Abstract:With the aim of attenuating thrust ripples in ultraprecision air-bearing linear feed systems, a simple and effective internal model control (IMC) system is herein presented based on a modified modeling and identification method of permanent magnet linear synchronous motors (PMLSMs). First, flux linkage equations were used to describe the volt–ampere characteristics of PMLSMs and provide a thrust expression in a differential form based on the principle of virtual work. Then, an analytical formula was obtained through derivation based on the condition of field-oriented control. On this basis, an IMC compensator was designed using an inverse model to attenuate nonlinear thrust effects, and an extended Kalman filter (EKF) was adopted to estimate the actual current in an analog linear amplifier. The boundedness of the nonlinear system was analyzed based on the convergence condition; furthermore, the stability of the proposed IMC compensator with EKF could be guaranteed. Then, an accurate model and thrust parameters were obtained using an identification experiment on an air-bearing linear platform driven by a linear analog amplifier. To demonstrate the coupling effect of current on thrust and confirm the effectiveness of the proposed method, both simulations and experiments were performed at a uniform velocity under extra loads of different weights; then, an extended state observer (ESO) was introduced as a comparative method. Finally, the results of the following error indicated that the proposed method demonstrated improved performance in terms of overcoming the influence of nonlinearity and that it results in smooth velocities in steady states.

Force Ripple Estimation and Compensation of PMLSM with Incremental Extended State Modeling-Based Kalman Filter: A Practical Tuning Method

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

Iterative Feedforward Tuning for A PMLSM with Unknown Time Delay and Current-Dependent Force Ripple.

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Force Ripple Compensation and Robust Predictive Current Control of PMLSM Using Augmented Generalized Proportional–Integral Observer

Modified Modeling and Internal Model Control Method of Thrust Ripples in PMLSMs for Ultraprecision Air-Bearing Linear Feed Systems

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

A New Linear Motor Force Ripple Compensation Method Based on Inverse Model Iterative Learning and Robust Disturbance Observer.

An Effective Control Strategy for PMLSM Velocity Smoothness Control at Low-Velocity of Ultra-Precision Air Bearing Linear Feed Stage

Force ripple suppression strategy in permanent magnet linear synchronous motor

Force Ripple Suppression of Permanent Magnet Linear Synchronous Motor Based on Fuzzy Adaptive Kalman Filter

Force Ripple Suppression for Permanent Magnet Linear Synchronous Motor

High Performance PMSM Control System Based on Extended Kalman Filter

THRUST RIPPLE OPTIMIZATION AND EXPERIMENT FOR PMLSM

A Simple Force Ripple Compensation Method for Linear Motor Servo System

Model Predictive Current Control of Permanent Magnet Synchronous Motor Based on Extended Kalman Filter

PMSM Mechanical Sensor-Less Vector Control Based on Extended Kalman Filter

Ripple force compensation based on ILC–ASMC for linear servo system

On-line Estimation of Permanent Magnet Flux Linkage Ripple for PMSM Based on a Kalman Filter

Force Ripple Compensation of the Directly-Driven Linear Motors Via Iterative Tuning Feed-Forward Controller

Speed Ripple Minimization of Permanent Magnet Synchronous Motor Based on Model Predictive and Iterative Learning Controls