Preparation and Wear Resistance Properties of Thermosetting Polyimide Composites Containing Solid Lubricant Fillers

Ming Yang,Chunhong Zhang,Guangdong Su,Yanjun Dong,Tadele Daniel Mekuria,Qingtao Lv

DOI: https://doi.org/10.1016/j.matchemphys.2019.122034

IF: 4.778

2019-01-01

Materials Chemistry and Physics

Abstract:A polyimide (PI) oligomer end-capping with 4-phenylethynyl anhydride was successfully synthesized to prepare a series of thermosetting PI composites containing solid lubricant fillers MoS2, SiO2, Si3N4, or graphite via hotpress-molding technique. Friction and wear tests were carried out under dry friction condition and the effects of friction and wear properties of PI containing difference solid fillers were also investigated. The results indicated that the type and content of the incorporation fillers played an important role in the wear resistance properties of PI composites. Among the prepared composites, PI/MoS2-20 wt% composites showed the lowest friction coefficient (0.11), which was decreased by 47.6% compared to pure PI. While PI/graphite-20 wt% composites showed the least wear loss of 0.864 mg, which was a 90.4% decrease compared to pure PI. Furthermore, the tensile strength of PI/graphite-20 wt% composites showed an increase of 18.7% compared to pure PI. Moreover, the thermal stability and thermal conductivity of PI was improved with the incorporation fillers. The wear type of worn surfaces gradually changed from adhesion wear and fatigue wear of pure PI into abrasive wear of PI composites. The resultant PI composites exhibited good wear resistance, mechanical, thermal conductivity and thermal stability properties, suggesting their potential applications as high-performance friction materials.