Abstract:This paper proposes a nonlinear flux linkage observer for the PMSM speed controls without motion sensors, introducing the deviation among the real stator flux linkage and an estimated stator flux linkage to suppress feedback and integral flux drift. In the position detection of an interior PMSM without a speed sensor, the traditional back EMF integration method uses a pure integrator, or LPF, to estimate the stator flux. Its inherent defects inevitably lead to inaccurate flux estimation, which directly affects the estimation of the motor mover position, resulting in the decline in motor control operation and the distortion of phase current. This paper uses an improved integrator with adaptive compensation. The projected value of the stator flux linkage has been derived from the estimated value of the rotor permanent magnetic flux linkage position angle and the algebraic model (m-model) of the stator flux linkage, along with a synchronous coordinate system. The IPMSM stator coil flux linkage obtained from the stator coil current and integral voltage models in the static coordinate system is compared to form a feedback closed-loop to suppress the integral drift, and using the cross-product approach of the actual and estimated flux linkage yields the projected value of the IPMSM rotor speed and position through a PLL. Compared with the existing motion-sensorless observers, the methodology proposed in this article is simple and exhibits better dynamic and static estimation performance. Extensive and comprehensive MATLAB computer simulation and experimental findings validate the proposed motion-sensorless control mechanism.

On-line Estimation of Permanent Magnet Flux Linkage Ripple for PMSM Based on a Kalman Filter

On-line Estimation of Permanent-magnet Flux Linkage Ripple for PMSM

Sensorless Control Of Permanent Magnet Synchronous Motors With Compensation For Parameter Uncertainty

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Dynamic Permanent Magnet Flux Estimation of Permanent Magnet Synchronous Machines

Sensorless Control Method Of Pmsm Based On Extended Kalman Filter

Magnet Demagnetization Observation or Permanent Magnet Synchronous Motor

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

An EMF Observer for PMSM Sensorless Drives Adaptive to Stator Resistance and Rotor Flux Linkage

On-Line Identification of Permanent Magnet Flux in IPMSM Drive

Online Identification of Permanent Magnet Flux Based on Extended Kalman Filter for IPMSM Drive With Position Sensorless Control

Sensorless Control of Ipmsm Using Rotor Flux Observer

Rotor Speed and Position Estimation Analysis of Interior PMSM Machines in Low and Medium-High Speed Regions Adopting an Improved Flux Observer for Electric Vehicle Applications

High Performance PMSM Control System Based on Extended Kalman Filter

Nonlinear Flux Observer for Sensorless Control of IPMSM Based on a Novel Regression Model

Rotor Position Estimation for IPMSM Based on Linear Flux

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Hybrid Position Observer of IPMSM with Online Rotor Flux Identification

Research on Sensorless Control Method of PMSM Based on an Adaptive Sliding Mode Observer

Permanent magnet flux identification of IPMSM based on EKF with speed sensorless control

An Improved Rotor Flux Estimation Strategy for Position-Sensorless Control of Surface-Mount Permanent Magnet Synchronous Motor.