Abstract:Recent reports on the selective laser melting (SLM) process under a vacuum or low ambient pressure have shown fewer defects and better surface quality of the as-printed products. Although the physical process of SLM in a vacuum has been investigated by high-speed imaging, the underlying mechanisms governing the heat transfer and molten flow are still not well understood. Herein, we first developed a mesoscopic model of SLM under variable ambient pressure based on our recent laser-welding studies. We simulated the transport phenomena of SLM 316L stainless steel powders under atmospheric and 100 Pa ambient pressure. For typical process parameters (laser power: 200 W; scanning speed: 2 m∙s−1; powder diameter: 27 μm), the average surface temperature of the cavity approached 2800 K under atmospheric pressure, while it came close to 2300 K under 100 Pa pressure. More vigorous fluid flow (average speed: 4 m∙s−1) was observed under 100 Pa ambient pressure, because the pressure difference between the evaporation-induced surface pressure and the ambient pressure was relatively larger and drives the flow under lower pressure. It was also shown that there are periodical ripple flows (period: 14 μs) affecting the surface roughness of the as-printed track. Moreover, the molten flow was shown to be laminar because the Reynolds number is less than 400 and is far below the critical value of turbulence; thus, the viscous dissipation is significant. It was demonstrated that under a vacuum or lower ambient pressure, the ripple flow can be dissipated more easily by the viscous effect because the trajectory length of the ripple is longer; thus, the surface quality of the tracks is improved. To summarize, our model elucidates the physical mechanisms of the interesting transport phenomena that have been observed in independent experimental studies of the SLM process under variable ambient pressure, which could be a powerful tool for optimizing the SLM process in the future.

Surface Morphology Evolution During Pulsed Selective Laser Melting: Numerical and Experimental Investigations

PARTICLE SCALE NUMERICAL MODELLING OF HEAT TRANSFER AND MELT POOL DYNAMICS IN SELECTIVE LASER MELTING

A Novel Method for the Molten Pool and Porosity Formation Modelling in Selective Laser Melting

Numerical Study of the Pore Defects Formation Mechanisms in Selective Laser Melting Process

Mesoscale Modelling of Selective Laser Melting: Thermal Fluid Dynamics and Microstructural Evolution

Selective Laser Melting under Variable Ambient Pressure: A Mesoscopic Model and Transport Phenomena

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing

On the role of energy input in the surface morphology and microstructure during selective laser melting of Inconel 718 alloy

On the Role of Melt Flow into the Surface Structure and Porosity Development During Selective Laser Melting

Mesoscopic Study of Thermal Behavior, Fluid Dynamics and Surface Morphology During Selective Laser Melting of Ti-based Composites

A Computational Model of Melt Pool Morphology for Selective Laser Melting Process

Contact Angle Evolution During Selective Laser Melting

A New Mesoscale Model for Selective Laser Melting to Unravel the Dependence of Microstructure on Printing Areas for Inconel 625

Evolution Mechanism of Surface Morphology and Internal Hole Defect of 18ni300 Maraging Steel Fabricated by Selective Laser Melting

Simulation of the Solute Transport and Microstructure Evolution During the Selective Laser Melting Process

Powder-scale Multi-Physics Modeling of Multi-Layer Multi-Track Selective Laser Melting with Sharp Interface Capturing Method

Influence of Laser Processing Strategy and Remelting on Surface Structure and Porosity Development During Selective Laser Melting of a Metallic Material

Investigation on Surface Roughness in Electron Beam Selective Melting by Mesoscale Model