Abstract:This paper conceptualizes a novel passive vibration control system comprising a tuned mass damper-inerter (TMDI) contained within a seismically isolated rooftop and investigates numerically its effectiveness for seismic response mitigation of building structures. The working principle of the proposed isolated rooftop tuned mass damper-inerter (IR-TMDI) system relies on the yielding of typical elastomeric isolators (e.g. lead rubber bearings) under severe earthquake ground motions to create a flexible rooftop which, in turn, increases the efficacy of the TMDI for seismic vibrations suppression. Herein, a nonlinear mechanical model is considered to explore the potential of IR-TMDI whereby the primary building structure is taken as linear damped single-mode system, while the Bouc–Wen model is used to capture the nonlinear/hysteretic behaviour of the rooftop isolators. An equivalent linear system (ELS), derived through statistical linearization, is used to expedite the optimal IR-TMDI tuning for different isolated rooftop properties, inertance, and primary structure natural period. To this aim, white noise excitations with different intensities as well as Kanai–Tajimi excitations for different soil conditions are considered. It is found that tuning for maximizing TMDI seismic energy dissipation is more advantageous than tuning for minimizing primary structure displacement or acceleration response since it lowers deflection and force demands to the isolators and to the inerter. Further, significant primary structure displacement and acceleration reductions are achieved as the effective rooftop flexibility increases through reduction of the nominal strength of the isolators, which verifies the intended working principle of the IR-TMDI. This is also confirmed through response history analyses to the nonlinear model under benchmark recorded ground motions. Moreover, for IR-TMDI with sufficiently flexible isolators, improved seismic structural performance with concurrent reduced deflection and force demands at the isolators is shown for all considered stochastic excitations as the inertance scales-up, which is readily achievable technologically. Thus, it is concluded that the IR-TMDI mitigates effectively structural seismic response without requiring the inerter to span several floors, as suggested in previous studies, thus extending the TMDI applicability to both existing and low-rise new-built structures.

A novel nonlinear isolated rooftop tuned mass damper-inerter (IR-TMDI) system for seismic response mitigation of buildings

Inerter-based tuned mass dampers for response control of multi-degree-of-freedom structures subjected to wind and earthquake excitations

An enhanced base isolation system equipped with optimal tuned mass damper inerter (TMDI)

Optimal design of a novel tuned mass-damper–inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems

Optimal tuned mass-damper-inerter (TMDI) design in wind-excited tall buildings for occupants’ comfort serviceability performance and energy harvesting

Experimental study and numerical modeling of nonlinear dynamic response of SDOF system equipped with tuned mass damper inerter (TMDI) tested on shaking table under harmonic excitation

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Application of Semi-active TMD to Tilted High-Rise Building Structure Subjected to Seismic Loads

On the optimization of Tuned Mass Damper Inerter (TMDI) systems for buildings subjected to real ground motions using slime mould algorithm

An innovative methodology for hybrid vibration control (MR+TMD) of buildings under seismic excitations

Optimum tuning of Tuned Mass Dampers for frame structures under earthquake excitation

Optimizing Seismic Performance of Tuned Mass Dampers at Various Levels in Reinforced Concrete Buildings

Seismic control of tall buildings using vertically distributed multiple tuned mass dampers

Seismic demand-oriented design of hybrid base-isolated building with the tuned inerter eddy current damper

Design and optimization of roof-top fire water tanks as compliant deep tank dampers-inerter for seismic protection of multi-storeyed buildings

Optimum design and performance of a base-isolated structure with tuned mass negative stiffness inerter damper

Control effect of large tuned mass damper used for seismic retrofitting of existing high‐rise building

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Tuned Viscous Mass Damper (TVMD) Coupled Wall System for Enhancing Seismic Performance of High-Rise Buildings

TMD Design by an Entropy Index for Seismic Control of Tall Shear-Bending Buildings

An inerter-based electromagnetic damper for civil structures: Modeling, testing, and seismic performance