Abstract:This paper conceptualizes a novel passive vibration control system comprising a tuned mass damper-inerter (TMDI) contained within a seismically isolated rooftop and investigates numerically its effectiveness for seismic response mitigation of building structures. The working principle of the proposed isolated rooftop tuned mass damper-inerter (IR-TMDI) system relies on the yielding of typical elastomeric isolators (e.g. lead rubber bearings) under severe earthquake ground motions to create a flexible rooftop which, in turn, increases the efficacy of the TMDI for seismic vibrations suppression. Herein, a nonlinear mechanical model is considered to explore the potential of IR-TMDI whereby the primary building structure is taken as linear damped single-mode system, while the Bouc–Wen model is used to capture the nonlinear/hysteretic behaviour of the rooftop isolators. An equivalent linear system (ELS), derived through statistical linearization, is used to expedite the optimal IR-TMDI tuning for different isolated rooftop properties, inertance, and primary structure natural period. To this aim, white noise excitations with different intensities as well as Kanai–Tajimi excitations for different soil conditions are considered. It is found that tuning for maximizing TMDI seismic energy dissipation is more advantageous than tuning for minimizing primary structure displacement or acceleration response since it lowers deflection and force demands to the isolators and to the inerter. Further, significant primary structure displacement and acceleration reductions are achieved as the effective rooftop flexibility increases through reduction of the nominal strength of the isolators, which verifies the intended working principle of the IR-TMDI. This is also confirmed through response history analyses to the nonlinear model under benchmark recorded ground motions. Moreover, for IR-TMDI with sufficiently flexible isolators, improved seismic structural performance with concurrent reduced deflection and force demands at the isolators is shown for all considered stochastic excitations as the inertance scales-up, which is readily achievable technologically. Thus, it is concluded that the IR-TMDI mitigates effectively structural seismic response without requiring the inerter to span several floors, as suggested in previous studies, thus extending the TMDI applicability to both existing and low-rise new-built structures.

Experimental study and numerical modeling of nonlinear dynamic response of SDOF system equipped with tuned mass damper inerter (TMDI) tested on shaking table under harmonic excitation

Optimal design of a novel tuned mass-damper–inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems

Parameter Optimization and Application for the Inerter-Based Tuned Type Dynamic Vibration Absorbers

Experimental shake table validation of damping behaviour in inerter-based dampers

Optimum design and performance evaluation of the tuned inerter-negative-stiffness damper for seismic protection of single-degree-of-freedom structures

Optimal Design of Tuned Mass Dampers With Variable Inerter and Damping

Inerter-based tuned mass dampers for response control of multi-degree-of-freedom structures subjected to wind and earthquake excitations

Optimized Design of a Tuned Mass Damper Inerter (TMDI) Applied to Circular Section Members of Transmission Towers

An enhanced base isolation system equipped with optimal tuned mass damper inerter (TMDI)

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Tuned mass-damper-inerter control of wind-induced vibration of flexible structures based on inerter location

Assessment of the tuned mass damper inerter for seismic response control of base‐isolated structures

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Dynamic characteristics of a novel inerter-enhanced tuned mass damper for structural vibration control

A unified method for parameter optimization and dynamic characteristics analysis of tuned mass damper inerter

Inerter-Connected Double Tuned Mass Damper for Passive Control of Buildings under Seismic Excitation

Filter-based inerter location dependence analysis approach of Tuned mass damper inerter (TMDI) and optimal design

Design of MDOF structure with damping enhanced inerter systems

A novel nonlinear isolated rooftop tuned mass damper-inerter (IR-TMDI) system for seismic response mitigation of buildings

Optimal tuned mass-damper-inerter (TMDI) design in wind-excited tall buildings for occupants’ comfort serviceability performance and energy harvesting

Analytical optimal design and performance evaluation of series tuned inerter damper for ground motion excited structures