Abstract:This paper conceptualizes a novel passive vibration control system comprising a tuned mass damper-inerter (TMDI) contained within a seismically isolated rooftop and investigates numerically its effectiveness for seismic response mitigation of building structures. The working principle of the proposed isolated rooftop tuned mass damper-inerter (IR-TMDI) system relies on the yielding of typical elastomeric isolators (e.g. lead rubber bearings) under severe earthquake ground motions to create a flexible rooftop which, in turn, increases the efficacy of the TMDI for seismic vibrations suppression. Herein, a nonlinear mechanical model is considered to explore the potential of IR-TMDI whereby the primary building structure is taken as linear damped single-mode system, while the Bouc–Wen model is used to capture the nonlinear/hysteretic behaviour of the rooftop isolators. An equivalent linear system (ELS), derived through statistical linearization, is used to expedite the optimal IR-TMDI tuning for different isolated rooftop properties, inertance, and primary structure natural period. To this aim, white noise excitations with different intensities as well as Kanai–Tajimi excitations for different soil conditions are considered. It is found that tuning for maximizing TMDI seismic energy dissipation is more advantageous than tuning for minimizing primary structure displacement or acceleration response since it lowers deflection and force demands to the isolators and to the inerter. Further, significant primary structure displacement and acceleration reductions are achieved as the effective rooftop flexibility increases through reduction of the nominal strength of the isolators, which verifies the intended working principle of the IR-TMDI. This is also confirmed through response history analyses to the nonlinear model under benchmark recorded ground motions. Moreover, for IR-TMDI with sufficiently flexible isolators, improved seismic structural performance with concurrent reduced deflection and force demands at the isolators is shown for all considered stochastic excitations as the inertance scales-up, which is readily achievable technologically. Thus, it is concluded that the IR-TMDI mitigates effectively structural seismic response without requiring the inerter to span several floors, as suggested in previous studies, thus extending the TMDI applicability to both existing and low-rise new-built structures.

Tuned Inerter Dampers for Civil Structures Subjected to Earthquake Ground Motions: Optimum Design and Seismic Performance

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Optimum design and performance evaluation of the tuned inerter-negative-stiffness damper for seismic protection of single-degree-of-freedom structures

Parameters Optimization and Performance Evaluation of the Tuned Inerter Damper for the Seismic Protection of Adjacent Building Structures

Analytical optimal design and performance evaluation of series tuned inerter damper for ground motion excited structures

Geometrically nonlinearity analysis and performance evaluation of tuned inerter dampers for multidirectional seismic isolation

Closed-form optimal design of the tuned inerter damper (TID) connecting adjacent flexible buildings

Damping Performance and Optimal Design of Mid-Story Isolation System with Tuned Inerter Damper

Optimum design and performance of a base-isolated structure with tuned mass negative stiffness inerter damper

Optimal Design Formula for Tuned Mass Damper Based on an Analytical Solution of Interaction between Soil and Structure with Rigid Foundation Subjected to Plane SH-Waves

Optimum tuning of Tuned Mass Dampers for frame structures under earthquake excitation

Inerter-based tuned mass dampers for response control of multi-degree-of-freedom structures subjected to wind and earthquake excitations

Parameter Optimization and Application for the Inerter-Based Tuned Type Dynamic Vibration Absorbers

Multi-objective optimal design of Tuned Mass Damper Inerter for base isolated structures

Seismic demand-oriented design of hybrid base-isolated building with the tuned inerter eddy current damper

An inerter-based electromagnetic damper for civil structures: Modeling, testing, and seismic performance

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Dynamic model and earthquake response of a hybrid isolated system with tuned inerter dampers for nuclear power plants

Dynamic characteristics of a novel inerter-enhanced tuned mass damper for structural vibration control

Optimized Design of a Tuned Mass Damper Inerter (TMDI) Applied to Circular Section Members of Transmission Towers

A novel nonlinear isolated rooftop tuned mass damper-inerter (IR-TMDI) system for seismic response mitigation of buildings