as the chain extender and foaming agent, and stannous octoate, dibutyltin dilaurate, ferric acetylacetonate, and zinc octoate as catalysts. Citric acid was used as a calcium complexing agent, calcium carbonate, glycerol phosphate calcium salt, and hydroxyapatite were used as inorganic fillers, and lecithin or solutions of vitamin D(3) were used as surfactants. The scaffolds had an open-pore structure with pores whose size and geometry depended on the material's chemical composition. The compressive strengths of the scaffolds were in the range of 4-340 kPa and the compressive moduli in the range of 9-1960 kPa, the values of which increased with increasing content of polycaprolactone. Of the two materials with the same amount of polycaprolactone the compressive strengths and moduli were higher for the one containing inorganic fillers. The scaffolds absorbed water and underwent controlled degradation in vitro. The amount of absorbed water and susceptibility to degradation increased with the increasing content of the polyethylene oxide segment in the polymer chain and the presence in the material of calcium complexing moiety. All polyurethane scaffolds induced the deposition of calcium phosphate crystals, the structure and calcium:phosphorus atomic ratio of which depended on the chemical composition of the polyurethane and varied from 1.52-2.0.

In Vitro and in Vivo Characterization of a Foam-Like Polyurethane Bone Adhesive for Promoting Bone Tissue Growth

Overcoming the Dilemma of In Vivo Stable Adhesion and Sustained Degradation by the Molecular Design of Polyurethane Adhesives for Bone Fracture Repair

Polyacrylic acid-reinforced organic-inorganic composite bone adhesives with enhanced mechanical properties and controlled degradability

Hydrophilic competent and enhanced wet-bond strength castor oil-based bioadhesive for bone repair

Cystine dimethyl ester cross-linked PEG-poly(urethane-urea)/nano-hydroxyapatite composited biomimetic scaffold for bone defect repair

Development and Properties of UV ‐cured Poly (propylene Fumarate)/hydroxyapatite Composites Coatings As Potential Application for Bone Adhesive Tape

Biological Evaluation of Porous Aliphatic Polyurethane/hydroxyapatite Composite Scaffolds for Bone Tissue Engineering.

In Vitro and in Vivo Biological Characterizations of a New Poly(amino Acids)/calcium Sulfate Composite Material for Bone Regeneration

Preparation and Characterization of Porous Hydroxyapatite/β-Cyclodextrin-based Polyurethane Composite Scaffolds for Bone Tissue Engineering

Development of Arg-Based Biodegradable Poly(ester Urea) Urethanes and Its Biomedical Application for Bone Repair

Chemical Reaction Kinetics and the Characteristic Properties of Injectable Adhesives of Nano-Hydroxyapatite/ag3po4/polyurethane for Bone and Tooth Repair

Porous bioactive scaffold of aliphatic polyurethane and hydroxyapatite for tissue regeneration.

The Uniform Distribution of Hydroxyapatite in a Polyurethane Foam-Based Scaffold (PU/HAp) to Enhance Bone Repair in a Calvarial Defect Model

In vitro biocompatiability and mechanical properties of bone adhesive tape composite based on poly(butyl fumarate)/poly(propylene fumarate)-diacrylate networks

Preparation, degradation, and calcification of biodegradable polyurethane foams for bone graft substitutes

Bioactive Pore-Forming Bone Adhesives Facilitating Cell Ingrowth for Fracture Healing

Improved Cell Adhesion of Poly(amino Acid) Surface by Cyclic Phosphonate Modification for Bone Tissue Engineering

Preparation and Properties of Aliphatic Polyurethane/hydroxyapatite Composites by in Situ Polymerization

Surface polydopamine modification of bone defect repair materials: Characteristics and applications

Preparation, Physicochemical Characterization, and in Vitro and in Vivo Osteogenic Evaluation of a Bioresorbable, Moldable, Hydroxyapatite/poly(caprolactone-Co-lactide) Bone Substitute.

Preparation, characterization, and in vitro and in vivo biocompatibility evaluation of polymer (amino acid and glycolic acid)/hydroxyapatite composite for bone repair