Abstract:Carbonate-bearing fluids widely exist in different geological settings, and play important roles in transporting some elements such as the rare earth elements. They may be trapped as large or small fluid inclusions (with the size down to <1 μm sometimes), and record critical physical-chemical signals for the formations of their host minerals. Spectroscopic methods like Raman spectroscopy and infrared spectroscopy have been proposed as effective methods to quantify the carbonate concentrations of these fluid inclusions. Although they have some great technical advantages over the conventional microthermometry method, there are still some technical difficulties to overcome before they can be routinely used to solve relevant geological problems. The typical limitations include their interlaboratory difference and poor performance on micro fluid inclusions. This study prepared standard ion-distilled water and K2CO3 aqueous solutions at different molarities (from 0.5 to 5.5 mol/L), measured densities, collected Raman and infrared spectra, and explored correlations between the K2CO3 molarity and the spectroscopic features at ambient P-T conditions. The result confirms that the Raman O–H stretching mode can be used as an internal standard to determine the carbonate concentrations despite some significant differences among the correlations, established in different laboratories, between the relative Raman intensity of the C–O symmetric stretching mode and that of the O–H stretching mode. It further reveals that the interlaboratory difference can be readily removed by performing one high-quality calibration experiment, provided that later quantifying analyses are conducted using the same Raman spectrometer with the same analytical conditions. Our infrared absorption data were collected from thin fluid films (thickness less than ~2 μm) formed by pressing the prepared solutions in a Microcompression Cell with two diamond-II plates. The data show that both the O–H stretching mode and the O–H bending mode can be used as internal standards to determine the carbonate concentrations. Since the IR signals of the C–O antisymmetric stretching vibration of the CO32− ion, and the O–H stretching and bending vibrations from our thin films are very strong, their relative IR absorbance intensity, if well calibrated, can be used to investigate the micron-sized carbonate-bearing aqueous fluid inclusions. This study establishes the first calibration of this kind, which may have some applications. Additionally, our spectroscopic data suggest that as the K2CO3 concentration increases the aqueous solution forms more large water molecule clusters via more intense hydrogen-bonding. This process may significantly alter the physical and chemical behavior of the fluids.

Raman Spectroscopic Densimeter for Pure CO2 and CO2-H2O-NaCl Fluid Systems over a Wide P-T Range Up to 360 °C and 50 MPa

Raman Spectroscopic Measurements of Co2 Density: Experimental Calibration with High-Pressure Optical Cell (hpoc) and Fused Silica Capillary Capsule (fscc) with Application to Fluid Inclusion Observations

Conformity and Precision of Co2 Densimetry in Co2 Inclusions: Microthermometry Versus Raman Microspectroscopic Densimetry

Determination of Pressure in Aqueo-Carbonic Fluid Inclusions at High Temperatures from Measured Raman Frequency Shifts of CO2

CO2 Density‐Raman Shift Relation Derived from Synthetic Inclusions in Fused Silica Capillaries and Its Application

Density Measurements on Binary Mixtures (nitrogen + Carbon Dioxide and Argon + Carbon Dioxide) at Temperatures from (298.15 to 423.15) K with Pressures from (11 to 31) MPa Using a Single-Sinker Densimeter

In situ Raman spectroscopic measurement of the 13C/12C ratio in CO2: Experimental calibrations on the effects of fluid pressure, temperature and composition

A New Method for Measurement of Internal Pressure of Inclusions:CO2-Raman Spectrometry

High Temperatures and High Pressures Brillouin Scattering Studies of Liquid H2O+CO2 Mixtures

Density Measurement and PC-SAFT/tPC-PSAFT Modeling of the CO2 + H2O System over a Wide Temperature Range

In-situ Raman Microspectroscopy Study of Fluids in the H2O-CO2 System in Optical Fused Silica Capillary

Raman spectral characteristics of 12CO2/13CO2 and quantitative measurements of carbon isotopic compositions from 50 to 450 °C and 50 to 400 bar

Raman Spectroscopic Study of CO2-NaCl-H2O Mixtures in Synthetic Fluid Inclusions at High Temperatures

Use of intraoperative cell-salvage for autologous blood transfusions in metastatic spine tumour surgery: a systematic review.

Measurements of CO2 Temperature and Concentration in High Temperature Environment Based on Tunable Diode Laser Absorption Spectroscopy

The Four-Sinker Densimeter: A New Instrument for the Combined Investigation of Accurate Densities and Sorption Phenomena of Pure Gases and Gas Mixtures

Measurement and Modeling of the Densities for Co2 + Dodecane System from 313.55 K to 353.55 K and Pressures Up to 18 Mpa

Raman and Infrared Spectroscopic Quantification of the Carbonate Concentration in K2CO3 Aqueous Solutions with Water As an Internal Standard

In Situ High P-T Raman Spectroscopy and Laser Heating of Carbon Dioxide.

Development and Metrological Characterization of a Tunable Diode Laser Absorption Spectroscopy (TDLAS) Spectrometer for Simultaneous Absolute Measurement of Carbon Dioxide and Water Vapor

Accurate Density Measurements on Ternary Mixtures (carbon Dioxide + Nitrogen + Argon) at Temperatures from (323.15 to 423.15) K with Pressures from (3 to 31) MPa Using a Single-Sinker Densimeter