Abstract:With the aim of attenuating thrust ripples in ultraprecision air-bearing linear feed systems, a simple and effective internal model control (IMC) system is herein presented based on a modified modeling and identification method of permanent magnet linear synchronous motors (PMLSMs). First, flux linkage equations were used to describe the volt–ampere characteristics of PMLSMs and provide a thrust expression in a differential form based on the principle of virtual work. Then, an analytical formula was obtained through derivation based on the condition of field-oriented control. On this basis, an IMC compensator was designed using an inverse model to attenuate nonlinear thrust effects, and an extended Kalman filter (EKF) was adopted to estimate the actual current in an analog linear amplifier. The boundedness of the nonlinear system was analyzed based on the convergence condition; furthermore, the stability of the proposed IMC compensator with EKF could be guaranteed. Then, an accurate model and thrust parameters were obtained using an identification experiment on an air-bearing linear platform driven by a linear analog amplifier. To demonstrate the coupling effect of current on thrust and confirm the effectiveness of the proposed method, both simulations and experiments were performed at a uniform velocity under extra loads of different weights; then, an extended state observer (ESO) was introduced as a comparative method. Finally, the results of the following error indicated that the proposed method demonstrated improved performance in terms of overcoming the influence of nonlinearity and that it results in smooth velocities in steady states.

Iterative Feedforward Tuning for A PMLSM with Unknown Time Delay and Current-Dependent Force Ripple.

Force Ripple Estimation and Compensation of PMLSM with Incremental Extended State Modeling-Based Kalman Filter: A Practical Tuning Method

Force Ripple Suppression for Permanent Magnet Linear Synchronous Motor

Precise and Robust Control of Permanent Magnet Linear Synchronous Motor in a High-Speed Feeding System

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

Iterative Learning Control Design with High-Order Internal Model for Permanent Magnet Linear Motor

Speed Ripple Minimization of Permanent Magnet Synchronous Motor Based on Model Predictive and Iterative Learning Controls

A New Linear Motor Force Ripple Compensation Method Based on Inverse Model Iterative Learning and Robust Disturbance Observer.

Model predictive flux control for permanent magnet synchronous motor

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Force Ripple Compensation and Robust Predictive Current Control of PMLSM Using Augmented Generalized Proportional–Integral Observer

Force Ripple Compensation of the Directly-Driven Linear Motors Via Iterative Tuning Feed-Forward Controller

Parameters Identification and Adaptive Feedforward Control of Permanent Magnent Linear Synchronous Motor

Fast Finite-Time Tracking Control Strategy for Permanent Magnet Synchronous Motor

Force ripple suppression strategy in permanent magnet linear synchronous motor

Modified Modeling and Internal Model Control Method of Thrust Ripples in PMLSMs for Ultraprecision Air-Bearing Linear Feed Systems

Adaptive Deadbeat Predictive Current Control for PMSM with Feed Forward Method.

Inner Loop Design for PMLSM Drives with Thrust Ripple Compensation and High-Performance Current Control

Extended State Observer-Based Data-Driven Iterative Learning Control for Permanent Magnet Linear Motor with Initial Shifts and Disturbances.

Research on Iterative Learning Control of PMLSM