Abstract:The series tuned inerter dampers (STID) with distributed inerters are proposed in this paper to suppress seismic response for ground motion excited structures with broadband characteristics. In order to reveal the mechanism of the STID for vibration mitigation, the dimensionless displacement objective function of a single degree of freedom structure equipped with an STID under random Gaussian white noise base excitations is thereupon derived. Based on the principle of the reasonable distribution of inertance, the analytical optimal design parameters of STID are obtained under constraint for total inerter-mass ratio. The vibration mitigation performance of the STID is evaluated and further compared with the tuned inerter damper (TID), tuned mass damper (TMD) and typical series dampers using same mass ratio or inerter-mass ratio when structure is subjected to harmonic and random excitation. Results demonstrate that the performance of structural vibration control and broadband characteristics of STID outperform both the TMD and TID. On the condition of same inerter-mass ratio, the deformation enhancement of damping element can be further increased compared with TID because of dual-tuning effect of series inerters. The higher vibration control performance of STID is realized by using very small nominal damping ratio compared with the TMD and TID. Meanwhile, there exist two grounded inerters in STID compared to other series dampers, and both two subsystems are not affected by base random acceleration excitation which also brings STID a wider VSB and better seismic response mitigation effect. Substantially, due to STID is a type of dual-grounded inerter-based device, for force and base acceleration excited main system, the optimal expressions are identical. Hence, STID can adapt to more complex practical engineering and random and diverse excitations. Hence, the STID can be deemed to be a broadband, high effectiveness and high-performance inerter system. Meanwhile, considering low damping, lightweight and flexible install of STID, it is easier for implementation in practical engineering.

Parameters Optimization and Performance Evaluation of the Tuned Inerter Damper for the Seismic Protection of Adjacent Building Structures

Closed-form optimal design of the tuned inerter damper (TID) connecting adjacent flexible buildings

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Parameter optimization of vibration control system for adjacent building structures based on negative stiffness inerter damper

Damping Performance and Optimal Design of Mid-Story Isolation System with Tuned Inerter Damper

Optimum design and performance evaluation of the tuned inerter-negative-stiffness damper for seismic protection of single-degree-of-freedom structures

Seismic demand-oriented design of hybrid base-isolated building with the tuned inerter eddy current damper

Parameter Optimization and Application for the Inerter-Based Tuned Type Dynamic Vibration Absorbers

Dynamic model and earthquake response of a hybrid isolated system with tuned inerter dampers for nuclear power plants

Analytical optimal design and performance evaluation of series tuned inerter damper for ground motion excited structures

Optimal Design Formula for Tuned Mass Damper Based on an Analytical Solution of Interaction between Soil and Structure with Rigid Foundation Subjected to Plane SH-Waves

Seismic Optimization for Hysteretic Damping-Tuned Mass Damper (HD-TMD) Subjected to White-Noise Excitation

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Performance‐based seismic design of tuned inerter dampers

Parameter Optimization Of Multi-Tmds For Wind-Excited Vibration Suppression Of Tall Buildings

RANDOM SEISMIC RESPONSE ANALYSIS OF ADJACENT BUILDINGS COUPLED WITH NON-LINEAR HYSTERETIC DAMPERS

Multi-Performance Economical Optimization of Base Isolation System with Tuned Inerter Negative Stiffness Damper Subjected to Non-Stationary Seismic Excitation

Geometrically nonlinearity analysis and performance evaluation of tuned inerter dampers for multidirectional seismic isolation

Optimal design and performance evaluation of a novel hysteretic friction tuned inerter damper for vibration control systems

Multi-objective optimization and seismic performance verification of multiple tuned impact dampers for nonlinear benchmark building

Enhancing the Seismic Performance of Adjacent Building Structures Based on TVMD and NSAD