Abstract:<section class="article-section__content">Nanoscale morphology of the active layer plays a crucial role in the power conversion efficiency (PCE) and stability of polymer solar cells (PSCs). Blending the photoactive layer with a third component to produce a ternary system is considered a reliable approach to tune the nanomorphology, thereby improving the device performance. Herein, poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]‐dithiophene)‐co‐(1,3‐di(5‐thiophen‐2‐yl)‐5,7‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4,5‐c′]dithiophene‐4,8‐dione))] (PBDB‐T): 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone))‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene) (ITIC) solar cells doped with a third small molecule are systematically investigated, namely, (5Z,5′Z)‐5,5′‐((7,7′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(benzo[c]1,2,5]thiadiazole‐7,4‐diyl))‐bis(methanylyl‐idene))bis(3‐ethyl‐2‐thioxothiazolidin‐4‐one) (FBR). Owing to the wide optical bandgap of FBR, blending PBDB‐T:ITIC with FBR increases the device's light‐harvesting capability in the short wavelength range (400–550 nm), which improves the short circuit current. Differential scanning calorimetry and grazing incidence wide angle X‐ray scattering analyses reveal that the FBR exhibits impressive miscibility with ITIC, leading to the formation of ITIC:FBR alloys. Optimum performance is achieved with a PBDB‐T:ITIC:FBR (1:0.8:0.2) cell, which yields a PCE of 11.17%, demonstrating a 10% improvement relative to the PBDB‐T:ITIC binary cell. Crucially, the ternary solar cells also show improved device stability, which is attributed to the formation of ITIC:FBR alloys suppressing the crystallization of ITIC. This study provides deep insights into the performance‐ and stability‐related improvements available to PSCs devices that incorporate a third conjugated small molecule. </section>

Performance Enhancement of Ternary Polymer Solar Cells Induced by Tetrafluorotetracyanoquinodimethane Doping

A Comprehensively Theoretical and Experimental Study of Carrier Generation and Transport for Achieving High Performance Ternary Blend Organic Solar Cells

PCDTBT8‐Doped PffBT4T‐2OD‐Based Ternary Solar Cells with Enhanced Open‐Circuit Voltage, Fill Factor, and Charge Separation Efficiency

Ternary Polymer Solar Cells Enabled Using Two Donor Polymers with Broad Absorption and Cascade LUMO Levels

Constructing High-Performance Ternary Device Using Analogous Polymer Donors

Enhanced short circuit current density and efficiency of ternary organic solar cells by addition of a simple copolymer third component

Achieving over 11% Power Conversion Efficiency in PffBT4T-2OD-based Ternary Polymer Solar Cells with Enhanced Open-Circuit-voltage and Suppressed Charge Recombination

Ternary Strategy Enables Non‐Halogenated Solvent‐Processed All‐Polymer Solar Cells with High Efficiency Over 18%

Improving charge transport and reducing non-radiative energy loss via a nonacyclic carbazole-based third component for over 18% efficiency polymer solar cells

Molecular Interactions Regulation by Adding a Third Component with High Miscibility Suppresses the Energetic Disorder and Reduces Energy Loss for Efficient Ternary Solar Cells

Simultaneous Performance and Stability Improvement of Ternary Polymer Solar Cells Enabled by Modulating the Molecular Packing of Acceptors

Enhanced and Balanced Charge Transport Boosting Ternary Solar Cells Over 17% Efficiency

Contrasting Effects of Energy Transfer in Determining Efficiency Improvements in Ternary Polymer Solar Cells

Designing a Highly Crystalline Polymer Donor with Alkylsilyl and Fluorine Substitution to Achieve Efficient Ternary Organic Solar Cells

Molecular Doping Increases the Semitransparent Photovoltaic Performance of Dilute Bulk Heterojunction Film with Discontinuous Polymer Donor Networks

High-Efficiency Ternary Organic Solar Cells with a Good Figure-of-Merit Enabled by Two Low-Cost Donor Polymers

Smart Ternary Strategy in Promoting the Performance of Polymer Solar Cells Based on Bulk‐Heterojunction or Layer‐By‐Layer Structure

Synergistically minimized nonradiative energy loss and optimized morphology achieved via the incorporation of small molecule donor in 17.7% efficiency ternary polymer solar cells

Molecular interaction regulation by adding a third component with high miscibility suppresses the energetic disorder and reduces energy loss for efficient ternary solar cells

Over 19.1% efficiency for sequentially spin-coated polymer solar cells by employing ternary strategy

Ternary strategy: An analogue as third component reduces the energy loss and improves the efficiency of polymer solar cells